Instrukcja obsługi Maytag W10115773

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Maytag W10115773 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 3 użytkowników na średnio 4.3 gwiazdek

Instruction Sheet W10257618A 3/09

Instruction Sheet

for Backsplash Kit Installation

(30”/36”/48” Range or Cooktop Application)

1

1. Assemble rear panel to backsplash using 7 of the 10 screws

provide in kit.

2. Position the rear panel against the inner flange of the

backsplash as shown in .Figure 1

3. Install mounting screws (7) through the backsplash fl ange

mounting holes into rear panel and tighten securely, set

aside.

4. Remove the grates from range or cooktop.

5. Remove rear island trim from range or cooktop by removing

three (3) screws from the rear of the appliance. Retain screws

for future use. See Figure 2.

Kit Contains:

(1) Backsplash

(1) Panel, Rear

(10) Screws, 8-18 x .375”

(1) Instruction Sheet

6. Position new backsplash assembly where the island trim was

previously removed. Align holes in rear of range or cooktop

with backsplash assembly and secure using the three (3)

screws removed in step 5. See Figure 3.

7. Install the three (3) additional screws provided with kit to the

front side of the backsplash assembly and tighten securely.

See .Figure 4

FIGURE 1

SCREWS

(7 LOCATIONS)

BACKSPLASH

REAR PANEL

(NOTE LOCATION)

FIGURE 2

SCREWS (3)

ISLAND TRIM

FIGURE 3

SCREWS (3)

FIGURE 4

SCREWS (3)

8. Reinstall the grates onto the range or cooktop.

© Whirlpool Corporation 2009

(All Rights Reserved)

Specyfikacje produktu