Instrukcja obsługi Microchip MD1715


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Microchip MD1715 (18 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 6 użytkowników na średnio 4.3 gwiazdek

Strona 1/18
2018 Microchip Technology Inc. DS20005921A-page 1
MD1715
Features
Advanced CMOS Technology
±4.75 to 12.9V Gate Drive Voltage
2A Output Source and Sink Current
6.5 ns Rise and Fall Time with 1 nF Load
10 ns Propagation Delay
±2 ns Matched Delay Times
12 Matched Channels
1.8V to 3.3V CMOS Logic Interface
Smart Logic Threshold
Low-inductance Package
Applications
Medical Ultrasound Imaging
Piezoelectric Transducer Drivers
Metal Flaw Detection
Non-destructive Testing (NDT)
General Description
The MD1715, paired with Microchip’s TC8020, forms a
2-channel five-level high-voltage high-speed transmit
pulser chip set. The chip set is designed for medical
ultrasound imaging applications but can also be used
for metal flaw detection, NDT and piezoelectric
transducer drivers.
The MD1715 is a 2-channel logic controller circuit with
12 low-impedance MOSFET gate drivers. There are
two sets of control logic inputs—one for Channel A and
one for Channel B. Each channel consists of three pairs
of MOSFET gate drivers. These drivers are designed to
match the drive requirements of Microchip’s TC8020.
The TC8020 is the output stage of the pulser, with six
pairs of MOSFETs. Each pair consists of a P-channel
and an N-channel MOSFET. They are designed to
have the same impedance and can provide typical
peak currents of ±3.5A at 200V.
Package Type
See Table 2-1 for pin information.
40-lead QFN
(Top view)
1
40
2-Channel 5-Level High-Speed Ultrasound Driver IC


Specyfikacje produktu

Marka: Microchip
Kategoria: Niesklasyfikowane
Model: MD1715

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Microchip MD1715, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Microchip

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025