Instrukcja obsługi Microchip PD-9512-10GC

Microchip karta/adapter sieciowy PD-9512-10GC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Microchip PD-9512-10GC (27 stron) w kategorii karta/adapter sieciowy. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 4 użytkowników na średnio 4.8 gwiazdek

Pobierz PDF

Strona 1/27

PD-95XX-10GC

Multiport Multigig Series User Guide

Introduction

Microchip’s family of Power over Ethernet (PoE) Midspans, PD-95XX-10GC/AC, inject power over data-carrying

Ethernet cabling. Employing these devices reduces the need for AC outlets, local UPS, and AC/DC adapters near

powered devices (PDs) .

PD-9506-10GC, PD-9512-10GC, and PD 9524-10GC Midspans support 6, 12, and 24 ports respectively, in a-

2.5/5/10GBaseT Ethernet network, over TIA/EIA-568 category 5e/6/6A cabling. The PD-95xx-10GC family can

provide up to 60W according to the new IEEE

® 802.3bt standards. DC power is fed over both spare and data

pairs of wires within a cable (1/2, 3/6, 4/5, and 7/8) to terminal units.

PoE Midspan normally powers devices that are PoE enabled or are equipped to receive PoE. These devices are

called PDs.

PoE Midspans offer the following important features.

• Safe and reliable power over an existing Ethernet infrastructure.

• Remote management using web control and/or simple network management protocol (SNMP)v3.

• High-level of network security.

• Safe solution that protects network infrastructure.

• Standards compliant: IEEE 802.3bt.

• Provides safe power and data over a single RJ-45 cable.

and its subsidiaries

User Guide DS00004059A-page 1

Table of Contents

Introduction.....................................................................................................................................................1

1. Standards and Safety Guidelines............................................................................................................4

1.1. Part Numbers Definition............................................................................................................... 4

1.2. Electrical Compatibility Approvals................................................................................................ 4

1.3. Safety Standard Approvals...........................................................................................................4

1.4. CE Marking...................................................................................................................................4

1.5. Safety Information........................................................................................................................ 4

2. Information en Matière de Sécurité......................................................................................................... 6

2.1. Directives Générales.................................................................................................................... 6

2.2. Mises En Garde............................................................................................................................6

3. 2.5/5/10GBASE-TX Ports Definition........................................................................................................7

3.1. Data Input Ports........................................................................................................................... 7

3.2. Data and Power Output Ports...................................................................................................... 7

3.3. Indicators......................................................................................................................................7

3.4. Connectors................................................................................................................................... 8

4. PoE Midspan Installation.......................................................................................................................10

4.1. Background Information............................................................................................................. 10

4.2. Verifying Kit Contents................................................................................................................. 10

4.3. Rack Mounting Brackets............................................................................................................ 10

4.4. Installation Factors..................................................................................................................... 11

4.5. Connecting Ethernet Cables ......................................................................................................11

4.6. Connecting Power Cables.......................................................................................................... 11

4.7. Powering up the Unit.................................................................................................................. 11

5. Troubleshooting.....................................................................................................................................13

5.1. Preliminary Steps....................................................................................................................... 13

5.2. Troubleshooting Steps................................................................................................................13

6. Specifications........................................................................................................................................ 14

6.1. Physical Specifications...............................................................................................................14

6.2. Environmental Specifications..................................................................................................... 14

6.3. Electrical Specifications..............................................................................................................14

7. Microchip’s PowerView Pro ..................................................................................................................16

8. Power Backup and Power Redundancy Connection............................................................................ 17

8.1. Power Redundancy ................................................................................................................... 17

8.2. Power Backup ........................................................................................................................... 17

8.3. Connectors................................................................................................................................. 17

8.4. Connecting the Backup and Redundancy Connectors...............................................................18

8.5. Power Backup and Power Redundancy Indications...................................................................19

9. Contacting Technical Support .............................................................................................................. 21

PD-95XX-10GC

and its subsidiaries

User Guide DS00004059A-page 2

10. Ordering Information ............................................................................................................................ 22

11. Revision History.................................................................................................................................... 23

The Microchip Website.................................................................................................................................24

Product Change Notification Service............................................................................................................24

Customer Support........................................................................................................................................ 24

Microchip Devices Code Protection Feature................................................................................................ 24

Legal Notice................................................................................................................................................. 25

Trademarks.................................................................................................................................................. 25

Quality Management System....................................................................................................................... 26

Worldwide Sales and Service.......................................................................................................................27

PD-95XX-10GC

and its subsidiaries

User Guide DS00004059A-page 3

Specyfikacje produktu

Marka:	Microchip
Kategoria:	karta/adapter sieciowy
Model:	PD-9512-10GC
Wysokość produktu:	44 mm
Szerokość produktu:	271 mm
Głębokość produktu:	435 mm
Waga produktu:	5340 g
Certyfikat środowiskowy (zrównoważonego rozwoju):	CE, WEEE
Certyfikaty:	CE, WEEE
Gniazdko wyjścia DC:	Tak
Standardy komunikacyjne:	IEEE 802.3af, IEEE 802.3at, IEEE 802.3bt
Prędkość transferu danych przez Ethernet LAN:	10,100,1000 Mbit/s
Ilość portów Ethernet LAN (RJ-45):	12
Obsługa PoE:	Tak
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	0 - 90 %
Kod zharmonizowanego systemu (HS):	85044095
Pobór mocy:	60 W
Diody LED:	Zasilanie
Zakres temperatur (przechowywanie):	-20 - 70 °C
Dopuszczalna wilgotność względna:	0 - 95 %
Maksymalna temperatura termometru zwilżonego (wet bulb temp.) Podczas eksploatacji (w °f):	32 - 104 °F
Prąd wejściowy:	9 A
Rodzaj interfejsu sieci Ethernet:	2.5 Gigabit Ethernet, 5 Gigabit Ethernet, 10 Gigabit Ethernet
Dopuszczalna wysokość podczas eksploatacji (n.p.m.):	-400 - 3048 m
Częstotliwość adaptera AC:	50 - 60 Hz
Napięcie wejściowe adaptera AC:	100 - 240 V
Moc rzeczywista:	950 W
Power over Ethernet:	100 V