Instrukcja obsługi Microchip RN4871


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Microchip RN4871 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 7 użytkowników na średnio 4.7 gwiazdek

Strona 1/2
© Microchip Technology, Inc. 20 RN4870 v1.42 Release Notes 21
RN4870/ Firmware 71 1.42 Release Note
9/ / 01 2021
1 Overview
This release note provides details on the firmware Rev 1.42 that is released for the
RN4870 and RN4871 modules.
2 New Features
Rev 1.42 incorporates a new command to change the UART immediately
without the need for a reboot (unlike the SB command).
- SBI, <8-bit hex value>
- The input parameter is an 8-bit hex value in the range of 00 to 0B,
representing baud rate from 2400 to 921K as shown in table below.
-
Hex value
Baud rate
00
921000
01
460800
02
230400
03
115200
04
57600
05
38400
06
28800
07
19200
08
14400
09
9600
0A
4800
0B
2400
- Default: 03
- Example: SBI,07 //Set the UART baud rate to 19200
immediately
- Response: AOK //Success
- ERR //Syntax error or invalid parameter
3 Resolved Issues
Fixed ANSSI vulnerabilities
Fixed Sweyntooth vulnerabilities
Modified the SM command to limit the range of timers 2 and 3. The value can
be set for these timers should be between 0 to 0x0FFE.


Specyfikacje produktu

Marka: Microchip
Kategoria: Niesklasyfikowane
Model: RN4871

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Microchip RN4871, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Microchip

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025