Instrukcja obsługi Milwaukee M18 CLT
Milwaukee
Niesklasyfikowane
M18 CLT
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Milwaukee M18 CLT (8 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 9 użytkowników na średnio 4.7 gwiazdek
Strona 1/8
Cat. No.
M18 CLT
M18™ FUEL™ LINE TRIMMER
OPERATOR'S MANUAL
To reduce the risk of injury, user must read and understand operator's manual.
WARNING
2
IMPORTANT SAFETY
INSTRUCTIONS
WARNING
Read all safety warnings, instruc-
WLRQV LOOXVWUDWLRQV DQG VSHFL¿FD-
tions provided with this power tool. Failure to follow
all instructions listed below may result in electric shock,
¿UHDQGRUVHULRXVLQMXU\Save all warnings and in-
structions for future reference.
READ ALL INSTRUCTIONS
BEFORE USE
WORK AREA SAFETY
• Keep work area clean and well lit. Cluttered or
GDUNDUHDVLQYLWHDFFLGHQWV
• Do not operate power tools in explosive atmo-
VSKHUHVVXFKDVLQWKHSUHVHQFHRIÀDPPDEOH
OLTXLGVJDVHVRUGXVWPower tools create sparks
ZKLFKPD\LJQLWHWKHGXVWRUIXPHV
.HHSFKLOGUHQDQGE\VWDQGHUVDZD\ZKLOHRSHUDW-
ing a power tool. Distractions can cause you to lose
FRQWURO
•
'RQRWDOORZWREHXVHGDVDWR\&ORVHDWWHQWLRQ
LV QHFHVVDU\ ZKHQ XVHG E\ RU QHDU FKLOGUHQ
Store idle power tools out of the reach of chil-
dren and do not allow persons unfamiliar with
the power tool or these instructions to operate
the power tool. Power tools are dangerous in the
KDQGVRIXQWUDLQHGXVHUV
•
'RQRWXVHWKHWRROQHDUDQ\WKLQJWKDWLVEXUQLQJRU
smoking VXFKDVFLJDUHWWHVPDWFKHVRUKRWDVKHV
•To reduce the risk of health hazards from vapors
or dust, do not use tool near tool toxic, carcino-
genic or other hazardous materials such as as-
bestos, arsenic, barium, beryllium, lead, pesticides
RURWKHUKHDOWKHQGDQJHULQJPDWHULDOV
ELECTRICAL SAFETY
• Do not expose power tools to rain or wet condi-
tions. Do not immerse in water or spray with a
hose. Do not clean with a pressure washer. Water
entering a power tool will increase the risk of electric
VKRFN6WRUHWRROLQGRRUV
PERSONAL SAFETY
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
WKHLQÀXHQFHRIGUXJVDOFRKRORUPHGLFDWLRQA
moment of inattention while operating power tools
PD\UHVXOWLQVHULRXVSHUVRQDOLQMXU\
•Always wear eye protection. Use of this tool can
UHVXOWLQIRUHLJQREMHFWVEHLQJWKURZQLQWRH\HV
ZKLFKFDQUHVXOWLQH\HGDPDJH
•Wear a face or dust mask when working in dust
VLWXDWLRQV'XVWSDUWLFOHVFDQKDUP\RXUOXQJV
8VH SHUVRQDO SURWHFWLYH HTXLSPHQW Protective
equipment such as hearing protection, protective
clothing, and non-skid safety shoes used for ap-
SURSULDWHFRQGLWLRQVZLOOUHGXFHSHUVRQDOLQMXULHV
• Dress properly. Do not wear loose clothing or
jewelry. Keep your hair and clothing away from
moving parts. /RRVHFORWKHVMHZHOU\RUORQJKDLU
FDQEHFDXJKWLQPRYLQJSDUWV
'RQRWRYHUUHDFK.HHSSURSHUIRRWLQJDQGEDO-
ance at all times. This enables better control of the
SRZHUWRROLQXQH[SHFWHGVLWXDWLRQV
• Use the power tool, accessories, etc. in ac-
cordance with these instructions, taking into
account the working conditions and the work
WREHSHUIRUPHGUse of the power tool for opera-
tions different from those intended could result in a
KD]DUGRXVVLWXDWLRQ
• Prevent unintentional starting. Ensure the switch
LVLQWKHRIISRVLWLRQEHIRUHFRQQHFWLQJWRSRZHU
VRXUFHDQGRUEDWWHU\SDFNSLFNLQJXSRUFDUU\LQJ
the tool. &DUU\LQJSRZHUWRROVZLWK\RXU¿QJHURQ
the switch or eQHUJLVLQJ power tools that have the
VZLWFKRQLQYLWHVDFFLGHQWV
'RQRWOHWIDPLOLDULW\JDLQHGIURPIUHTXHQWXVH
RIWRROVDOORZ \RXWREHFRPHFRPSODFHQW DQG
ignore tool safety principles. A careless action can
FDXVHVHYHUHLQMXU\ZLWKLQDIUDFWLRQRIDVHFRQG
POWER TOOL USE AND CARE
• Do not force the power tool. Use the correct
power tool for your application. The correct power
WRROZLOOGRWKHMREEHWWHUDQGVDIHUDWWKHUDWHIRU
ZKLFKLWZDVGHVLJQHG
8VHWRRORQO\DVGHVFULEHGLQWKLVPDQXDOUse
RQO\PDQXIDFWXUHU¶VUHFRPPHQGHGDWWDFKPHQWV
• Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
UHSDLUHG
• Disconnect the plug from the power source and/
RUUHPRYHWKHEDWWHU\SDFNLIGHWDFKDEOHIURP
WKHSRZHUWRROEHIRUHPDNLQJDQ\DGMXVWPHQWV
changing accessories, or storing power tools.
6XFKSUHYHQWLYHVDIHW\PHDVXUHVUHGXFHWKHULVNRI
VWDUWLQJWKHSRZHUWRRODFFLGHQWDOO\
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
RIXQWUDLQHGXVHUV
• Do not store the power tool on or near to fertilizers
or chemicals.
• Maintain power tools and accessories. Check
IRU PLVDOLJQPHQW RU ELQGLQJ RI PRYLQJ SDUWV
EUHDNDJHRISDUWVDQGDQ\RWKHUFRQGLWLRQWKDW
may affect the power tool’s operation. If damaged,
KDYHWKHSRZHUWRROUHSDLUHGEHIRUHXVHMany
accidents are caused by poorly maintained power
WRROV
• Use the power tool, accessories, etc. in ac-
cordance with these instructions, taking into
account the working conditions and the work
WREHSHUIRUPHGUse of the power tool for opera-
tions different from those intended could result in a
KD]DUGRXVVLWXDWLRQ
• Keep handles and grasping surfaces dry, clean
and free from oil and grease. 6OLSSHU\KDQGOHVDQG
grasping surfaces do not allow for safe handling and
FRQWURORIWKHWRROLQXQH[SHFWHGVLWXDWLRQV
BATTERY TOOL USE AND CARE
5HPRYH WKHEDWWHU\ SDFNIURP WKH SRZHUWRRO
EHIRUHPDNLQJ DQ\DGMXVWPHQWV FKDQJLQJDF-
cessories, storing, or any time the power tool is
not in use. 6XFKSUHYHQWLYHVDIHW\PHDVXUHVUHGXFH
WKHULVNRIVWDUWLQJWKHSRZHUWRRODFFLGHQWDOO\
3
Turn off power tool before removing battery
pack.
Do not handle battery pack, tool, or charger
(including charger plug and terminals) with wet
hands.
%efore using the battery pack or charger read
the operator’s manuals, and any labels on the
battery pack, charger and tool.
Recharge only with
manufacturer. A charger that is suitable for one type
with another battery pack.
Use power tools
battery packs. Use of any other battery packs may
When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal
to another. Shorting the battery terminals together
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
Do not use a battery pack or tool that is dam-
explosion or risk of injury.
Do not expose
excessive temperature. -
perature above 130°C (265°F) may cause explosion.
Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
Charging
range may damage the battery and increase the risk
SERVICE
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorised service providers.
SPECIFIC SAFETY RULES FOR
STRING TRIMMERS
during use. Objects may be thrown or ricochet in
all directions.
%race for unexpected movement when contact
is made with a hard object. Loss of control could
result in serious injury.
Do not use blades, brush cutting wheels,
accessories, or attachment other than those
recommended by Serious injury
or product damage may occur.
Do not operate the tool without the guard in
place. The guard must be attached properly
when trimming. Operating the trimmer without the
guard will cause serious injury.
Do not use tool with a damaged trimmer head.
Cracked or broken pieces can be thrown.
MILWAUKEE .
®
Keep bystanders at least 15m (50') away
contact a MILWAUKEE service facility for a
Do not operate the tool without the front handle
in place. The front handle must be attached
properly for use when trimming. Using one hand
could cause loss of control and result in serious injury.
Carry the trimmer by the front handle. Proper
handling of the trimmer will prevent injury.
Use both hands when operating the trimmer.
Using one hand could cause
loss of control and result in serious injury.
Inspect the area before using the tool. Remove
all debris and hard objects such as rocks, glass,
wire, etc. that can ricochet, be thrown, or otherwise
cause injury or damage during operation.
Keep face, hands and feet clear of rotating line at
all times. Rotating line can cause severe lacerations.
Thrown objects may ricochet off of hard surfaces,
such as walls, trees, and rocks and cause injury.
When possible, do trimming by hand in closed in
areas.
Use care when trimming around decorative plants
and other obsticles. Rotating line will cut/damage
many materials.
Always turn off the tool between cuts or when
transporting from one location to another. Do
starting can cause serious personal injury.
Do not use tool as an edger. Do not tilt tool to
create a right angle to the ground. Keep trimmer
head and line parallel to the ground. Guard cannot
Maintain labels and nameplates. These carry
important information. If unreadable or missing,
replacement.
WARNING
Some dust created by power sanding,
sawing, grinding, drilling, and other
construction activities contains chemicals known to
cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
lead from lead-based paint
crystalline silica from bricks and cement and other
masonry products, and
arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending on
how often you do this type of work. To reduce your
exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such
as those dust masks that are specially designed to
READ AND SAVE ALL
INSTRUCTIONS FOR
FUTURE USE
®
When replacing the line, use only 2mm spiral
or 2.4mm spiral diameter line. Any other size
can degrade performance or cause damage to
the trimmer.
ADDITIONAL BATTERY SAFETY RULES
To reduce the risk of fire, personal
injury, and product damage due to a
WARNING
short circuit, never immerse your tool, battery pack
or charger in fluid or allow a fluid to flow inside
them. Corrosive or conductive fluids, such as
seawater, certain industrial chemicals, and bleach
or bleach containing products, etc., can cause a
short circuit.
Specyfikacje produktu
| Marka: | Milwaukee |
| Kategoria: | Niesklasyfikowane |
| Model: | M18 CLT |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Milwaukee M18 CLT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane Milwaukee
12 Stycznia 2025
8 Stycznia 2025
29 Grudnia 2024
26 Grudnia 2024
12 Grudnia 2024
14 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
Instrukcje Niesklasyfikowane
- Niesklasyfikowane Empress Effects
- Niesklasyfikowane Mr Gardener
- Niesklasyfikowane Cayin
- Niesklasyfikowane Peugeot
- Niesklasyfikowane Mikrotik
- Niesklasyfikowane Binatone
- Niesklasyfikowane Tele Vue
- Niesklasyfikowane Revel
- Niesklasyfikowane Fluke
- Niesklasyfikowane Xterra
- Niesklasyfikowane Digi
- Niesklasyfikowane Aqua Computer
- Niesklasyfikowane Oppo
- Niesklasyfikowane Storcube
- Niesklasyfikowane Amazfit
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025