Instrukcja obsługi Monacor TA-100

Monacor Niesklasyfikowane TA-100

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Monacor TA-100 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 7.5 użytkowników na średnio 4.8 gwiazdek

Pobierz PDF

Strona 1/2

Note:

Whilst every effort has been tomade ensure that the information

contained within this manual is correct,

MONACOR INTERNATIONAL does not accept any liability for errors or omissions.

Specifications and technical data are intended for guidance purposes only and

may vary.

MONACOR INTERNATIONAL GmbH & Co. KG • Zum Falsch 36 • 28307 Bremen • Germany

www.monacor.com .2016 01.15.03

Mounting Clamp

for tube Ø 50

mm • SWL 010

Contact

ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS ELECTRONICS FOR SPECIALISTS

TA-1 00

Or 2.676der No. 10

1. Never exceed the Safe on Working Load (SWL) as shown the clamp.

2. Only use the tube clamp within the designed parameters ( mm)48-51

3. All clamps should be the visually inspected before the use. In event of any damage, clamp should be

taken INTERNATIONAL for out of service MONACOR and returned to an approved service agent an

inspection (see the comprehensive dealer locator for a on our website list of Authorized Service Agents)

4. When used to in conjunction with care be taken other accessories, must ensure the maximum SWL of

any component is not exceeded.

5. MONACOR which INTERNATIONAL does not recommend using clamps do not fully encompass the tube

for overhanging. All open hookclamps clamps including should be used in a vertical orientation only.

Usage Parts & Features

Specyfikacje produktu

Marka:	Monacor
Kategoria:	Niesklasyfikowane
Model:	TA-100
Kolor produktu:	Srebrny
Waga produktu:	561 g
Model:	Szczypce do rur
Materiały:	Odlane aluminium
Rozwarcie zacisku:	50 mm
Siła zaciskania:	100 kg