Instrukcja obsługi Netgear ANT2407


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Netgear ANT2407 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 10 użytkowników na średnio 4.2 gwiazdek

Strona 1/2
)NSTALLATION'UIDE
Extended wireless network coverage: 400~450 M. The actual indoor range will be
affected by the local environment.
Note: For optimal results in extending wireless range with antenna installations, consult a
qualified professional installer service for a site survey and proper installation. For a list of
devices approved by the FCC for use with the antenna, see the NETGEAR website at
http://tools.netgear.com/legal/fcc_antennas.html.
Warning: Keep the antenna 15 cm (6 in) away from
notebook computers and monitors.
400~450 M
To maximize coverage and performance, place the antenna within the line of sight of your
wireless devices. Minimize partitions and objects that block the line of sight if possible.
The antenna can be placed on a flat surface, wall mounted, or magnet mounted.
If wall-mounting, place the antenna on an interior wall above cubicles (cubicles
generally include a metal foil). Ideal placement is 2 meters (6.5 feet) high.
If the wireless access point, router, or gateway, is in an IT room, place the antenna
outside the room against a a wall and close to the ceiling.
The area close to, behind, or beside the antenna will be covered, because the dynamic
range of the WLAN transmitter/receiver and antenna is approximately 100 dB. Even
with 20 dB to 40 dB or attenuation, the signal strength is still strong and
communication is maintained.
The antenna has magnets in the base, which can be used to mount it on metal cabinets,
white boards, or even the ceiling cross bars (the framework that holds the ceiling
panels up).
Omni-directional
antenna ANT2407
Approximate
coverage area
Magnet mounting
on a whiteboard
Turn off your wireless access point, and connect your ANT2407 antenna. Note that the
antenna has a RP SMA female reverse connector. If your wireless access point is new,
follow the access point installation instructions. If you are upgrading an existing access
point, turn it on again.
Wireless Device with 1 Antenna
Wireless Device with 2 Antennas: Replacing the Primary Antenna
Wireless Device with 2 Antennas: Replacing Both
Wireless access point
Wireless access point
Wireless access point


Specyfikacje produktu

Marka: Netgear
Kategoria: Niesklasyfikowane
Model: ANT2407

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Netgear ANT2407, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Netgear

Netgear

Netgear GS504T Instrukcja

25 Stycznia 2025
Netgear

Netgear FV318 Instrukcja

14 Października 2024
Netgear

Netgear GS108Ev4 Instrukcja

9 Października 2024
Netgear

Netgear Orbi RBE972SB Instrukcja

9 Października 2024
Netgear

Netgear Orbi RBK652S Instrukcja

9 Października 2024
Netgear

Netgear Nighthawk MS90 Instrukcja

9 Października 2024
Netgear

Netgear Nighthawk MK93S Instrukcja

9 Października 2024
Netgear

Netgear MS308 Instrukcja

9 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025