Instrukcja obsługi NetworX NX-7002 HomeText
NetworX
Bezpieczeństwo
NX-7002 HomeText
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla NetworX NX-7002 HomeText (8 stron) w kategorii Bezpieczeństwo. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 4 użytkowników na średnio 4.4 gwiazdek
Strona 1/8
EN NX-7002 HomeText user manual
HomeText
HomeText is a new way for you to send SMS messages from your mobile phone to control your security
system.
Sending SMS messages to your security system
1. Create the message.
2. Enter the telephone number given to you by the installer.
3. Send the message
Message format
Messages can consist of a password, commands and [values].
• Your system can be set up to use a password. If so enter a password before the command.
• Commands are instructions you send to the security system. They are shown in bold below.
• [Values] are information you want to send or receive from the system. They are shown italicised
between brackets [ ] below.
• If you need to enter more than one value in a list, they need to be separated by spaces. For example, to
bypass zones 2, 4 and 6, send the command bypass 2 4 6.
• All these elements are not case-sensitive. No national characters are allowed and should not be used -
neither in commands nor in values - for example, you should type espanol instead of Español.
To Do This Send This Explanation Example
Get your system status status Sends the system
status to your phone.
status
Arm your system arm [partition list] Arms the system
remotely. Instead of
the partition numbers
you can use a
keyword ALL for all
partitions.
arm 1 to arm partition 1
arm 1 3 to arm partitions 1 and 3
arm all to arm all partitions
Disarm your system disarm [partition
list]
Disarms the system
remotely.
disarm 1 to disarm partition 1
disarm 1 3 to disarm partitions 1
and 3
disarm all to disarm all partitions
Partarm your system partarm [partition
list]
Partarms the system
remotely.
partarm 1 to arm partition 1
partarm 1 3 to arm partitions 1
and 3
partarm all to arm all partitions
Get the status of the
specified zones
zone status
[partition list]
Sends the status of
the zone (s) to your
phone. Sending a
command without a
partition list returns
information for all
partitions.
zone status 1 to receive the
message with zone status from
zones assigned to partition 1
zone status all to receive the
message with zone status for all
zones
Get a list of zones with
problems
zone faults
[partition list]
Sends a list of zones
with problems to
your phone. Sending
a command without
a partition list returns
information for all
partitions.
zone faults 1 to receive fault
information from zones assigned
to partition 1
zone faults all to receive the
message with zone faults for all
zones
Bypass zones bypass [zone list] Bypasses the
specified zones.
bypass 1 3 to bypass zones 1 and
3
Read events from the
event log
events [number]
events [range]
Sends the specified
event or events from
the event log to the
phone.
events 1 to read the last (newest)
event from the panel log
events 1 3 to read the last 3
events from the panel log
events returns the 10 most recent
events
Set a connection to a
home automation
device
output
[output_number
X10_house_code
X10_unit]
Connects a specified
home automation
device.
output 2 A 1 to set output two to
control X-10 device with house
code A and unit number 1
Switch on X-10 outputs on [output list] Switches on an X-10
output.
on 1 4 7 to switch on X-10 outputs
1, 4 and 7
on all to switch on all X-10 outputs
To Do This Send This Explanation Example
Switch off X-10 outputs off [output list] Switches off an X-10
output.
off 1 4 7 to switch off X-10 outputs
1, 4 and 7
off all to switch off all X-10 outputs
Activate an auxiliary
function
switch aux [output
list]
Changes the auxiliary
function that occurs
when it is activated,
for example by a
button on a keyfob.
switch aux 1 to activate aux
output 1 on the panel
Change your user code user code [new
user code]
Changes your user
code.
user code 0101 to change your
own user code to 0101
Change another user
code
user code [user
number new user
code]
Changes another
persons’ user code.
user code 2 0101 to change the
user code to 0101 for the user 2
Delete a user code delete user code
[user number]
Deletes a user code. delete user code 2 to delete the
user code for the user 2
Start reporting start reporting Sends reports from
the NX7002.
start reporting
Stop reporting until
system re-arm
stop reporting Stops reports being
sent form the
NX7002 until the
system is rearmed.
stop reporting
Stop reporting until you
start it again
stop reporting
permanent
Stops reports being
sent from the
NX7002 until the start
reporting command
is sent.
stop reporting permanent
Register your phone register [phone
number user
number]
The phone is
registered with your
alarm system.
register 32444123456 2 to
register the number 32444123456
to user 2
Register your phone
with a new password
register [phone
number user
number Password]
The phone is
registered with your
alarm system with a
new password.
register 32444123456 1 444444
to register the number
32444123456 to user 1 with a
password 444444
To change language language
[language]
The language the
SMS texts use is
changed. The
available arguments
(languages) are:
English, Dutch,
Espanol, Suomi,
Italiano, Polska,
Portugues, Svenska,
Francais, Dansk,
Deutsch and Norsk.
Note: No national
characters are to be
used in typed
arguments.
language deutsch to change the
interface to German
To get a list of SMS
commands
help Sends a list of valid
SMS commands to
your phone.
help
To get a users details user details [user
number]
Sends the users
details to your phone.
user details 2 to receive a
message with information about
user 2
To get the current
configuration of
outputs
list outputs Sends a list of how
the outputs are
currently
programmed to your
phone.
list outputs
To get a list of users
list users
Sends a list of all
currently registered
users and their phone
numbers.
list users
To disable access from
the specified phone
disable phone
[phone number]
Disables the SMS
system control from
the particular phone.
disable phone 32444123456 to
disable HomeText control from this
phone number
To enable access from
the specified phone
enable phone
[phone number]
Enables a previously
disabled SMS system
control from the
particular phone.
enable phone 32444123456 to
enable HomeText control from this
phone number
To Do This Send This Explanation Example
To change your
password
password [new
password]
Changes your
password.
password 444444 to change a
password assigned to your phone
to 444444
To change another
persons SMS password
password phone
[phone number
new password]
Changes another
person’s password.
password phone 32444123456
444444 to change a password
assigned to the number
32444123456 to 444444
Receiving SMS messages from your security system
HomeText can be set up to send two types of text messages to your mobile phone.
• Confirmation messages are sent after you send a message. They let you know the message has been
received and the command has been carried out.
• Report messages are sent after events. These are similar to the reports in the event log viewed on the
keypad.
Message Meaning
Alarm partition list There is an alarm in the partitions listed.
Armed partition list The partitions listed have been armed.
Partarmed partition list The partitions listed have been part armed.
Disarmed partition list The partitions listed have been disarmed.
Not ready partition list The partitions listed cannot be armed.
Partition n Open zone list The zones listed in this partition are open.
Partition n Bypassed zone list The zones listed in this partition are bypassed.
Copyright © 27/5/08, GE Security B.V. 106xxxx
Specyfikacje produktu
| Marka: | NetworX |
| Kategoria: | Bezpieczeństwo |
| Model: | NX-7002 HomeText |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z NetworX NX-7002 HomeText, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Bezpieczeństwo NetworX
5 Października 2024
23 Września 2024
21 Września 2024
20 Września 2024
20 Września 2024
9 Września 2024
7 Września 2024
7 Września 2024
6 Września 2024
5 Września 2024
Instrukcje Bezpieczeństwo
- Jablotron
- HomeWizard
- Fysic
- Unitec
- Storex
- Velbus
- One Concept
- Mikros
- Geemarc
- Profile
- QuattSecure
- Dnt
- Bitron Video
- Inner Range
- Dericam
Najnowsze instrukcje dla Bezpieczeństwo
19 Lutego 2025
15 Stycznia 2025
15 Stycznia 2025
15 Stycznia 2025
11 Stycznia 2025
11 Stycznia 2025
2 Października 2024
28 Września 2024
28 Września 2024
28 Września 2024