Instrukcja obsługi Neumann LH 48

Neumann obsługa głośników LH 48

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Neumann LH 48 (2 stron) w kategorii obsługa głośników. Ta instrukcja była pomocna dla 58 osób i została oceniona przez 29.5 użytkowników na średnio 4.8 gwiazdek

Pobierz PDF

Strona 1/2

Important safety and mounting instructions

• Have the product mounted by a specialist.

• Due to his/her technical training, know-how and experience as well

as knowledge of relevant provisions, regulations and standards, the

specialist must be able to assess assigned tasks, recognize poten-

tial hazards and ensure appropriate safety measures. The following

safety and mounting instructions are addressed to this specialist.

•

Read and follow the safety and mounting instructions, keep these

instructions and always include them when passing the 48 on LH

to third parties.

•

Also read and follow the installation instructions contained in the

operating manual of the mounted loudspeaker.

• -When mounting, observe and follow the local, national and interna

tional regulations and standards.

•

Do not install the LH48 in locations where it is exposed to externally

generated vibrations.

• Always use the original Neumann supplied parts.

•

Mount the 48 in combination with other accessories from the LH

Neumann mounting hardware range to loudspeakers with a maxi-

mum weight of 65 kg (143.3 lbs).

Download the PDF file Hardware Mounting Matrix from “ ”

www.neumann.com. Only combine the Neumann mounting

hardware as specified in the Hardware Mounting Matrix . “ ”

CAUTION!

Danger of injury and material damage

due to dropping of the loudspeaker/mounting hardware!

Unless the 48 is properly fastened, the loudspeaker together LH

with the mounting hardware can drop down.

XHave the loudspeaker held by a second specialist who is physi-

cally able to do so. The requirements mentioned earlier also

apply to this specialist.

XWhen mounting the loudspeaker, provide a sufficien additional

protection against dropping.

If you use other M8 bolts than the supplied ones to fasten the LH48

to other Neumann mounting hardware and/or K&M monitor stands,

the loudspeaker together with the mounting hardware can drop

down.

XAlways use the supplied bolts to fasten the LH 48.

• Fasten the LH 48 to the K&M monitor stand. Use the two bolts C and

fasten them with a torque of 10 Nm (see fi . 1) .

•

Attach the mounting hardware to the LH 48 (see the “Hardware

Mounting Matrix”). Use the two bolts and fasten them with a

torque of 20 Nm (see fi . 2). Also read and follow the safety and

mounting instructions contained in the operating manual of the

selected mounting hardware.

•

If different mounting positions are possible, choose mounting points

that minimize leverage when the loudspeaker is tilted. As a rule,

this means that the other Neumann mounting hardware is centrally

mounted to the LH48.

•

Attach your loudspeaker to the Neumann mounting hardware. Follow

the safety and mounting instructions of the loudspeaker and the

mounting hardware.

•

Use safety wires to additionally protect the loudspeaker and the

mounting hardware against tipping/dropping. The safety wires, rope

terminations and coupling links must comply in their dimensioning

and condition with the regulations and standards of the country in

which they are used and must reliably prevent tipping/droppin of

a loudspeaker and the attached mounting hardware.

• Make sure that ...

–

the LH48, the K&M monitor stand, the associated mounting hard-

ware and the loudspeaker cannot tip over or drop down, even if

the power or audio cables are pulled;

–

you replace the safety wires and coupling links by new ones when

they have prevented tipping/dropping;

–

you check every 3 months if all screws are properly tightened

and if the 48, the K&M monitor stand and associated LH mount-

ing hardware, additional fastening elements, safety wires and

coupling links, as well as the loudspeaker are in proper condition.

In case of any damage or any deviation from the safety and mounting

instructions, immediately dismount the loudspeaker, the 48 and LH

the additional mounting hardware used.

Delivery includes

A: 1 x LH48 stand adaptor plate

B: 2 x M6x16 bolts with countersunk Allen key head

C: 2 x M8x20 bolts with countersunk Allen key head

D: 2 x metal washers

E: 2 x M8 nuts

F: 2 x cover caps, PVC

G: 1 x 4 mm Allen key

H: 1 x 5 mm Allen key

Specification

Weight 0.260 kg (0.6 lbs)

Dimensions 4 x 60 x 146 mm (H x W x D)

5/32" x 2 3/8" x 5 3/4" (H x W x D)

Max. load 65.0 kg (143.3 lbs)

Guarantee

For the current terms and conditions of the product guarantee please

visit www.neumann.com.

GEORG NEUMANN GMBH · LEIPZIGER STR. 112 · 10117 BERLIN · GERMANY 10/15 · 549114/A02

TEL +49 (0)30 / 41 77 24-0 · FAX -50 · HEADOFFICE@NEUMANN.COM · WWW.NEUMANN.COM

LH 48 Mounting manual

Mounting flan e adaptorg

Specyfikacje produktu

Marka:	Neumann
Kategoria:	obsługa głośników
Model:	LH 48
Kolor produktu:	Czarny
Szerokość produktu:	60 mm
Głębokość produktu:	146 mm
Waga produktu:	260 g
Ilość na paczkę:	1 szt.
Umieszczenie:	Sufit
Maksymalna waga:	65 kg
Kompatybilność:	Neumann 26790, 26795
Wysokość (max.):	4 mm