Instrukcja obsługi Neumann LH 61
Neumann
obsługa głośników
LH 61
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Neumann LH 61 (3 stron) w kategorii obsługa głośników. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 4.6 gwiazdek
Strona 1/3
LH 61
Mounting manual
Important safety and mounting
instructions
• Read and follow the safety and mounting instructions, keep these
instructions easily accessible and always include them when pas-
sing the LH 61 on to third parties.
• Also read and follow the installation instructions contained in the
operating manual of the studio monitor to be mounted.
• When mounting, follow the local, national and international regu-
lations and standards.
Intended use
The LH 61 is a holder for mounting a studio monitor on a ceiling or a
stand and providing optimal orientation. The LH 61 is only suitable
for 2-way studio monitors and must only be used indoors in clean, dry
rooms such as studios.
To properly mount the LH61 together with a studio monitor, you need
additional Neumann accessories (see the “Mounting Hardware Mat-
rix” at www.neumann.com) and additional fastening elements for
mounting on a ceiling, which are not included with delivery.
The LH 61 must not be used for other purposes or in other environ-
ments. In case of any damage or any deviation from the safety and
mounting instructions, immediately dismount the studio monitor and
the LH61.
Required qualifications
Only skilled personnel may attach the LH61 to the studio monitor
and mount it on a ceiling or stand. Due to his/her technical training,
know-how and experience as well as knowledge of relevant provisi-
ons, regulations and standards, the specialist must be able to assess
assigned tasks, recognize potential hazards and ensure appropriate
safety measures.
Safety instructions for mounting
• Mount only one LH 61 to one studio monitor, as described in these
assembly instructions.
• If the studio monitor is heavy, find a second person to help carry
out the work; during the work, place the studio monitor on a flat,
stable surface that can support its weight.
• Place something soft underneath the studio monitor so that you do
not scratch its surface while performing the work.
• Always use the enclosed original accessories.
• The ceiling or stand must be able to support the weight of the stu-
dio monitor and all accessories used, such that no parts will fall
even if someone pulls hard on the power or audio cables. When cal-
culating the weight, also take into account the additional leverage.
• When mounting the LH61 on a ceiling, use fastening elements (not
included with delivery) that are suciently dimensioned to ensure
that the entire weight is held securely.
• Mount the LH61 and the attached studio monitor on a flat, non-slip
surface or on a suitable stand.
• Attach the angle piece to the ceiling or stand. If necessary, use
additional Neumann accessories (e.g. LH29 or LH43 in combina-
tion with LH47).
• Then attach the mounting bracket and the brace for the vertical inc-
lination adjustment to the angle piece and hook the studio monitor
into the LH61. Then adjust the studio monitor to the desired inc-
lination.
• Tighten all screws by hand. Once you have finished mounting and
aligning the studio monitor, ensure that all screws are firmly tigh-
tened.
• Take additional measures to ensure that the LH61 and the attached
studio monitor cannot fall. Use safety wires that are suciently
dimensioned for the weight to be secured.
• Every 3 months, check that all screws are properly tightened and
that the LH 61, the studio monitor and the ceiling or stand to which
the LH 61 is fastened are in the proper condition.
• Replace the safety wire once it has already prevented the studio
monitor from falling once.
Delivery includes
A: 1 x mounting bracket
B: 1 x brace for vertical inclination adjustment
C: 1 x angle piece
D: 2 x metal washers, M6
E: 2 x Allen screws, M8x12
F: 6 x Allen screws, M6x12
G: 1 x Allen key, 5mm
H: 1 x Allen key, 4mm
Specifications
Weight 1.2kg
Dimensions when assembled approx. 193x78x284mm (H x W x D)
Max. load 10kg
Warranty
For the current terms and conditions of the warranty, please visit
www.neumann.com.
· . · · / · /
() / - · - · @. · ..
EN
Specyfikacje produktu
| Marka: | Neumann |
| Kategoria: | obsługa głośników |
| Model: | LH 61 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Neumann LH 61, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje obsługa głośników Neumann
5 Października 2024
5 Października 2024
5 Października 2024
5 Października 2024
4 Października 2024
7 Maja 2024
Instrukcje obsługa głośników
- Newstar
- Roadworx
- Sonos
- My Wall
- Audizio
- Teufel
- Cambridge
- Bogen
- Kanto
- Vimar
- Velleman
- Electro-Voice
- Valcom
- Kramer
- Bowers Wilkins
Najnowsze instrukcje dla obsługa głośników
14 Stycznia 2025
14 Stycznia 2025
31 Grudnia 2025
31 Grudnia 2025
30 Grudnia 2025
30 Grudnia 2025
30 Grudnia 2025
30 Grudnia 2025
28 Grudnia 2024
26 Grudnia 2024