Instrukcja obsługi Nexxt Nebula300Plus
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Nexxt Nebula300Plus (2 stron) w kategorii router. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 7 użytkowników na średnio 4.5 gwiazdek
Strona 1/2
WAN 3 2 1 PWR WPS/RST
B.Ethernet Access
Modem
Internet
Internet Ethernet Cable
A.Telephone Line/FTTH
(Fiber To The Home)/
Cable Acces
O
The defaul name is
Nexxt XXXXXX
The is no defaul WIFI password.
*Images herein are for references only. The actual product may differ.
Ethernet Cable WAN
Quick installation guide
1 2 3
1
Preliminary steps
Router configuration
Product layout
This advanced network device works as a router,
wireless AP, and universal repeater. Before setting
up the router, you must verify that you have
high-speed internet access available. The most
widely used connection nowadays is broadband
DSL or cable. The description used in this guide is
based on that type of connection.
1. Antennas: Three high-gain 5dBi omnidirectional
antennas.
2. WAN port: This RJ45 port is where you will connect the
DSL/cable modem, or ethernet line.
3. LAN ports (1/2/3): Connect 10/100Mbps ethernet
devices such as computers, switches, and hubs to any of
these RJ45 ports.
4. Power: Connect the supplied power adapter to this jack.
5.WPS/Reset:
1. Power off your PC, cable/DSL modem and the router.
2. Find the optimum location for the router. The best place is
usually at the center or your wireless network with the
antennas in the upright position.
3. Connect one end of the supplied power adapter to the AC
input jack located on the rear panel of the router, before
plugging the other end to a standard electrical wall outlet.
4. Connect your network devices to the LAN ports of the router.
Then using an ethernet cable, connect your modem to the
WAN port in order to gain internet access.
5. Finally, power on the router, your PC and modem.
Thank you for purchasing the new Nebula 300+
wireless-N router from Nexxt Solutions™. If any of
the following items are mismatched, missing or
damaged, please contact the merchant from
whom you purchased the unit for immediate
replacement.
• Wireless-N router
• 100/240V power adapter
• Network cable
• Quick installation guide
4 5 6
7 8
10 11 12
9
1.Log into the router by accessing the web base
utility. To do so, in the browser’s address field enter
the default address or http://192.168.0.1
nexxtwifi.com.
Note: To access the router wirelessly, look for the
SSID, (whereby represents the Nexxt_XXXXXX X
last 6 numbers of the MAC address).
2. In this stage, the wireless router web interface will
come up. The system will then prompt you to enter the
default password. Type and click to admin Login
continue.
3. Next, the Basic settings page will be displayed. In this
window, you will be prompted to select the Internet
Connection Type, which will depend on the type of
connection offered by your existing Internet Service
Provider (ISP): PPPoE, for dial-up or DHCP for other
broadband connections. You can also set it up to use
a Static IP configuration. By default, the router will
auto-detect the connection type and set it to the
corresponding configuration. You can also setup the
wireless password and SSID under the Wireless
Settings blank area (by default, this is ). For security
purposes, we recommend using a security key at this
stage. It must contain at least 8 characters. Click
to complete the initial set up of the router. OK
Front panel
Back panel
The rear panel
provides the physical
connectors for power
and the client network
devices.
2 3 4 5
Hardware installation
N
1
・Press this button for about one second to enable WPS
encryption. Within two seconds, enable the WPS feature
on the client device to establish a connection.
・Press this button for about eight seconds to restore the
device to its factory default settings. All LED indicators will
light up.
LED indicators on the front panel provide information
about network activity, the connection and link status of
the ports in real time. They also facilitate activity monito-
ring and troubleshooting the performance of the device.
LED
indicator
Blinking The system is working properly
No link is detected on that port
Off
Blinking
Off
Solid
Solid
Blinking
Off
No power is being supplied to the router or
the device is malfunctioning
The Wi-Fi radio is enabled
The Wi-Fi radio is disabled
The link between the router and a device
is established through that port
The device is actively sending or
transmitting data over that port
The device is actively sending or
transmitting data using wireless link
Status Description
SYS
WiFi
LAN 1 3~
LED
indicator
Solid
Blinking
The link between the router and a device
is established through that port
Off No ethernet cable is connected to that
port
The device is actively sending or
transmitting packets over that port
There is no function or indication
associated with this LED
Status Description
WAN
NN
Specyfikacje produktu
| Marka: | Nexxt |
| Kategoria: | router |
| Model: | Nebula300Plus |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Nexxt Nebula300Plus, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje router Nexxt
11 Września 2024
3 Września 2024
2 Września 2024
26 Sierpnia 2024
26 Sierpnia 2024
16 Sierpnia 2024
6 Sierpnia 2024
Instrukcje router
- F-Secure
- Roland
- Keewifi
- Cambium Networks
- Bosch
- Teltonika
- AVMATRIX
- Acer
- Schneider
- DeWalt
- Sigma
- Belkin
- Media-Tech
- TCL
Najnowsze instrukcje dla router
9 Kwietnia 2025
9 Kwietnia 2025
8 Kwietnia 2025
3 Kwietnia 2025
2 Kwietnia 2025
1 Kwietnia 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025
30 Marca 2025