Instrukcja obsługi Olympia TK 20
Olympia
Kamera monitorująca
TK 20
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Olympia TK 20 (1 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 20 osób i została oceniona przez 10.5 użytkowników na średnio 4.7 gwiazdek
Strona 1/1
Intended Use
The door chain increases property security when residents are inside the respective building or room.
The door chain is intended for apartment and house entrance doors made of wood, steel, aluminium and
composite materials. In the case of plastic and compound materials, a metallic prole must be available at
the assembly positions or a metallic plate underlaid on the other side.
Any other use is considered unintended use. Unauthorised modications or reconstructions not de-
scribed in the manual are not permitted and could cause the product to be damaged.
Safety Instructions
WARNING! Risk of suocation! Children can swallow small parts, packaging
and protective foils. Keep the product and packaging out of reach of chil-
dren!
IMPORTANT! Improper assembly can lead to property damage. Install the door chain
as described in this assembly manual. Only use the assembly material supplied.
IMPORTANT! DO NOT use spray oils or anything similar. Clean the door chain occa-
sionally with a dry cloth. The mechanism inside is already greased at the factory.
During assembly, pay attention that no wood chippings or similar bits get into the
lock or cylinder housing.
Installation
1 Disassemble the lock unit of the door chain holder, which consists of the assembly base (1), lock housing
(2), cylinder housing (3) and housing cover (4), by removing the screw (5).
2 Choose the assembly position for the lock unit. Hold the assembly base (1) at the required position
to mark the two drill holes. Then drill the two holes using a 6mm drill, insert the dowels (10) and x
the assembly base (1) with two screws (9).
3 Fit the lock housing (2) on the base (1) to mark the two drill holes. Drill the holes, insert the dowels
(10) and x the lock housing (2) in place with 2 screws (9).
4 Insert the cylinder housing (3) and t the housing cover (4). Screw the lock housing and housing
cover together using the screw (5).
5 Insert the holding pin (8) in the lock housing so that the head of the pin points towards the door. Move
the holding pin (8) to its locking position and x in place with the grub screw (6).
6 Engage the door chain in the lock housing by means of the locking bolt (7).
7 Lay the door chain retaining ring over the holding pin (8).
Assembly Manual
Door Chain TK15 / TK20
4
3
9
6
8
2
5
7
10
1
General View
1Assembly base
2Lock housing
3Cylinder housing
4Housing cover
5Screw M3x75 mm
6Grub screw
7Door chain with locking bolt
8Holding pin
9Screws 5x35 mm
10 Dowel
Guarantee
The period of guarantee is 24 months. The period
of guarantee begins on the date of purchase.
It is essential to keep the purchase receipt and
original packaging. If a problem occurs, please
visit our Return Merchandise Authorization (RMA)
in the Support section of our web site at
www.olympia-vertrieb.de
In the case of further queries, please contact our
hotline 01805007514 (costs via German landline
at time of going to print: 14 ct/min., max. 42 ct/
min. via a mobile network).
Olympia Business Systems Vertriebs GmbH
Zum Kraftwerk 1 - 45527 Hattingen
Disposal
Help protect the environment and
dispose of the product and packaging
materials according to the applicable
local regulations.
Further Information
Further information on this product is available at
http://productip.com/?f=84fc1 /
http://productip.com/?f=841
Or scan this QR code.
Tools Required
■Cross-tip screwdriver
■6 mm drill bit
■Marker, scriber
Scope of Delivery
Check the package supplied is
complete:
■Door chain
■Assembly material
Subject to change without prior notice. v1.0, 10.2018 Art. No. 7054 / 7055
Read the assembly manual thoroughly and
observe the information contained during
installation. Keep the assembly manual in a
safe place for future reference.
Observe the assembly
dimensions specied.
Specyfikacje produktu
| Marka: | Olympia |
| Kategoria: | Kamera monitorująca |
| Model: | TK 20 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Olympia TK 20, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Kamera monitorująca Olympia
11 Stycznia 2025
11 Stycznia 2025
29 Września 2024
19 Września 2024
16 Września 2024
16 Września 2024
15 Września 2024
15 Września 2024
14 Września 2024
14 Września 2024
Instrukcje Kamera monitorująca
- Avanti
- Uniden
- Trebs
- Lorex
- Smartwares
- Elmo
- Toshiba
- Axis
- Luis Energy
- BZBGear
- Seneca
- Yale
- Epcom
- Pioneer
- I-PRO
Najnowsze instrukcje dla Kamera monitorująca
28 Stycznia 2025
25 Stycznia 2025
17 Stycznia 2025
17 Stycznia 2025
15 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025
12 Stycznia 2025
12 Stycznia 2025