Instrukcja obsługi Ozito ASG-PRO


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito ASG-PRO (8 stron) w kategorii pistolet do malowania. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 7 użytkowników na średnio 4.1 gwiazdek

Strona 1/8
TOUCH-UP
SPRAY GUN
160-240ml/min
INSTRUCTION MANUAL
SPECIFICATIONS
Max Air Pressure: 50psi (3.4Bar)
Av. Air Consumption: 56-170l/min (2-6cfm)
Nozzle Size: ø1.5mm
Spray Width: 40-70mm
Flow Rate: 160-240ml/min
Feed Type: Suction
Paint Pot Size: 200ml
Air Inlet: 1/4” BSP
Weight (tool only): 0.4kg
WHAT’S IN THE BOX
Spray Gun
Paint Pot
ozito.com.au
ASG-PRO
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 2 3 4 5 6 7 8
1 Wrap the threaded male air
inlet of the spray gun with
teon tape in a clockwise
direction.
3 Pull back the sleeve on
hose tting, insert male
end & release sleeve on
hose tting.
2 Screw the female tting
clockwise onto the male
end of the air inlet.
Attaching The Air
The paint pot has a vent hole
to allow air to escape which
enables uid to ow into the
spray gun.
Ensure it is clean and not
blocked at all times.
3 Once the correct viscosity
is obtained, pour the
mixture into the paint pot.
Paint Pot Vent Hole
IMPORTANT! THE SPRAY GUN CANNOT BE USED WITH
MATERIALS CONTAINING ABRASIVE SUBSTANCES, GLAZES,
CAUSTIC AND ALKALINE SUBSTANCES.
1 Fully tighten the spray
regulator dial.
The spray regulator dial is a stop that limits the distance the
trigger can be pressed and can therefore limit the amount of
paint being sprayed.
2 Slightly loosen the spray
regulator dial, then test
setting on a scrap piece of
material.
Spray Regulator Dial
PAINT
THINNERS
3 Repeat step 2 until desired uid output is reached.


Specyfikacje produktu

Marka: Ozito
Kategoria: pistolet do malowania
Model: ASG-PRO

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito ASG-PRO, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą