Instrukcja obsługi Ozito ASG-SFE


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ozito ASG-SFE (8 stron) w kategorii pistolet do malowania. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 8.5 użytkowników na średnio 4.7 gwiazdek

Strona 1/8
SUCTION FEED
SPRAY GUN
130-210 ml/min
INSTRUCTION MANUAL
SPECIFICATIONS
Working Air Pressure: 50psi (3.5Bar)
Max Air Pressure: 87psi (6Bar)
Air Consumption: 85-198l/min (3-7cfm)
Nozzle Size: ø1.5mm
Spray Width: 40-70mm
Flow Rate: 130-210ml/min
Feed Type: Suction
Paint Pot Size: 1000ml
Air Inlet: 1/4” BSP
Weight (tool only): 0.75kg
WHAT’S IN THE BOX
Spray Gun
ozito.com.au
ASG-SFE
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
5678
1 Wrap the threaded male air
inlet of the spray gun with
teon tape in a clockwise
direction.
3 Pull back the sleeve on
hose tting, insert male
end & release sleeve on
hose tting.
2 Screw the female tting
clockwise onto the male
end of the air inlet.
Attaching to Compressor
3 Once the correct viscosity
is obtained, pour the
mixture into the paint pot.
IMPORTANT! THE SPRAY GUN CANNOT BE USED WITH
MATERIALS CONTAINING ABRASIVE SUBSTANCES, GLAZES,
CAUSTIC AND ALKALINE SUBSTANCES.
1 Fully tighten the uid
adjustment dial.
2 Slightly loosen the uid
adjustment dial, then test
setting on a scrap piece of
material.
Fluid Adjustment Dial
PAINT
THINNERS
3 Repeat step 2 until desired uid output is reached.
The uid adjustment dial is a stop that limits the distance the
trigger can be pressed, thereby limiting the amount of paint
being sprayed.


Specyfikacje produktu

Marka: Ozito
Kategoria: pistolet do malowania
Model: ASG-SFE

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ozito ASG-SFE, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą