Instrukcja obsługi Panasonic VL-VN1900

Panasonic dzwonek do drzwi VL-VN1900

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Panasonic VL-VN1900 (44 stron) w kategorii dzwonek do drzwi. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 9 użytkowników na średnio 3.8 gwiazdek

Pobierz PDF

Strona 1/44

Installation and Operating Instructions

Video Intercom System — Lobby Station

Model No. VL-VN1900

Thank you for purchasing a Panasonic product.

Please follow all instructions in this document and save it for future reference.

Carefully read the information found in the section titled "2.1 Important safety information" in particular.

This system is not designed to provide complete protection from property loss. To the maximum extent

permitted by applicable law, Panasonic will not be held responsible for any damage incurred as a result of

property loss.

Note to the installer

R This document includes instructions for both installation and operation. See the section titled

"4 Installation" for installation instructions.

R Please read this document carefully, and install the product safely and correctly by following the

instructions.

R Only use attachments/accessories specified by the manufacturer.

R The installation shall be carried out in accordance with all applicable installation rules.

1. Introduction

1.1 System overview ...........................................3

1.2 Included items ...............................................9

1.3 Optional items ...............................................9

1.4 About this document ...................................10

2. Important Information

2.1 Important safety information ........................11

2.2 Important safety instructions .......................12

2.3 Privacy and rights of portrait .......................12

2.4 Data security ...............................................12

2.5 Disclaimer ...................................................12

2.6 Other important information ........................13

2.7 General information .....................................13

2.8 For India only ..............................................14

2.9 For Europe ..................................................14

3. Preparation

3.1 Device diagrams .........................................15

4. Installation

4.1 Installation cautions .....................................16

4.2 Installing the power supply unit ...................16

4.3 Installing the lobby station ...........................18

4.4 Wiring schematic .........................................24

4.5 Wire and cable specifications ......................25

4.6 Connecting other devices ............................26

5. Programming

5.1 Programming overview ...............................27

5.2 PC programming .........................................27

5.3 Lobby station management .........................30

6. Basic operations

6.1 Lobby station operations .............................33

6.2 Facility staff operations using a SIP

phone ..........................................................33

6.3 Information for visitors .................................34

7. Other information

7.1 Basic troubleshooting ..................................35

7.2 Error messages ...........................................35

7.3 Specifications ..............................................36

7.4 Cleaning ......................................................37

7.5 Open source software notice ......................37

7.6 Identifying enhanced features .....................38

Table of Contents

1.1 System overview

This document explains basic information required to

install and configure a VL-VN1900 Lobby Station for use

with a Video Intercom System that is comprised of the

following devices.

R VL-MN1000 Room Monitor

R VL-VN1900 Lobby Station

R VL-VN1500 Door Station

R VL-VN1700 Control Box

R VL-VN1800 Control Box*1

General information about connecting other devices to

the system is also provided.

*1 The available products differ depending on your

region. For more information, please consult your

dealer.

1.1.1 Main features

IP technology for smoother installation and

integration

R Voice and data is carried over one cable, simplifying

installation and connections.

R Network cameras and SIP phones can be integrated

into the system.

Large-capacity, expandable

R The system can support up to 2000 SIP devices

when using a control box, and up to 200 SIP devices

when not.

R When 5 VL-VN1800 control boxes*1, *3 are used, up

to 10000 SIP devices can be supported.

R Optional devices such as access controllers (key

switches, card readers, etc.), open door sensors, and

electric locks can be connected to each lobby station.

R Supports multi-building installations and buildings

with up to 99 floors.

Easy to configure and maintain

R System settings can be configured in advance using

a computer, and uploaded on-site over the network.

R Detailed settings and logs can be accessed using a

web browser.

Convenient features for residents, visitors, and

facility staff

R The system can be used in "room mode" (visitors can

call rooms directly) or "reception mode" (visitor calls

are directed to a receptionist).

R Visitors can use a lobby station to call residents and

leave video messages for residents who do not

answer.

R Residents can use their room monitors to monitor

lobby stations and optional network cameras, and

can allow visitors to enter the lobby and lift.

*1, *2

R External devices connected to residents’ room

monitors can notify facility staff and/or residents

when triggered.

R Facility staff can make and receive calls to and from

residents and visitors.

R Facility staff can send messages (text or voice,

depending on system configuration) to residents’

room monitors for quick information dispersal.

R For systems composed of VL-VN1800 control

boxes*1, *3, the following main operations can be

performed by installing the Video Intercom System

app on a smartphone.

– Answering calls from visitors (from the lobby

station or door station)

– When using arm mode (at home/out), alarm

notifications can be received when external

devices (sensors, urgency buttons, or emergency

buttons) connected to the room monitor are

triggered

*1 The available products differ depending on your

region. For more information, please consult your

dealer.

*2 For enhanced system version 2 (page 38)

*3 For enhanced system version 3 (page 38)

1. . Introduction

1. Introduction

Specyfikacje produktu

Marka:	Panasonic
Kategoria:	dzwonek do drzwi
Model:	VL-VN1900
Kolor produktu:	Biały
Typ kontroli:	Buttons,Rotary
Wbudowany wyświetlacz:	Tak
Położenie urządzenia:	Wolnostojący
Częstotliwość wejściowa AC:	50 Hz
Napięcie wejściowe AC:	230 V
Wysokość produktu:	840 mm
Szerokość produktu:	600 mm
Głębokość produktu:	590 mm
Waga produktu:	65000 g
Szerokość opakowania:	650 mm
Wysokość opakowania:	880 mm
Głębokość opakowania:	600 mm
Kolor drzwiczek:	Biały
Ilość programów piorących:	15
Poziom hałasu:	72 dB
Opóźniony start czasomierza:	Tak
Opóźniony start:	19 h
Pół wsadu:	Tak
Klasa emisji hałasu:	A
Prąd:	10 A
Obciążenie:	2200 W
Pobór wody na cykl:	41 l
Tryb wyłączenia:	0.5 W
Klasa wydajności energetycznej:	C
Skala efektywności energetycznej:	Od A do G
Zużycie energii na 100 cykli:	62 kWh
Regulowane nóżki:	Tak
Wskaźnik pozostałego czasu:	Tak
Zabezpieczenie przed dziećmi:	Tak
Pranie zużywające energię:	0.623 kWh
Typ ładowania:	Od przodu
Zawias drzwiczek:	Lewy
Pojemność znamionowa:	8 kg
Maksymalna prędkość obrotu:	1400 RPM
Klasa wirowania (suszenia):	B
Poziom hałasu (pranie):	- dB
Pozostała wilgoć:	53 %
Poziom hałasu (wirowanie):	72 dB
Programy prania:	Cotton,Eco,Synthetics,Quick,Quick 14min,Mix,Hand/wool,Delicate/silk,Spin/drain,Rinse,Down wear/duvet,Sport,Jeans/denim,Blouse/shirt,Hygiene/anti-allergy
Kod zharmonizowanego systemu (HS):	84501190
Czas cyklu (max):	218 min
Regulowana prędkość obrotów:	Tak
Regulacja temperatury:	Tak
Pobór mocy w trybie czuwania:	1 W
Waga wraz z opakowaniem:	66000 g
Samoczyszczący:	Tak
System równoważenia balansu:	Tak
Okienko:	Tak
Liczba programów:	15
Funkcja Anti-Crease:	Tak
Regulowanie stopy:	15 mm
Czas cyklu (program szybki):	28 min
Minimalne ciśnienie przepływu wody:	100 kPa
Maksymalne ciśnienie przepływu wody:	1000 kPa
funkcja Rinse Plus:	Tak
Czyszczenie bębna:	Tak
Wstrzymanie płukania:	Tak
Opcja usuwania plam:	Tak
Funkcja Fast+:	Tak
Pojemnik na płynny środek czyszczący:	Nie