Instrukcja obsługi Panduit DIFBA2002S00S

Panduit Niesklasyfikowane DIFBA2002S00S

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Panduit DIFBA2002S00S (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 10 użytkowników na średnio 4.6 gwiazdek

Strona 1/4
FOR TECHNICAL SUPPORT www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS
© Panduit Corp. 2014 V00029ER
Page 1 of 4
DIFBA2002S00S
(installed in Net-Access
S-Type Server Cabinet)
Switch Inlet Duct
DIFBA2002S00S
Cisco Nexus 9396PX Switch
(reference)
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS V00029ER
Page 2 of 4
Intended
Mounting
Location
(2 rack spaces)
Prepare Switch for Ducting Installation
-Remove bottom screws from front of switch rails and discard.
FRONT OF
CABINET
Install Cage Nuts
-Insert [2] Bonding cage nuts per equipment rail in rack space immediately above switch rails, at front of cabinet
FRONT OF
CABINET
[2] Bonding Cage Nuts
(install in Rack Space
above switch rails)
For Technical Support: www.panduit.com/resources/install_maintain.asp
INSTALLATION INSTRUCTIONS V00029ER
Page 3 of 4
FRONT OF
CABINET
Install Switch Ducting
-Secure DIFBA2002S00S switch ducting to equipment rails with [4] screws
-Do not tighten [2] bottom screws --- Leave slightly extended for Front Perforated Plate installation (see page 4)
[2] Bottom Screws
Provided with kit (with matching cage nuts if needed)
(leave slightly extended)
[2] Bonding Screws
Adjust Switch Ducting
-Use [4] wing nuts and tooth washers to adjust position of switch duct seals
-Install foam seal (if necessary) to seal ducting to bottom of switch
[4] Wing Nuts and Tooth Washers
Install Foam Seal
(if necessary)


Specyfikacje produktu

Marka: Panduit
Kategoria: Niesklasyfikowane
Model: DIFBA2002S00S

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Panduit DIFBA2002S00S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą