Instrukcja obsługi Panduit R4PFL

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Panduit R4PFL (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 8 użytkowników na średnio 4.1 gwiazdek

For Technical Support: www.panduit.com/resources/install_maintain.asp

Page 1 of 2

INSTALLATION INSTRUCTIONS

© Panduit Corp. 2010CM486

Finger Cable Managers for 4 Post Racks

Part Number(s): R4PFL,R4PFR

R4PFL R4PFR

(4) #12-24 X 12” Hex Head

Bonding Screws

(included with both R4PFL

and R4PFR)

Note: R4PFL and R4PFR are sold separately.

R4PFL Installation:

•The R4PFL may be installed anywhere on the outside of the left front post where a server or equipment will be installed.

•For maximum stability, install using front holes of rack post and finger manager and fasten using (4) #12-24 X 1/2” Hex Head Bond-

ing Screws. Be sure that finger flags are pointing upward. See Figure 1.

•If Vertical Patch Panel Brackets (CVPPB, sold separately) are used, then use the rear holes of rack post and finger manager and

fasten using (4) #12-24 X 1/2” Hex Head Bonding Screws. See Figure 2.

R4PFL

Finger flags

pointing upward

#12-24 X 1/2” Hex

Head Bonding Screws

Vertical Patch Panel Bracket

(CVPPB)

Front of rack

Front of rack

Figure 1Figure 2

Specyfikacje produktu