Instrukcja obsługi Panduit WBH4E

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Panduit WBH4E (1 stron) w kategorii Kable do komputerów PC i urządzeń peryferyjnych. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 4 użytkowników na średnio 4.7 gwiazdek

INSTALLATION INSTRUCTIONS

NETWORK CONNECTIVITY GROUP

© Panduit Corp. 2002Printed in U.S.A.

WORLDWIDE SUSIDIARIES AND SALES OFFICES

412 Rockwell Court

Burr Ridge, Illinois 60521

Technical Support: 866-405-6654

Fax: 708-444-6993

E-mail: netconnsupport@panduit.com

Web site: www.panduit.com/ncg

Page 1 of 1

CM23A

HINGED WALL MOUNT BRACKET

PART NUMBERS: WBH1, WBH2,WBH3, WBH4,

WBH2E, WBH4E, WBH6E

TO MOUNT BRACKET TO WALL OR19” RACK:

1. Determine desired wallor rackmounting location.

2. Insert appropriate hardware (screws not included)through keyways in rear of bracket and

fasten securely to wall, or insertthrough round holes and fasten securelyto rack..

3. Hinged bracket is removable so thatequipment can hinge open on either side.

TO INSTALL EQUIPMENT ONBRACKET:

1. Determine desired mountinglocationfor equipment.

2. Align equipment onbracket.

3. Insert #12-24 screws (not included) into equipmentand screwinto mounting bracket holes

on either side .

4. To access back of equipment, removeL-bracket screws.

NOTE: WBHE modelsare packagedwithout hinges or L-brackets installed.Mount hinges

and L-brackets onthe outside of the MainBracket asshown,usingthe supplied #12-24

screws and pem nuts.Makecertain thepem nuts are facing the back of theMainBracket.

L-Bracket for

quick access to

backof panels

Back opening for inwall

cable access

Main BracketHinged Bracket

Hinged Bracket

Screws

Cable Tie

or Tak-Ty

slots

Specyfikacje produktu