Instrukcja obsługi Pawa VM-99-T


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Pawa VM-99-T (6 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 16 osób i została oceniona przez 8.5 użytkowników na średnio 4.4 gwiazdek

Strona 1/6
V-MOUNT BATTERY
WITH D-TAP CHARGER
(99 WH, 150 WH)
User Manual
VM-99-T
VM-150-T
VM-99-T / VM-150-T
O R WV E V I E
1. Battery level check button
2. Battery level LED indicator
Shows the remaining battery capacity.
3. USB-A outpurt
Press the battery level check button to start charging or to
power your device.
4. D-Tap output and charging port
14.8 V, 10 A max output.
Connect the charger, and plug the power cord into an outlet
to charge the battery.
5. V-mount interface
1 4 532
Make sure the battery is fully charged before use.
When the battery is not in use, remove it from any
equipment. Some electronic equipment will draw
current, even when the switch is off.
Do not short-circuit the terminals. Short circuits may
cause severe damage to the battery.
Do not attempt to open the battery case under any
circumstances.
Do not remove the battery from any equipment that is
powered on. Always power off your equipment before
removing the battery.
S R UC SA F E T Y I N S T T I ON
P U A R E SR OD C T F E T U
Four-segment battery level indicators for real-time
monitoring of remaining battery capacity.
D-tap input/output connector powers your camera
accessories and connects to the included charger to
recharge the battery.
USB 2.0 Standard-A connector provides 5 V / 2 A to
power and charge USB devices.
Built-in control circuit for protection against over-
current, low voltage, overheating, and short circuits.


Specyfikacje produktu

Marka: Pawa
Kategoria: nieskategoryzowany
Model: VM-99-T

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Pawa VM-99-T, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą