Instrukcja obsługi Planet IGS-20160HPT

Planet nieskategoryzowany IGS-20160HPT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Planet IGS-20160HPT (16 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 3.8 gwiazdek

Pobierz PDF

Strona 1/16

User’s Manual of IGS-6325 Series

Industrial L3

16-Port 10/100/1000T 802.3at PoE+

2-Port 10/100/1000T + 2-Port 1G/2.5G SFP

Managed Ethernet Switch

IGS-20160HPT

User’s Manual of IGS-20160HPT

Trademarks

Contents are subject to revision without prior notice.

PLANET is a registered trademark of PLANET Technology Corp. All other trademarks belong to their respective owners.

Disclaimer

PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no

warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for

a particular purpose. PLANET has made every effort to ensure that this User's Manual is accurate; PLANET disclaims liability

for any inaccuracies or omissions that may have occurred.

Information in this User's Manual is subject to change without notice and does not represent a commitment on the part of

PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User's Manual. PLANET makes

no commitment to update or keep current the information in this User's Manual, and reserves the right to make improvements to

this User's Manual and/or to the products described in this User's Manual, at any time without notice.

If you find information in this manual that is incorrect, misleading, or incomplete, we would appreciate your comments and

suggestions.

FCC Warning

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated

in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the Instruction manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the

interference at his own expense.

CE Mark Warning

This device is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference.

Energy Saving Note of the Device

This power required device does not support Standby mode operation. For energy savings, please remove the power cable to

disconnect the device from the power circuit. Without removing the power cable, the device will still consume power from the

power source. In view of Saving the Energy and reducing the unnecessary power consumption, it is strongly suggested to

remove the power cable from the device if this device is not intended to be active.

WEEE Warning

To avoid the potential effects on the environment and human health as a result of the presence of hazardous

substances in electrical and electronic equipment, end users of electrical and electronic equipment should

understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of WEEE as unsorted municipal

waste and have to collect such WEEE separately.

Revision

User's Manual of PLANET Industrial L3 16-Port 10/100/1000T 802.3at PoE+ 2-Port 10/100/1000T + 2-Port 1G/2.5G SFP

Managed Ethernet Switch

FOR MODEL: IGS-20160HPT

REVISION: 3.0 (February, 2022), 4.0 (Oct., 2023)

Part No: EM-IGS-20160HPT_v3.0

User’s  Manual  of  IGS-20160HPT 
 

 
TABLE OF CONTENTS 
INTRODUCTION .................................................................................................................. 11 
1 Packet Contents ....................................................................................................................................... 11 
2 Product Description ................................................................................................................................. 12 
3 How to Use This Manual .......................................................................................................................... 21 
4 Product Features ...................................................................................................................................... 22 
5 Product Specifications ............................................................................................................................ 26 
INSTALLATION ................................................................................................................... 31 
1 Hardware Description .............................................................................................................................. 31 
1.1 Physical Dimensions ......................................................................................................................................... 32 
1.2 Front Panel ......................................................................................................................................................... 33 
1.3 LED Indications ................................................................................................................................................. 35 
1.4 Switch Upper Panel ........................................................................................................................................... 37 
1.5 Wiring the DC Power Input ............................................................................................................................... 38 
1.6 Wiring the Fault Alarm Contact ........................................................................................................................ 39 
1.7 Wiring the Digital Input/Output ......................................................................................................................... 40 
2 Installing the Industrial Managed PoE+ Switch .................................................................................... 42 
2.1 Installation Steps ............................................................................................................................................... 42 
2.2 DIN-rail Mounting ............................................................................................................................................... 43 
2.3 Wall-mount Plate Mounting............................................................................................................................... 45 
3 Cabling ...................................................................................................................................................... 46 
3.1 Installing the SFP Transceiver .......................................................................................................................... 47 
3.2 Removing the SFP Transceiver ........................................................................................................................ 51 
SWITCH MANAGEMENT .................................................................................................... 52 
1 Requirements ........................................................................................................................................... 52 
2 Management Access Overview .............................................................................................................. 53 
3 CLI Mode Management ............................................................................................................................ 54 
3.1 Logging on to the Console ............................................................................................................................... 55 
3.2 Remote Telnet .................................................................................................................................................... 56 
4 Web Management ..................................................................................................................................... 57 
5 SNMP-based Network Management ....................................................................................................... 58 
6 PLANET Smart Discovery Utility ............................................................................................................ 59 
WEB CONFIGURATION ...................................................................................................... 61 
1 Main Web page ......................................................................................................................................... 63 
2 System ...................................................................................................................................................... 65 
2.1 Management ....................................................................................................................................................... 66 

Specyfikacje produktu

Marka:	Planet
Kategoria:	nieskategoryzowany
Model:	IGS-20160HPT
Kolor produktu:	Blue, White
Materiał obudowy:	Aluminium
Wysokość produktu:	152 mm
Szerokość produktu:	86 mm
Głębokość produktu:	107 mm
Waga produktu:	1548 g
Certyfikaty:	FCC 15 A, CE
Standardy komunikacyjne:	IEEE 802.1D, IEEE 802.1Q, IEEE 802.1ab, IEEE 802.1ad, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Maksymalna szybkość przesyłania danych:	1000 Mbit/s
Pełny dupleks:	Tak
Obsługa PoE:	Tak
Zakres temperatur (eksploatacja):	-40 - 75 °C
Zakres wilgotności względnej:	5 - 95 %
Kod zharmonizowanego systemu (HS):	85176990
Szyfrowanie / bezpieczeństwo:	128-bit SSL, SNMP, SSH
Diody LED:	Activity, Link, PoE, Power, Power fail, Ring
Zakres temperatur (przechowywanie):	-40 - 85 °C
Dopuszczalna wilgotność względna:	5 - 95 %
Obsługa jakość serwisu (QoS):	Tak
Obsługa sieci VLAN:	Tak
Stopień ochrony IP:	IP30
Możliwości montowania w stelażu:	Nie
Przycisk reset:	Tak
Typ przełącznika:	Zarządzany
Podstawowe przełączanie RJ-45 Liczba portów Ethernet:	18
Podstawowe przełączania Ethernet RJ-45 porty typ:	Gigabit Ethernet (10/100/1000)
Obsługa 10G:	Nie
Wielkość tabeli adresów:	32000 wejścia
Przepustowość rutowania/przełączania:	46 Gbit/s
Bezpieczeństwo:	IEC60068-2-32, IEC60068-2-27, IEC60068-2-6
Liczba zainstalowanych modułów SFP:	2
Lista kontrolna dostępu (ACL):	Tak
Montaż naścienny / rzutowanie na sufit:	Tak
Podpora kontroli przepływu:	Tak
Przełącznik wielowarstwowy:	L2/L3
przekierowywanie IP:	Tak
Funkcje wirtualnej sieci LAN:	Stacked VLAN, Private VLAN, Tagged VLAN, Protocol-based VLAN, Port-based VLAN
Zgodny z Jumbo Frames:	Tak
Rozszerzenie Jumbo Frames:	10000
IGMP snooping:	Tak
Obsługa Multicast:	Tak
Całkowita Power over Ethernet (PoE) budżetu:	320 W
Technologia okablowania Copper Ethernet:	10BASE-T, 100BASE-T, 1000BASE-T
Store-and-forward:	Tak
Napięcie wejściowe DC:	48 - 56 V
Emisja ciepła:	123 BTU/h
Montaż DIN na szynie:	Tak
Auto-Negocjacja:	Tak
Technologia okablowania Fiber Ethernet:	1000BASE‑BX, 1000BASE‑LX, 1000BASE‑SX
Liczba VLANs:	255
Agregator połączenia:	Tak
Liczba grup multiemisji filtrowanych:	255
Dublowanie portów:	Tak
Ilość portów Fast Ethernet (PoE):	16
Zasilanie przez Ethernet (PoE) zakres napięcia:	48 - 56 V
Blokowanie portu terminala:	Tak
Pamięci bufora pakietów:	4 MB
Przepustowość:	34.2 Mpps
Pozycja routingu:	32
Obsługa MIB:	RFC-1213, IF, RFC-1493, RFC-1643, RFC-2863, RFC-2665, RFC-2819, RFC-2737, RFC-2618, RFC-2933, RFC-3411, LLDP, MAU
Tablica adresów MAC (multicast):	4094 wejścia
Liczba lini:	4
Tabela adresów IP:	8