Instrukcja obsługi Planet POE-175-95
Planet
Niesklasyfikowane
POE-175-95
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Planet POE-175-95 (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 6 użytkowników na średnio 4.6 gwiazdek
Strona 1/4
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
- 8 -
1. Package Contents
Thank you for purchasing PLANET POE-175-95 Single-port
10/100/1000Mbps 802.3bt PoE++ Injector.
Please unpack the box of the device carefully, and the box should
contain the following items:
802.3bt PoE injector x 1 User’s manual x 1
AC power cord x 1 Ground cable x 1
If any item is found missing or damaged, please contact your local
reseller for replacement.
3.ProductSpecications
Product POE-175-95
Hardware Specications
Interface
Input Port 1 x RJ45 STP Data In
Output Port 1 x RJ45 STP PoE (Data + Power) Out
AC Socket 1 x AC input socket
DIP Switch BT, UPoE or Legacy BT Mode
Network Cable
Twisted-pair cable up to 100 meters
(328ft)
10BASE-T: 4-pair UTP Cat. 3, 4, 5, 5e, 6
100BASE-TX: 4-pair UTP Cat. 5, 5e, 6
1000BASE-T: 4-pair UTP Cat. 5e, 6
LED Indicators
PWR x 1 (Green)
PoE-in-Use x 1 (Green)
PoE Max x 1 (Green)
Data Rate 10/100/1000Mbps
Dimensions (W
x
D
x
H) 170 x 100 x 40 mm
Weight 443g
Unit Output Voltage DC 54V
Power Requirements AC 100-240V, 1.8A max.
Power Consumption
Max. 1 watts/3.41 BTU (No Loading)
Max.111 watts/378.5 BTU (Full loading)
No. of Devices that
Can be Powered
1
LED Indicators:
10/100/1000T
EthernetEthernet+DC
PWR
PoE-in-Use
PoE Max.
POE-175-95
802.3bt PoE++ Injector
BTLegacy BT UPoE
LED Color Function
PWR Green Lights to indicate the device has power.
PoE-in-Use Green
Lights There is a PoE PD connected to the
port, which supplies power.
Blinks Indicates the port’s power supply is
abnormal.
O No PoE powered device (PD) connected.
Max. PoE
Usage
Green
Lights Indicating the output power reaches
80%
Operating Humidity
5 ~ 90%, relative humidity,
non-condensing
Storage Humidity
5 ~ 90%, relative humidity,
non-condensing
Caution
1. As IEEE 802.3bt device provides high power, please
use high-quality network cable and RJ45 connector.
2. The maximum PoE output power depends on the
cable length and the quality of cable.
2. Product Features
Interface
2 RJ45 interfaces
1-port Data input
1-port Data + Power output
1 AC 100-240V input power socket
1 DIP switch for selecting BT, UPoE or Legacy mode
Power over Ethernet
Complies with IEEE 802.3af/at/bt PoE end-span/mid-span PSE
Supports PoE power up to 95 watts for PoE port
Auto-detection of PoE IEEE 802.3af/at/bt devices that may be
damaged by incorrect installation
Monitor the status of the total PoE usage in real time
Remote power feeding up to 100m
Hardware
All-in-one compact size design
Internal power supply
LED indicators for power, PoE-in-Use and maximum PoE usage
Power over Ethernet
PoE DIP Switch
IEEE 802.3af/at/bt PSE
UPoE
Legacy BT
PoE Power Output
Budget
DC 54V / 95-watt PoE via 4-pair
PoE Power Output
Max. 95W@1 m cable
Max. 73W@100 m cable
PoE Power Supply Type End-span + Mid-span
Power Pin Assignment
Pair 1 End-span: 1/2 (-), 3/6 (+)
Pair 2 Mid-span: 4/5 (+), 7/8 (-)
Standards Conformance
Standards Compliance
IEEE 802.3 10BASE-T Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3ab 1000BASE-T Gigabit
Ethernet
IEEE 802.3bt 4-pair Power over Ethernet
Type 4
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3af Power over Ethernet
Regulatory Compliance FCC Part 15 Class A, CE
Surge Protection
Dierence Mode: ±2KV,
Common mode: ±4KV
Electrostatic standard Contact 6KV, air 8KV
Environment
Operating Temperature 0 ~ 50 degrees C
Storage Temperature -40 ~ 70 degrees C
4. Product Outlook
100-240V AC, 50/60Hz
10/100/1000T
EthernetEthernet+DC
PWR
PoE-in-Use
PoE Max.
POE-175-95
802.3bt PoE++ Injector
BTLegacy BT UPoE
Figure 1: Dimensions
5. Hardware Installation
The following section describes the hardware features of the
POE-175-95. Before connecting any network device to it, please
read this chapter carefully.
5.1 PoE Injector Grounding
A good grounding system is the groundwork for the smooth and
safe operation of the POE-175-95, and an excellent way to prevent
lightning strikes and resistance to interference. Please follow the
POE-175-95’s grounding specication instructions to ensure a good
grounding system.
Proper Grounding
When using an AC power source, the device must be grounded
with the green and yellow ground cables; otherwise, shock hazards
may occur when insulation resistance between the internal power
supply and the PoE Injector degrades.
Lightning and Grounding Protection
The lightning protection system is an independent system
consisting of a lightning rod, conductor and connection joint with
the grounding system. The grounding system usually is shared
with the ground reference, and green and yellow ground cables.
Lightning and grounding protection is a building requirement, not a
specic requirement of the PoE Injector.
The POE-175-95 provides chassis grounding post on its rear side.
Chassis grounding protection should be properly connected to the
grounding connector.
Specyfikacje produktu
| Marka: | Planet |
| Kategoria: | Niesklasyfikowane |
| Model: | POE-175-95 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Planet POE-175-95, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane Planet
8 Stycznia 2025
8 Stycznia 2025
8 Stycznia 2025
3 Stycznia 2025
3 Stycznia 2025
3 Stycznia 2025
3 Stycznia 2025
3 Stycznia 2025
7 Grudnia 2024
7 Grudnia 2024
Instrukcje Niesklasyfikowane
- Fieldmann
- Parisot
- Sanli
- Hunter
- GLORIA
- Ubiquiti Networks
- Woox
- 2box
- Ravelli
- Elgato
- Einhell Bavaria
- Bomann
- Comica
- Air Guard
- Gra-Vue
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025