Instrukcja obsługi Raspberry Pi Bluetooth v4 low energy USB dongle

Raspberry Pi Karta sieciowa/adapter Bluetooth v4 low energy USB dongle

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Raspberry Pi Bluetooth v4 low energy USB dongle (36 stron) w kategorii Karta sieciowa/adapter. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 7.5 użytkowników na średnio 4.8 gwiazdek

Pobierz PDF

Strona 1/36

BLUETOOTH SMART MODULE

CONFIGURATION GUIDE

Tuesday, 2 September 2014

Version 3.6

Bluegiga Technologies reserves the right to alter the hardware, software, and/or speciﬁcations detailed herein at

any time without notice, and does not make any commitment to update the information contained herein.

Bluegiga Technologies assumes no responsibility for any errors which may appear in this manual. Bluegiga

Technologies' products are not authorized for use as critical components in life support devices or systems.

Bluegiga Access Server, Access Point, APx4, AX4, BSM, iWRAP, BGScript and WRAP THOR are trademarks

of Bluegiga Technologies.

The trademark and logo are registered trademarks and are owned by the Bluetooth SIG, Inc.

Bluetooth

ARM and ARM9 are trademarks of ARM Ltd.

Linux is a trademark of Linus Torvalds.

All other trademarks listed herein belong to their respective owners.

Table of Contents

1 Version History ________________________________________________________________________ 4

2 Introduction ___________________________________________________________________________ 5

3 Project Conﬁguration File ________________________________________________________________ 6

3.1 <device> _________________________________________________________________________ 6

3.2 <gatt> ___________________________________________________________________________ 6

3.3 <hardware> _______________________________________________________________________ 8

3.4 <conﬁg> __________________________________________________________________________ 8

3.5 <script> __________________________________________________________________________ 8

3.6 <usb_main> _______________________________________________________________________ 8

3.7 <image> _________________________________________________________________________ 9

3.8 <ota> ____________________________________________________________________________ 9

3.9 <boot> __________________________________________________________________________ 10

3.10 Examples ________________________________________________________________________ 11

4 Hardware Conﬁguration File (hardware.xml) _________________________________________________ 12

4.1 <sleeposc> ______________________________________________________________________ 12

4.2 <script> _________________________________________________________________________ 13

4.3 <slow_clock> _____________________________________________________________________ 13

4.4 <lock_debug> ____________________________________________________________________ 14

4.5 <sleep> _________________________________________________________________________ 14

4.6 <wakeup_pin> ____________________________________________________________________ 16

4.7 <host_wakeup_pin> _______________________________________________________________ 18

4.8 <txpower> _______________________________________________________________________ 19

4.9 <pmux> _________________________________________________________________________ 20

4.10 <port> __________________________________________________________________________ 21

4.11 <usb> __________________________________________________________________________ 22

4.12 <usart> _________________________________________________________________________ 23

4.13 <timer_ticks> _____________________________________________________________________ 26

4.14 <timer> _________________________________________________________________________ 27

4.15 <otaboot> _______________________________________________________________________ 29

4.16 Endpoints _______________________________________________________________________ 30

4.17 Examples ________________________________________________________________________ 30

5 Application Conﬁguration File (conﬁg.xml) __________________________________________________ 31

5.1 <connections> ____________________________________________________________________ 31

5.2 <defrag> ________________________________________________________________________ 31

5.3 <manual_conﬁrm> _________________________________________________________________ 32

5.4 <script_timeout> __________________________________________________________________ 32

5.5 <throughput> _____________________________________________________________________ 33

5.6 <passkey> _______________________________________________________________________ 33

5.7 <user_data> _____________________________________________________________________ 34

5.8 <dfu> ___________________________________________________________________________ 34

5.9 Examples ________________________________________________________________________ 34

Specyfikacje produktu

Marka:	Raspberry Pi
Kategoria:	Karta sieciowa/adapter
Model:	Bluetooth v4 low energy USB dongle

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Raspberry Pi Bluetooth v4 low energy USB dongle, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Karta sieciowa/adapter Raspberry Pi

Raspberry Pi Bluetooth v4 low energy USB dongle Instrukcja

29 Września 2024

Instrukcje Karta sieciowa/adapter

Najnowsze instrukcje dla Karta sieciowa/adapter

Mikrotik RB493 Instrukcja

8 Kwietnia 2025

EtherWAN EX41941F Instrukcja

3 Kwietnia 2025

Vigitron MaxiiView Vi00023 Instrukcja

3 Kwietnia 2025

AVPro Edge AC-MXNET-10G-TCVR Instrukcja

2 Kwietnia 2025

EtherWAN TG103H-0802 Instrukcja

2 Kwietnia 2025

AVPro Edge MXNet AC-MXNET-10G-TCVR Instrukcja

1 Kwietnia 2025

ScreenBeam ECB6250 Instrukcja

30 Marca 2025

Ubiquiti Networks USW-Aggregation Instrukcja

29 Marca 2025

Vigitron Vi22601 Instrukcja

14 Marca 2025

Vigitron Vi22201 Instrukcja

14 Marca 2025