Instrukcja obsługi RCA 1103-1WTGA
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla RCA 1103-1WTGA (2 stron) w kategorii telefon. Ta instrukcja była pomocna dla 47 osób i została oceniona przez 24 użytkowników na średnio 4.9 gwiazdek
Strona 1/2
Slimline Phone
User’s Guide
Please read this manual before operating
product for the first time.
Visit the RCA web site at www.rca4phones.com
Model 1103
Equipment Approval Information
Your telephone equipment is approved for connection to the
Public Switched Telephone Network and is in compliance with
parts 15 and 68, FCC Rules and Regulations and the Technical
Requirements for Telephone Terminal Equipment published by
ACTA.
1 Notification to the Local Telephone Company
On the bottom of this equipment is a label indicating, among
other information, the US number and Ringer Equivalence
Number (REN) for the equipment. You must, upon request,
provide this information to your telephone company.
The REN is useful in determining the number of devices you may
connect to your telephone line and still have all of these devices
ring when your telephone number is called. In most (but not all)
areas, the sum of the RENs of all devices connected to one line
should not exceed 5. To be certain of the number of devices you
may connect to your line as determined by the REN, you should
contact your local telephone company.
A plug and jack used to connect this equipment to the premises
wiring and telephone network must comply with the applicable
FCC Part 68 rules and requirements adopted by the ACTA. A
compliant telephone cord and modular plug is provided with
this product. It is designed to be connected to a compatible
modular jack that is also compliant. See installation instructions
for details.
Notes
This equipment may not be used on coin service provided by the
telephone company.
Party lines are subject to state tariffs, and therefore, you may
not be able to use your own telephone equipment if you are on
a party line. Check with your local telephone company.
Notice must be given to the telephone company upon
permanent disconnection of your telephone from your line.
If your home has specially wired alarm equipment connected to
the telephone line, ensure the installation of this product does
not disable your alarm equipment. if you have questions about
what will disable alarm equipment, consult your telephone
company or a qualied installer.
This corded phone is a type that is not intended to be repaired
by customer (user).
US Number is located on the cabinet bottom.
REN Number is located on the cabinet bottom.
•
•
•
•
•
2 Rights of the Telephone Company
Should your equipment cause trouble on your line which may
harm the telephone network, the telephone company shall, where
practicable, notify you that temporary discontinuance of service
may be required. Where prior notice is not practicable and the
circumstances warrant such action, the telephone company may
temporarily discontinue service immediately. In case of such
temporary discontinuance, the telephone company must: (1)
promptly notify you of such temporary discontinuance; (2) aord
you the opportunity to correct the situation; and (3) inform you
of your right to bring a complaint to the Commission pursuant
to procedures set forth in Subpart E of Part 68, FCC Rules and
Regulations.
The telephone company may make changes in its communications
facilities, equipment, operations or procedures where such action
is required in the operation of its business and not inconsistent
with FCC Rules and Regulations. If these changes are expected to
aect the use or performance of your telephone equipment, the
telephone company must give you adequate notice, in writing, to
allow you to maintain uninterrupted service.
Interference Information
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference; and (2) This device must accept any
interference received, including interference that may cause
undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that
interference will not occur in a particular installation. Privacy of
Communications may not be ensured when using this product.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna (that is, the antenna
for radio or television that is “receiving” the interference).
Reorient or relocate and increase the separation between the
telecommunications equipment and receiving antenna.
Connect the telecommunications equipment into an outlet on
a circuit dierent from that to which the receiving antenna is
connected.
If these measures do not eliminate the interference, please
consult your dealer or an experienced radio/television technician
for additional suggestions. Also, the Federal Communications
Commission has prepared a helpful booklet, “How To Identify and
Resolve Radio/TV Interference Problems.” This booklet is available
from the U.S. Government Printing Oce, Washington, D.C. 20402.
Please specify stock number 004-000-00345-4 when ordering
copies.
Notice : The changes or modications not expressly approved
by the party responsible for compliance could void the user's
authority to operate the equipment.
Hearing Aid Compatibility (HAC)
This telephone system meets FCC standards for Hearing Aid
Compatibility.
FCC RF Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 centimeters
between the radiator and your body. This transmitter must not be
co-located or operated in conjunction with any other antenna or
transmitter.
•
•
•
Industry Canada (I.C.) Notice
This product meets the applicable Industry Canada technical
specications.
Le présent materiel est conforme aux specications techniques
applicables d'Industrie Canada.”
The Ringer Equivalence Number is an indication of the maximum
number of terminals allowed to be connected to a telephone
interface. The termination on an interface may consist of any
combination of devices subject only to the requirement that the
sum of the Ringer Equivalence Numbers of all the devices does not
exceed ve.
L'indice d'équivalence de la sonnerie (IES) sert à indiquer le nombre
maximal de terminaux qui peuvent être raccordés à une interface
téléphonique. La terminaison d'une interface peut consister en
une combinaison quelconque de dispositifs, à la seule condition
que la somme d'indices d'équivalence de la sonnerie de tous les
dispositifs n'excède pas 5.''
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
Modular
telephone
line jack
Wall plate
IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions
should always be followed to reduce the risk of re, electric shock
and injury to persons, including the following: 1. Do not use this
product near water, for example, near a bath tub, wash bowl,
kitchen sink or laundry tub, in a wet basement or near a swimming
pool. 2. Avoid using a telephone (other than a cordless type) during
an electrical storm. There may be a remote risk of electric shock
from lightning. 3. Do not use the telephone to report a gas leak in
the vicinity of the leak.
Introduction
Your telephone is designed to give you exibility in use and high
quality performance. To get the most from your new telephone, we
suggest that you take a few minutes right now to read through this
instruction manual.
CAUTION: When using telephone equipment, there are
basic safety instructions that should always be followed.
Refer to the IMPORTANT SAFETY INSTRUCTIONS
provided with this product and save them for future
reference.
NOTE: This phone uses Touch-Tone dialing service only. For
this telephone to function properly, you must use Touch-Tone
service available through your local telephone company.
Before You Begin
Telephone Jack Requirements
To use this phone, you need an RJ11C type
modular telephone jack, which might look like
the one pictured here, installed in your home. If
you don’t have a modular jack, call your local
phone company to nd out how to get one
installed.
Important Installation Information
Never install telephone wiring during a lightning storm.
Never install telephone jacks in wet locations unless the jack is
specically designed for wet locations.
Never touch non-insulated telephone wires or terminals, unless
the telephone line has been disconnected at the network
interface.
Use caution when installing or modifying telephone lines.
Temporarily disconnect any equipment connected to the phone
such as faxes, other phones, or modems.
Handset Layout
•
•
•
•
•
Installing the Phone
Your telephone should be placed on a level surface such as a
desk or table top, or you can mount it on a wall. A desktop/wall
mounting pedestal is built into the base of the phone.
Slide the RINGER volume switch (on the handset) to the desired
volume.
Set the receiver volume switch (on the handset) to the desired
listening volume.
Plug the telephone line cord into a modular wall phone jack.
Store the extra cord in the grooves in the base.
Wall Mount Installation
Your telephone may also be mounted on a wall plate (not included).
NOTE: In desktop or wall mount mode, you may want to wrap
the excess telephone line cord around the mounting bracket on
the bottom of the base.
1.
2.
3.
4.
Telephone Operation
Redial
This unit redials up to 32 digits. To automatically redial the last
number you called:
Pick up the handset and wait for a dial tone.
Press the redial button.
Flash
Press the button to activate custom calling services such as ash
call waiting or call transfer. Custom calling services are provided
by the phone company.
Receiver Volume
You may control the listening level with the volume switch on the
bottom of the handset. It has 3 levels: lo, mid, and high.
Ringer Volume
You may control the ringer volume level with the switch located
below the redial button on the handset.
= ringer tone will be loud
= ringer tone will be low
= telephone will not ring
Troubleshooting Tips
No dial tone.
Press and release the hook switch. Check the hook switch: Does
it fully extend when the handset is lifted from the cradle?
Phone doesn’t ring.
Make sure RINGER switch (located on the handset) is set to loud
or low.
Are you using too many phones on one line? (The total REN
of all phones on the same line should not be greater than the
maximum REN for your calling area. See Equipment Approval
Information).
Other party cannot hear you.
Make sure phone cord is securely plugged in.
Make sure extension phones are on the hook at the same time
you’re using the phone. It is normal for the volume to drop when
additional extension phones are used at the same time.
Phone “howls” when handset is placed near the base and handset
volume level is too high.
This is normal feedback due to handset volume level being set
to maximum.
General Product Care
To keep your telephone working and looking good, follow these
guidelines:
Avoid putting the phone near heating appliances and
devices that generate electrical noise (for example, motors or
uorescent lamps).
Do not expose to direct sunlight or moisture.
Avoid dropping and other rough treatment to the phone.
Clean with a soft cloth.
Never use a strong cleaning agent or abrasive powder because
this will damage the nish.
Retain the original packaging in case you need to ship the
phone at a later date.
Warranty Assistance
Your sales receipt will be required to demonstrate proof of
purchase in order to validate your warranty eligibility. You may
want to attach either the original, or a photocopy, of your sales
receipt to this booklet for future reference.
If this product was received as a gift, it is suggested you jot down
the date of gift receipt, as this information will be valuable should
service be required during the warranty period. If the equipment is
causing harm to the telephone network, the telephone company
may require that you disconnect the equipment until the problem
is resolved.
Purchase Date or Date Received as Gift
Name of Store
For instructions on how to obtain warranty service, you may call Cus-
tomer Care at 1-877-722-4908 or you may visit our website at
www.rca4phones.com. If you prefer, you may write to us at:
Supreme Power USA LLC
PO Box 501045
Indianapolis IN 46250-1045
Please do not send products to this address as it only adds
delays in service and may result in lost or damaged product.
This PO BOX is for written communication only.
If the equipment is causing harm to the telephone network, the
telephone company may require that you disconnect the equip-
ment until the problem is resolved.
1.
2.
•
•
•
•
•
•
•
•
•
•
•
•
1103
Printed in China
10-36
FLASH
(button)
REDIAL
(button)
Receiver
volume
switch
Ringer
volume
switch
Limited Warranty
What your limited warranty covers:
Defects in materials or workmanship.
For how long after your purchase:
One year, from date of purchase. Please retain your sales
receipt, as that will act as your proof of purchase in order to
validate warranty status.
What we will do:
Provide you with a new or, at our option, a refurbished exchange
unit of same or similar model. The exchange model is under
warranty for the remainder of the original product's one year
warranty, or 90 days from the date the replacement product
was shipped to you, whichever is longer.
How to get service:
Call Customer Care at 1-877-722-4908. Please have your
product with you and please have your model number and date
code available when calling us. The model number and date
code can be found on the underside of the base unit.
If you are within your limited warranty period and it is
determined that service is required:
We will ask that you properly pack your product to avoid
shipping damage. We recommend that you use the original
carton and packing materials.
We will ask you to include with your product the following:
Your name, return shipping address and daytime phone
number handwritten or typed on a sheet of paper
A legible copy of your sales receipt ( please do not send the
original sales receipt )
Ship your product prepaid, to the address we provide. We
suggest shipping your product via a traceable carrier, as we are
not responsible for lost, mis-directed or damaged shipments.
You may want to write the date shipped, carrier and tracking
number here:
Upon receipt of your product we will validate your product is
under warranty and if determined your product is warranty
eligible, we will ship to you a new or, at our option, a refurbished
exchange unit of same or similar model. This exchange unit will
be shipped to you at no cost.
What your limited warranty does not cover:
Customer Instruction. (Your Owners Manual provides information
regarding operating and install instructions. Additional
information may be obtained by contacting the retailer)
Installation and set up service adjustments.
Batteries.
Damage from misuse, neglect, unauthorized repair.
Products which have been modied or incorporated into other
products
Products that have been serviced by an unauthorized servicer.
Products purchased or serviced outside the USA or Canada.
Acts of nature, such as but not limited to, lightning damage.
Limitation of Warranty:
T HI S LI M I TE D WA RRA N T Y I S TH E O NLY WA R RAN T Y
APPLICABLE TO THIS PRODUCT. ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES
OF MERCHANTABILIT Y OR FITNESS FOR A PARTICULAR
PURPOSE) ARE HEREBY DISCLAIMED. NO VERBAL OR WRITTEN
INFORMATION GIVEN BY SUPREME POWER USA LLC, ITS
AGENTS, EMPLOYEES, RETAIL DEALERS OR INDEPENDENT
CONTRACTORS SHALL CREATE A GUARANTY OR IN ANY WAY
INCREASE THE SCOPE OF THIS WARRANTY.
REPAIR OR REPL ACEMENT AS PR OVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER.
SUPREME P OWER USA LLC SHALL NOT BE LIABLE FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES RESULTING FROM
THE USE OF THIS PRODUCT OR ARISING OUT OF ANY BREACH
OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT.
THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY
ARE GOVERNED BY THE LAWS OF THE STATE OF INDIANA
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED TO THE
APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
How state law relates to this warranty:
Some states do not allow the exclusion nor limitation of incidental
or consequential damages, or limitations on how long an implied
warranty lasts so the above limitations or exclusions may not
apply to you.
This warranty gives you specific legal rights, and you also may
have other rights that vary from state to state.
If you purchased your product outside the USA or Canada:
This warranty does not apply. Contact your dealer for warranty in-
formation.
Product Registration:
Please complete and mail the Product Registration Card packed
with your product or visit to register www.rca4phones.com
your new product . Product registration is not required for
warranty coverage but does allow us to contact you should it be
necessary.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Please do not send any products to the Indianapolis address listed in
this manual or on the carton. This will only add delays in service for
your product.
Visit the RCA web site at www.rca4phones.com
Plug the telephone line cord into a modular wall phone jack.
Slip the mounting holes on the base over the wall plate posts
and rmly slide the unit down into place (wall plate not included).
1.
2.
Specyfikacje produktu
| Marka: | RCA |
| Kategoria: | telefon |
| Model: | 1103-1WTGA |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z RCA 1103-1WTGA, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje telefon RCA
8 Września 2024
5 Września 2024
31 Sierpnia 2024
29 Sierpnia 2024
29 Sierpnia 2024
29 Sierpnia 2024
26 Sierpnia 2024
26 Sierpnia 2024
26 Sierpnia 2024
25 Sierpnia 2024
Instrukcje telefon
- Gamdias
- HMD
- Anker
- Essentiel B
- Blackberry
- Akuvox
- T-Mobile
- Apple
- Tiptel
- Sennheiser
- Jabra
- Aastra
- Logitech
- Sagem
- Hagenuk
Najnowsze instrukcje dla telefon
3 Kwietnia 2025
30 Marca 2025
29 Marca 2025
18 Marca 2025
5 Marca 2025
5 Marca 2025
5 Marca 2025
5 Marca 2025
1 Marca 2025
1 Marca 2025