Instrukcja obsługi Ridgid KWIK-SPIN+


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ridgid KWIK-SPIN+ (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 9.5 użytkowników na średnio 4.3 gwiazdek

Strona 1/3
KWIK-SPIN
+
Hand
Spinner Instructions
WARNING
Wear appropriate protective equipment
including safety glasses and leather
gloves. Drains may contain hazardous
chemicals or bacteria.
If you have any question concerning this
RIDGID
®
product:
Contact your local RIDGID distributor.
Visit RIDGID.com to find your local RIDGID
contact point.
Contact RIDGID Technical Services Depart-
ment at rtctechservices@emerson.com, or in
the U.S. and Canada call (800) 519-3456.
Figure 1 – KWIK-SPIN
+
Hand Spinner
Specifications
The KWIK-SPIN
+
Hand Spinner cleans
drain lines up to 1½" in diameter. It is not rec-
ommended for toilets. The cable is positively
retained in the drum to prevent cable pullout.
Before Use
Inspect KWIK-SPIN
+
Hand Spinner. Do not
use if damaged. Inspect the drain. Determine
if chemicals are present. Some chemicals
have specific health and handling consider-
ations that should be provided by the manu-
facturer. Confirm KWIK-SPIN
+
hand spinner
is appropriate for the job.
Drain Access
Thread through crosshairs (Figure 2).
Unscrew cleanout plug or remove trap
(Figure 3).
KWIK-SPIN
+
Hand Spinner
999-999-473-10,
REV. A.
Printed 7/17
EC43071
© 2017, RIDGID, Inc.
The Emerson logo and RIDGID logo are registered trademarks of Emerson Electric Co. or RIDGID, Inc. in the U.S. and other countries.
All other trademarks belong to their respective holders.
Pop-up Drain: Remove lift rod and drain
plug (Figure 4).
Bathtub overflow: Remove overflow plate
and internal mechanism (Figure 5).
Operating Instructions
1. Insert cable into drain. Position unit as close
to drain as possible. Squeeze trigger to
engage the AUTOFEED
®
mechanism.
2. Turning drum clock-
wise advances cable.
Counter-clockwise
re-tracts cable.
Cable can also be
rapidly advanced/
retracted by hand.
Advance cable until
you encounter the blockage (Figure 6).
3.
Work cable through blockage. DO NOT force
cable. Work cable back and forth 2-3 times.
4.
Retract cable (Figure 7). After flow is estab-
lished, if possible run water to clear debris
and clean cable (Figure 8
).
5.
Rinse cable and drum. Air dry before storage
to prevent rust
.
AUTOFEED
®
Mechanism
Cable
Trigger Handle
Crank
Drum
Figure 2 Figure 3
Figure 4 Figure 5
Figure 6
Figure 7 Figure 8
KWIK-SPIN is a registered trademark of RIDGID, Inc. in the U.S.


Specyfikacje produktu

Marka: Ridgid
Kategoria: Niesklasyfikowane
Model: KWIK-SPIN+

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Ridgid KWIK-SPIN+, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Niesklasyfikowane Ridgid

Ridgid

Ridgid C-12 Instrukcja

12 Stycznia 2025
Ridgid

Ridgid K-750 Instrukcja

12 Stycznia 2025
Ridgid

Ridgid FlexShaft Instrukcja

8 Października 2024
Ridgid

Ridgid HKO-186 Instrukcja

2 Października 2024
Ridgid

Ridgid Raprench 10 Instrukcja

2 Października 2024
Ridgid

Ridgid KT-190 Instrukcja

2 Października 2024
Ridgid

Ridgid 760 FXP Instrukcja

2 Października 2024
Ridgid

Ridgid 700 Instrukcja

2 Października 2024
Ridgid

Ridgid micro CA-350 Instrukcja

2 Października 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

SmallRig

SmallRig VB99 SE Instrukcja

29 Stycznia 2025
QSC

QSC TSC-8 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5130 Instrukcja

29 Stycznia 2025
Sunding

Sunding SD-581G Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS5070 Instrukcja

29 Stycznia 2025
XTRARM

XTRARM XTR-FS2010 Instrukcja

29 Stycznia 2025
OSEE

OSEE TX402 Instrukcja

29 Stycznia 2025