Instrukcja obsługi Ridgid SeeSnake Mini Pro
Ridgid
Niesklasyfikowane
SeeSnake Mini Pro
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ridgid SeeSnake Mini Pro (40 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 4.5 użytkowników na średnio 4.5 gwiazdek
Strona 1/40

For support and additional infor-
mation about using your See Snake
Mini Pro go to support.seesnake.
com/mini-pro or scan this QR code.
• Français – 13
• Español – 27
WARNING!
Read this Operator Man-’s
ual carefully before using
this tool. Failure under-to
stand and follow the con-
tents of this manual may
result in electrical shock,
fire, and/or serious per-
sonal injur y.
Operator’s Manual

2 – English – Mini Pro
Table of Contents
Introduction
Regulatory Statements ���������������������������������������������������������������������������������������������3
Safety Symbols ��������������������������������������������������������������������������������������������������������� 3
General Safety Rules
Work Area Safety ������������������������������������������������������������������������������������������������������4
Electrical Safety ��������������������������������������������������������������������������������������������������������4
Personal Safety �������������������������������������������������������������������������������������������������������� 4
Equipment Use and Care �����������������������������������������������������������������������������������������5
Pre-Operation Inspection ������������������������������������������������������������������������������������������6
See Snake Mini Pro Overview
Description���������������������������������������������������������������������������������������������������������������� 7
Compatibility �������������������������������������������������������������������������������������������������������������7
TruSense® Technology ����������������������������������������������������������������������������������������������7
Specifications �����������������������������������������������������������������������������������������������������������8
Standard Equipment �������������������������������������������������������������������������������������������������8
System Components ������������������������������������������������������������������������������������������������9
Specific Safety Information
See Snake Mini Pro Safety ����������������������������������������������������������������������������������������9
Operating Instructions
Placement ���������������������������������������������������������������������������������������������������������������10
Inspection Overview �����������������������������������������������������������������������������������������������10
Pipe Guides ������������������������������������������������������������������������������������������������������������ 11
Maintenance and Support
Cleaning �����������������������������������������������������������������������������������������������������������������11
Maintaining Components ����������������������������������������������������������������������������������������11
Storage �������������������������������������������������������������������������������������������������������������������11
Support �������������������������������������������������������������������������������������������������������������������11
Service and Repair �������������������������������������������������������������������������������������������������12
Disposal ������������������������������������������������������������������������������������������������������������������12
*Original Instructions – English

Mini Pro – English – 3
Introduction
The warnings, cautions, and instruc-
tions discussed in this manual can-
not cover all possible conditions
and situations that may occur. It
must be understood by the opera-
tor that common sense and caution
are factors that cannot be built into
this product, but must be supplied
by the operator.
Regulatory Statements
The EU Declaration of Conformity
(999-995-232.10) will accompany
this manual as a separate booklet
when required.
This device complies with Part 15
of FCC rules. Operation is subject
to the following two conditions:
(1) This device may not cause
harmful interference, and (2) this
device must accept any interfer-
ence received, including interfer-
ence that may cause undesired
operation.
UK Importer
Ridge Tool UK (RIDGID)
44 Baker Street
London W1U 7AL, UK
Safety Symbols
In this manual and on the product, safety
symbols and signal words are used to com-
municate important safety information. This
section is provided to improve understand-
ing of these signal words and symbols.
This is the safety alert symbol. It is
used to alert you to potential per-
sonal injury hazards. Obey all
safety messages that follow this
symbol to avoid possible injury or
death.
DANGER
DANGER indicates a hazardous situation
which, if not avoided, will result in death or
serious injury.
WARNING
WARNING indicates a hazardous situation
which, if not avoided, could result in death
or serious injury.
CAUTION
CAUTION indicates a hazardous situation
which, if not avoided, could result in minor
or moderate injury.
NOTICE
NOTICE indicates informa-
tion that relates to the pro-
tection of property.
This symbol means read the oper-
ator’s manual carefully before
using the equipment. The manual
contains important information on
the safe and proper operation of
the equipment.
This symbol means always wear
safety glasses with side shields or
goggles when handling or using
this equipment to reduce the risk
of eye injury.
This symbol indicates the risk of
electrical shock.
Specyfikacje produktu
Marka: | Ridgid |
Kategoria: | Niesklasyfikowane |
Model: | SeeSnake Mini Pro |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Ridgid SeeSnake Mini Pro, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane Ridgid
12 Stycznia 2025
12 Stycznia 2025
12 Stycznia 2025
8 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
Instrukcje Niesklasyfikowane
- Niesklasyfikowane Mitsubishi
- Niesklasyfikowane DCG
- Niesklasyfikowane Uniprodo
- Niesklasyfikowane Fisher
- Niesklasyfikowane Champion
- Niesklasyfikowane Sprolink
- Niesklasyfikowane Extralife Instruments
- Niesklasyfikowane Spring
- Niesklasyfikowane Turmix
- Niesklasyfikowane Eligent
- Niesklasyfikowane NEO Tools
- Niesklasyfikowane Fluke
- Niesklasyfikowane I-TEC
- Niesklasyfikowane Flaem
- Niesklasyfikowane Eller
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025