Instrukcja obsługi Rock N Roller R2RT


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Rock N Roller R2RT (2 stron) w kategorii Nie skategoryzowane. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 4.3 gwiazdek

Strona 1/2
R2RT Model Specifications
Your RocknRoller Multi-Cart shipping box should
contain a frame and the following parts:
Recommended Tools For Assembly
Length (Compact) 26” 2 x ½” at washers
Length (Extended) 2 x ½” lock nuts39”
Channel Lock Pliers
(not included)
Width (Frame Bed) 1 x 1” (25 mm) square plastic endplugs11”
Height (Folded) 2 x x 1 cotter pins6.5 18
Height (Unfolded) 2 x 16 mm at washer30.75”
Front Casters 4” x1 2 x 6”x 1.5” (150 mm x 37 mm) wheels
Rear Wheels 6” x 1.5 2 x 4”x 1” (100 mm x 25 mm) stem casters
Weight 15.4 lbs. 1 x Flat Wrench
Load Capacity 350 lbs. 1 x Assembly/instruction sheet
1. Installing Rear Wheels
Gently slide wheel over axle as shown.
Do not force wheels onto axle. It is
recommended to lubricate axles with light
grease before installing. Install cotter pins
and bend ends outward.
2. Installing Front Swivel Casters
Attach front swivel casters as shown. While tightening lock nuts, grip
bearing cap with channel lock pliers or pipe wrench to prevent threaded
stem from turning. Tighten lock nutsrmly, but not excessively tight.
Check lock nut tightness on caster stems periodically.


Specyfikacje produktu

Marka: Rock N Roller
Kategoria: Nie skategoryzowane
Model: R2RT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Rock N Roller R2RT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Nie skategoryzowane Rock N Roller

Instrukcje Nie skategoryzowane

Najnowsze instrukcje dla Nie skategoryzowane