Instrukcja obsługi Roland KSCFP10
Roland
Niesklasyfikowane
KSCFP10
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Roland KSCFP10 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 24 osób i została oceniona przez 12.5 użytkowników na średnio 4.1 gwiazdek
Strona 1/2
KSCFP10
Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES.” After reading, keep the document(s) where it will be
available for immediate reference.
5Make sure that another person is on hand to help with the assembly and setup.
5Be very careful, when you assemble and move the piano, to make sure that you do not drop it on your hands
or feet.
5Prepare an area in which you can perform the assembly safely.
5Do not use a power tool (e.g., an electric screwdriver) to assemble the stand. You risk damaging or stripping
the screws.
5The KSCFP10 is designed specically to be used with the FP-10.
© 2019 Roland Corporation
Parts Check
Before you begin assembling the stand, check that all the parts ere
supplied.
A B
C
1
2
3
4
5
ASide board (left) 1 pcs.
BSide board (right) 1 pcs.
CCenter board 1 pcs.
1Stabilizers (screw holes left) 2 pcs.
2Stabilizers (screw holes right) 2 pcs.
3Screws with pointed tip (4 x 14 mm) 12 pcs.
4Short screws (M5 x 12 mm) 6 pcs.
5Long screws (M5 x 20 mm) 4 pcs.
Assembly Procedure
* You will need a Phillips screwdriver.
* Fasten each screw tightly, then place the stand in a stable and
horizontal place.
1 Attaching the Stabilizers
Attach the stabilizers to the side boards, and use the screws with pointed
tip to fasten them.
1
2A
Position the screw holes of the stabilizers on the same side as the side
board’s metal xtures.
1
2
AB
1
2
3
2 Stand Assembly
Use the short screws to fasten the side boards and the center board.
* At rst, assemble the entire stand in a temporary fashion, without
really tightening the screws. Then, after checking the overall
alignment of the boards (and gently shifting certain parts where
necessary), go around and tightly fasten each of the screws.
A
B
Position the metal xtures of
the side boards inward.
Keyboard side
Rear
C
Position the metal
parts of the center
board so that they
face the rear.
4
3 Installing the Piano on the Stand
Place the piano unit on the stand, and use the long screws to fasten it
securely.
Keyboard side
5
When placing the
piano unit on the
stand, take care not to pinch
your ngers!
B
A
Completed Appearance
Owner’s Manual
Keyboard stand for FP-10 USING THE UNIT SAFELY
Used for instructions intended to alert the
user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic animals
or pets.
Used for instructions intended to alert the
user to the risk of death or severe injury
should the unit be used improperly.
The symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In the
case of the symbol at left, it means that the power-cord
plug must be unplugged from the outlet.
The symbol alerts the user to important instructions or
warnings.The specific meaning of the symbol is
determined by the design contained within the triangle. In
the case of the symbol at left, it is used for general
cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never be
carried out (are forbidden). The specific thing that must
not be done is indicated by the design contained within
the circle. In the case of the symbol at left, it means that
the unit must never be disassembled.
About WARNING and CAUTION Notices About the Symbols
ALWAYS OBSERVE THE FOLLOWING
IMPORTANT NOTES
WARNING
Do not disassemble or modify by
yourself
Do not carry out anything unless
you are instructed to do so in the
owner’s manual. Otherwise, you
risk causing malfunction.
Do not repair or replace parts by yourself
Refer all servicing to your retailer,
the nearest Roland Service Center,
or an authorized Roland distributor,
as listed on the “Information.”
Do not use or store in the following types
of locations
• Subject to temperature extremes
(e.g., direct sunlight in an
enclosed vehicle, near a heating
duct, on top of heat-generating
equipment); or are
• Damp (e.g., baths, washrooms,
on wet oors); or are
• Exposed to steam or smoke; or are
• Subject to salt exposure; or are
• Exposed to rain; or are
• Dusty or sandy; or are
• Subject to high levels of vibration and
shakiness; or are
• Placed in a poorly ventilated location.
Do not place in an unstable location
Otherwise, you risk injury as the
result of the unit toppling over or
dropping down.
Be cautious to protect children from
injury
Always make sure that an adult is
on hand to provide supervision
and guidance when using the
unit in places where children are
present, or when a child will be using the
unit.
Do not drop or subject to strong impact
Otherwise, you risk causing
damage or malfunction.
CAUTION
Use the stand only for the specied
products
This stand is designed specically
to be used with the Roland FP-10.
If used in combination with other
products, you risk sustaining
injuries as the result of the product dropping
down or toppling over due to a lack of
stability.
Evaluate safety issues before using
stands
Even if you observe the cautions
given in the owner’s manual,
certain types of handling may
allow this product to fall from the
stand, or cause the stand to overturn. Please
be mindful of any safety issues before using
this product.
Avoid climbing on top of the unit, or
placing heavy objects on it
Otherwise, you risk injury as the
result of the unit toppling over or
dropping down.
Cautions when moving this unit
If you need to move the
instrument, take note of the
precautions listed below. At least
two persons are required to safely
lift and move the unit. It should be handled
carefully, all the while keeping it level.
Make sure to have a rm grip, to protect
yourself from injury and the instrument from
damage.
• Check to make sure the screws securing
the unit to the stand have not become
loose. Fasten them again securely
whenever you notice any loosening.
• Disconnect the power cord.
• Disconnect all cords coming from external
devices.
• Remove the music rest.
Keep small items out of the reach of
children
To prevent accidental ingestion
of the parts listed below, always
keep them out of the reach of small
children.
• Included Parts
Screws
Stabilizers
Placement
• Do not allow lighting devices that normally
are used while their light source is very close
to the unit (such as a piano light), or powerful
spotlights to shine upon the same area of the
unit for extended periods of time. Excessive
heat can deform or discolor the unit.
• Do not paste stickers, decals, or the like to
this instrument. Peeling such matter o the
instrument may damage the exterior nish.
• Depending on the material and temperature
of the surface on which you place the unit, its
rubber feet may discolor or mar the surface.
Maintenance
• To clean the unit, use a dry, soft cloth; or
one that is slightly dampened. Try to wipe
the entire surface using an equal amount of
strength, moving the cloth along with the
grain of the wood. Rubbing too hard in the
same area can damage the nish.
• Never use benzine, thinners, alcohol or
solvents of any kind, to avoid the possibility of
discoloration and/or deformation.
• As with any wood-crafted product, some
expansion and contraction of the wood can
occur depending on the way the unit is used
and the environment in which it is used. Over
time, this can cause some of the screws to
start coming loose. To ensure safe, worry-free
use of the unit, you should periodically check
the tightness of the screws shown in the
illustration. If you nd any that are loose, use a
screwdriver to tighten them.
Additional Precautions
• The sound of keys being struck and vibrations
produced by playing an instrument can be
transmitted through a oor or wall to an
unexpected extent. Please take care not to
cause annoyance to others nearby.
• This document explains the specications of
the product at the time that the document
was issued. For the latest information, refer to
the Roland website.
* 5100061930- 01*
11
Specyfikacje produktu
| Marka: | Roland |
| Kategoria: | Niesklasyfikowane |
| Model: | KSCFP10 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Roland KSCFP10, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane Roland
29 Grudnia 2024
21 Grudnia 2024
21 Grudnia 2024
10 Grudnia 2024
10 Grudnia 2024
10 Grudnia 2024
10 Grudnia 2024
10 Grudnia 2024
10 Grudnia 2024
10 Grudnia 2024
Instrukcje Niesklasyfikowane
- Deltaco Gaming
- Telefunken
- Solis
- Tzumi
- Hasbro
- King
- Esotec
- Seidio
- Upo
- Toolcraft
- 2box
- Sure-Fi
- PVI
- Vtech
- Manhattan
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025