Instrukcja obsługi RYOBI STM460
RYOBI
Niesklasyfikowane
STM460
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla RYOBI STM460 (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 17 osób i została oceniona przez 9 użytkowników na średnio 4.3 gwiazdek
Strona 1/2
MOUNTING/REMOVING THE SHELVING
BRACKET
See Figures 1 - 2.
Mount the wall rails as described in the wall rail’s
operator’s manual.
Position the bracket between two of the raised octagonal
patterns on the wall rail.
Push the bracket in and down to secure.
Insert the bottom of the retention tab into the slot on
the front of the wall bracket and pull forward to secure.
It is recommended to insert #10 screw into the hole in the
bracket through the hole in the wall rail for extra support.
Repeat steps to mount additional brackets.
To remove the bracket:
NOTE: If applicable, remove the support screw.
Slide the bracket up and away from the wall rail.
ATTACHING/REMOVING ACCESSORIES
See Figures 3-4.
To attach the solid shelf accessory:
There are four tabs on this solid shelf, two tabs on each
side.
Place the shelf into the bracket channel, snapping the
back two tabs rst.
Bring the shelf forward then snap the front two tabs,
making sure the front lip is seated properly.
Push on shelf to ensure the accessory is seated properly.
To remove the solid shelf:
Pull up on the entire shelf to remove.
To attach the wire shelf accessory:
Place the back of the wire shelf into the bracket channel.
Bring the shelf forward and seat it on the bracket tab
then snap it in place.
Push on shelf to ensure the accessory is seated properly.
To remove the wire shelf:
Push up the back underside of the shelf then disengage
the snap t feature in the front of the bracket.
PRODUCT SPECIFICATIONS
Maximum Weight Capacity*
2-In-1 Shelving Bracket 25 lbs. per bracket ......................
STM461 Solid Shelf 50 lbs. each (not included) ................
STM462 Wire Shelf 50 lbs. each (not included) .................
*Wall rails must be secured to the wall according to the instructions in
the wall rail’s operator’s manual to achieve maximum weight capacity.
WARNING:
Read all safety warnings and all instructions. Failure
to follow the warnings and instructions may result in
electric shock, re and/or serious injury.
READ ALL INSTRUCTIONS
Know your product. Read operator’s manual carefully.
Learn its applications and limitations, as well as the
specific potential hazards related to this product.
Following this rule will reduce the risk of serious personal
injury.
This accessory should only be used with the RYOBI
Link Modular Storage System. Using this accessory
with other storage systems could result in a falling hazard
that can cause death or serious personal injury.
The maximum weight of all the items placed on each
2-in-1 shelving bracket must not exceed 25 lbs.
Do not exceed the maximum weight capacity for the
2-in-1 shelving bracket or accessories.
Secure and mount each wall rail according to the wall
rail’s operator’s manual. DO NOT place accessories on
wall rails that have been improperly secured or mounted.
To reduce risk of injury, do not use accessories which
are not specifically designed and recommended by
the manufacturer.
Do not use wall rail if it is damaged or broken. A
damaged or broken wall rail may not mount securely
and/or it might not provide adequate support for the
items stored on it.
Ensure the wall rails are securely mounted. Make sure
they do not rock, slide, or move before storing products
or tools.
Do not allow children or untrained individuals to use
wall rails or accessories.
Store idle power tools out of the reach of children.
Always remove battery pack and bits/blades when
storing battery powered tools on organizer shelf.
SAVE THESE INSTRUCTIONS. Refer to them frequently
and use them to instruct other users. If you loan someone
this product, also loan these instructions.
SYMBOLS
OPERATOR’S MANUAL
STM460 2-IN-1 SHELVING BRACKET
TTI CONSUMER POWER TOOLS, INC.
P.O. Box 1288, Anderson, SC 29622
Phone 1-800-525-2579 • www.ryobitools.com
FEATURES
INSTALLATION
SAFETY RULES
The following signal words and meanings are intended
to explain the levels of risk associated with this product.
SYMBOL SIGNAL MEANING
DANGER:
Indicates a hazardous
situation, which, if not
avoided, will result in
death or serious injury.
WARNING:
Indicates a hazardous
situation, which, if not
avoided, could result in
death or serious injury.
CAUTION:
Indicates a hazardous
situation, that, if not
avoided, may result in
minor or moderate injury.
NOTICE:
(Without Safety Alert
S y m b o l ) I n d i c a t e s
information considered
important, but not related
to a potential injury (e.g.
messages relating to
property damage).
Some of the following symbols may be used on this
product. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you
to operate the product better and safer.
SYMBOL NAME
DESIGNATION/
EXPLANATION
Safety
Alert
Indicates a potential
personal injury hazard.
Read
Operator’s
Manual
To reduce the risk of
injury, user must read and
understand operator’s
manual before using this
product.
Eye
Protection
Always wear eye protection
with side shields marked to
comply with ANSI Z87.1.
999000217
5-3-23 (REV:02)
A - 2-in-1 shelving bracket (support d’étagère 2-en-1, soporte para estante 2
en 1)
B - Material retention tab (languette de retenue du matériau, lengüeta de
sujeción del material)
STM460
A
B
A - 2-in-1 shelving bracket (support d’étagère 2-en-1, soporte para estante
2 en 1)
B - Wall rail (rail mural, riel de pared)
Fig. 2
Fig. 1
B
A
C
A
B
D
1
2
B
A
A - 2-in-1 shelving bracket (support d’étagère 2-en-1, soporte para estante 2
en 1)
B - Material retention tab (languette de retenue du matériau, lengüeta de
sujeción del material)
C - Tab (languette, pestaña)
D - Slot (fente, ranura)
WARNING:
To reduce the risk of injury, do not attempt to use this
product until you have read thoroughly and understand
completely this operator’s manual and the operator’s
manual for any power tools used.
Fig. 3
A - 2-in-1 shelving bracket (support d’étagère 2-en-1, soporte para estante 2
en 1)
B - Solid shelf accessory (accessoire d’étagère solide, accesorio para estante
sólido)
C - Tab (languette, pestaña)
D - Slot (fente, ranura)
Fig. 4
A - 2-in-1 shelving bracket (support d’étagère 2-en-1, soporte para estante 2
en 1)
B -Wire shelf accessory (accessoire d’étagère métallique, accesorio para
estante de alambre)
C - Channel (canaliser, canal)
B
B
A
A
C
C
D
Specyfikacje produktu
| Marka: | RYOBI |
| Kategoria: | Niesklasyfikowane |
| Model: | STM460 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z RYOBI STM460, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane RYOBI
4 Stycznia 2025
26 Grudnia 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
Instrukcje Niesklasyfikowane
- Analog Way
- Xblitz
- Euromaid
- Navman
- First Alert
- FSR
- Honda
- Approx
- Mega
- Genki Instruments
- Stirling
- Fisher & Paykel
- Thermex
- Rusta
- UAvionix
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025