Instrukcja obsługi Samsung UN24H4000AF
Samsung
Telewizory LED
UN24H4000AF
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Samsung UN24H4000AF (4 stron) w kategorii Telewizory LED. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 10 użytkowników na średnio 4.9 gwiazdek
Strona 1/4
Air
If your TV is connected to an antenna choose , and then press Air
ENTER
E
. The TV will automatically start memorizing channels.
Cable
If your TV is connected to a cable outlet, choose , and then Cable
press ENTER
E
. Go to Step 3.
Auto
If you choose , and then press Auto ENTER
E
, the TV will
automatically select the correct Antenna source. Go to Step 3.
3. On the Cable Type screen, use the ◄/►/▲/▼ buttons to select
the type of digital and analog cable systems you have: , , STD HRC
or Most systems are (Standard). When done, select IRC. STD
Start, and then press ENTER
E
. The TV will start memorizing
channels.
✎Channel memorization can take up to 45 minutes, depending
on your cable system.
✎Memorized channels are added to the Added Channels
list. These are the channels you will see when you use the
Channel buttons on your remote.
Clear Scrambled Channel
This function filters out scrambled channels after is Auto Program
completed. This process may take up to 20~30 minutes.
✎Press the ENTER
E
button to stop the Clear Scrambled
Channel.
✎This function is only available in mode. Cable
Managing Channels
Channel List
See your list of Added channels, Favorite channels, or channels
you've scheduled for viewing. Add or delete Favorite channels, add
or delete channels from the Added Channels list, schedule channels
or programs for viewing. Watch a channel by selecting the channel
in the , or screen, pressing All Channels, Added Channels Favorite
the / buttons, and then pressing the ▲ ▼ ENTER
E
button.
Added Channels
6 Air
6-1 ♥ TV #6
7-1 ♥ TV #7
8 Air
9 Air
9-1 ♥ TV #9
10 Air
10-1 ♥ TV #10
11-1 ♥ TV #11
Air Zoom Select ''T Tools
Channel List Screens icons are listed on the left side. Select an
icon using the buttons to view each list. ▲/▼
■
All Channels: Shows all currently available channels including
those you deleted from the list.Added Channels
■
Added Channels Added Channels: Shows all . These are the
channels that appear when you press the button.CH LIST
■*
Favorite: Shows all favorite channels.
■
Programmed: Shows all channels and programs currently
scheduled using .Timer Viewing
✎Remote control buttons active on the Channel List screen.
xGreen (Zoom): Enlarges or shrinks a channel number.
xYellow (Select): Move the cursor to a channel. Press the Yellow
button to select the channel. A
c
mark appears. Repeat to select
additional channels. Then, open the Tools menu and apply a
function to the channels you selected.
x
T
( ): Displays the Tools menu. (The Tools Channel List Tools
menus may differ depending on the situation.)
Display Icons Used in the Channel List Screens
Icons Meaning
c
A selected channel.
*
A Favorite channel.
)
A reserved program.
(
A program currently being broadcast.
The Channel List Tools Menu
t
The Channel List Tools menu contains most of the functions you
can use on the
All Channel
,
Added Channels
, and
Favorite List
screens. To view, select a list screen, select a channel, and then
press the
TOOLS
button.
■
Add / Delete: Delete a channel from or add a channel to the
Added Channels list.
To delete channels from the list, follow these steps:Added Channels
1. Select one or more channels in the list using Added Channels
the buttons and the Yellow Select button on your remote.▲/▼
2. Press the button on your remote. The Tools menu TOOLS
appears.
3. Select in the Tools menu, and then press the Delete ENTER
E
button.
To add channels to the list, follow these steps:Added Channels
1. Select one or more channels in the list using the All Channels
▲/▼ buttons and the Yellow Select button on your remote.
2. Press the button on your remote. The Tools menu TOOLS
appears.
3. Select in the Tools menu, and then press the Add ENTER
E
button.
✎All deleted channels will be shown on the All Channels list.
You add channels back to the list on the Added Channels
All Channels list.
✎A gray-colored channel indicates the channel has been
deleted from the Added Channels list.
✎The menu option only appears for deleted channels.Add
■
Add to Favorite/Delete from Favorite: Lets you add channels to
and delete channels from your list.Favorites
To add channels to the list, follow these steps:Favorites
1. Select one or more channels in the list using the All Channels
▲/▼ buttons and the Yellow Select button on your remote.
2. Press the button on your remote. The Tools menu TOOLS
appears.
3. Select in the Tools menu, and then press the Add to Favorite
ENTER
E
button.
To delete channels from the list, follow these steps:Favorites
1. Select one or more channels in the Channels list Favorite
using the buttons and the Yellow Select button on your ▲/▼
remote.
2. Press the button on your remote. The Tools menu TOOLS
appears.
3. Select in the Tools menu, and then Delete from Favorite
press the ENTER
E
button.
■
Timer Viewing: You can schedule a channel to be displayed
automatically at a set time, even when you are watching another
channel. You must set the current time first in the > Time Clock
function to use .Time Viewing
To schedule a channel, follow these steps:
1. Select a channel in the list using the Added Channels ▲/▼
buttons and the Yellow Select button on your remote.
2. Press the button on your remote. The Tools menu TOOLS
appears.
3. Select in the Tools menu, and then press the Time Viewing
ENTER
E
button. The Time Viewing screen appears.
Antenna Channel Repeat
▲
DTV Air 6-1 Once
▼
L
Move
U
Adjust
E
Enter
R
Return
Timer Viewing
Date Start Time
01-01-2014 12 : 01 am
4. Use the buttons to move from entry field to entry field ◄/►
and the ▲/▼ buttons to change the entries. Where numbers
are displayed, you can also enter numbers directly using the
number keypad on your remote.
✎If you select or , the date you Everyday Every Week
select in the Date field becomes the start date for your
scheduled viewing. For Everyday, the TV will turn on
every day, at the time you selected, starting from that
date. For , the TV will turn on every week, Everyweek
on the same day of the week as the start date you
selected, at the time you selected, from that day on. If
you select , the TV will turn on once, on the date Once
and time you selected.
5. Press the ENTER
E
button on your remote when done.
✎Only Added Channels can be scheduled.
✎Scheduled programs and channels are displayed in the
Programmed List.
✎When you select a digital channel, press the ► button to
view the digital program list. If you highlight a program in
the list, and then press the ENTER
E
( ) button, Schedule
you set Timer Viewing for that program directly.
■
Channel Name Edit: Analog channels only. Lets you assign a
name of up to five characters to an analog channel. For example,
Hist, Food, Golf, etc. This makes it easier to find and select a
channel.
■
Select All: Select all the channels in the displayed channel list.
■
Deselect All: Deselect all the selected displayed channels.
✎You can only select when one or more Deselect All
channels are selected.
■
Auto Program Auto Program: See under Memorizing Channels.
Programmed List (on the Channel List Screen)
The list displays the channels and programs you Programmed
have scheduled for viewing using the function. You Time Viewing
can view, modify, or delete a show you have scheduled using the
functions on the List screen Tools menu.Programmed
Programmed List Screen Tools Menu
t
■
Change Info: Change the scheduling information for a show or
channel you have scheduled.
To change the information, follow these steps:
1. Select the List icon on the left side of the Programmed
Channel List screen, and then press the ENTER
E
button.
2. On the List screen, select the show or channel Programmed
entry you want to change, and then press the button. TOOLS
The Tools menu appears.
3. Select , and then press the Change Info ENTER
E
button.
The screen appears.Time Viewing
4. Use the buttons to move from entry field to entry field ◄/►
and the ▲/▼ buttons to change the entries. Where numbers
are displayed, you can also enter numbers directly using the
number keypad on your remote.
5. Press the ENTER
E
button when done.
■
Cancel Schedules: Cancel a show or channel you have
scheduled.
To cancel a scheduled show or channel, follow these steps:
1. Select the List icon on the left side of the Programmed
Channel List screen, and then press the ENTER
E
button.
2. On the List screen, select the show or channel Programmed
entry you want to cancel, and then press the button. TOOLS
The Tools menu appears.
3. Select , and then press the Cancel Schedules ENTER
E
button. The screen appears.Cancel Schedule
4. Select , and then press the OK ENTER
E
button.
■
Information: Display the information for a show or channel you
have scheduled. You can also change the schedule Information.
1. Select the List icon on the left side of the Programmed
Channel List screen, and then press the ENTER
E
button.
2. On the List screen, select the show or channel Programmed
entry you want information for, and then press the TOOLS
button. The Tools menu appears.
3. Select , and then press the Information ENTER
E
button.
The Information screen appears.Time Viewing
4. Select and press the Change Info ENTER
E
button to
change information, or select and press the Close ENTER
E
button to close the Information screen.
■
Select All / Deselect All: You can select or deselect all channels
in the channel list.
Other Channel Menu Functions
Channel Mode (Added Channels/Favorite
Channels)
Lets you select the channel list displayed when you press the
< >CH (Channel) button on your remote. For example, if you
select Favorite Channels, you will only see Favorite channels when
you press the button.< >CH
Fine Tune
Analog channels only.
If the reception is clear, you do not have to fine tune the channel,
as this is done automatically during the search and store
operation. If the signal is weak or distorted, fine tune the channel
manually.
✎Select the channel, and then select Fine Tune.
✎Fine tuned channels that have been saved are marked with
an asterisk “*” on the right-hand side of the channel number
in the channel banner.
✎To reset fine-tuning, select the channel, select Fine Tune, and
then select on the Reset Fine Tune screen.
Setup Menu
Plug & Play
Lets you re-run the initial setup procedure. For Plug & Play
instructions, see your Quick Start Guide.
Language
Set the menu language.
✎Choose between English, and Español, Français.
Setting the Time
Time
✎The time you set will appear when you press the INFO
button.
■
Clock: Set the clock so you can use the various timer features
of the TV.
✎If you disconnect the power cord, you have to set the
clock again.
To set the clock, follow these steps:
1. Select > > .Setup Time Clock
2. Press ENTER
E
and select or , and then press Auto Manual
ENTER
E
again.
If you selected Auto:
The TV will automatically download the correct time from a
digital channel.
• Select , and then press the Time Zone ENTER
E
button.
Use the buttons to select your , and then ▲/▼ Time Zone
press ENTER
E
.
• Select DST (Daylight Savings Time), and then press
ENTER
E
. Select if you want to turn the DST On
adjustment on and off manually. Select to turn off the Off
DST adjustment. Select if you want the TV to adjust Auto
to DST automatically. Press ENTER
E
when done.
✎DST and function are only available when Time Zone
the is set to .Clock Mode Auto
If you selected Manual:
The screen appears. Use the buttons to Clock Set ▲/▼
change the values in each field or use the number buttons to
enter the values directly. Use the buttons to move from ◄/►
field to field. When done with all the fields, press ENTER
E
.
✎Available only when is set to Clock Mode Manual.
■
Sleep Timer
t
Automatically shuts off the TV after a preset period of time. (30,
60, 90, 120, 150 and 180 minutes).
✎To cancel the Sleep Timer, select Off.
Timer 1 / Timer 2 / Timer 3
Turns the TV on and off automatically at times and days you
select. You can set three different on/off timer settings.
✎You must set the clock first.
■
On Time / Off Time: Set the hour, minute, am/pm, and
Activate/Inactivate fields for the and . Use the On Time Off Time
◄/► ▲/▼ buttons to move from field to field. Use the buttons
to change the values in each field. To activate the timer with
the setting you have chosen, set the Activate/Inactivate field to
Activate.
■
Volume: Set the desired loudness.
■
Contents: To select what will be turned on when the timer
setting is activated. You can set the TV to turn on a specific
channel or play back contents such as photo or audio files.
Use the buttons to move to move to the Contents field, ◄/►
and then press the ENTER
E
button. The Contents screen
appears. Use the buttons to move from field to field. Use ◄/►
the buttons to change the values in each field.▲/▼
- TV/USB: Select or . The USB device must be TV USB
connected to your TV before you can select USB.
- Antenna: Displays the current antenna source, or .Air Cable
- Channel: If you have selected TV, select the desired channel.
- Music/Photo: If you have selected USB, follow these steps to
select a folder containing MP3 (Music) or JPEG (Photo) files on
the USB device:
✎The maximum displayed number of files, including sub
folders, in one folder of USB storage device is 2000.
✎The media may not be playing smoothly when using the
device lower than USB 2.0.
1. Use the buttons to move to the field under ◄/► Music
or the field under , and then press the Photo ENTER
E
button. The TV displays a single folder (the Root folder)
and the type or name of the device.
2. Press the ENTER
E
button. A list of folders on the device
appears.
✎If there are no folders on your device, press the
Yellow select button to select the Root folder, and
then press the button. The Timer screen RETURN
re-appears.
3. Use the buttons to highlight a folder that contains ▲/▼
music or photos, and then press the Yellow select button
to select the folder.
4. Press the button. The Timer screen re-appears.RETURN
■
Repeat Once Everyday Mon~Fri Mon~Sat: Select , , , ,
Sat~Sun Manual Manual or . If you select , you can select the
days you want to activate the timer by using the buttons ◄/►
to highlight the day, and then pressing the ENTER
E
button.
To unselect a day, highlight it, and then press the ENTER
E
button.
When you finished making all your selections on the Timer screen,
press either the ENTER
E
or button.RETURN
The On Screen Menus
Your TV has two kinds of menus, the Main menu and the various
Tools menus. The Main menu gives you access to most or all of
the menu options available on your TV. The Tools menus display
a selected number of frequently used menu options that change
depending on the screen you are viewing.
The Main menu has seven primary categories:
yPicture yInput
ySound yApplication
yChannel ySupport
ySetup
To view the Main menu, press the button on your remote. To MENU
view a Tools menu, press the button on your remote.TOOLS
✎The menu options that appear in the Main menu depend
on the Source you have selected. For example, if you have
selected the HDMI source, the Channel category will not
appear. To see the Channel category, you must first select TV
in the Source List.
The Menu options are presented below, arranged by Main menu
categories. A Tools button symbol
(
t
) next to an option
name indicates the option is also available in one of the Tools
menus.
Picture Menu
Mode
t
Select your preferred picture mode.
✎When your TV is connected to a PC, you can only select
Entertain and Standard
.
■
Dynamic: Brightens the screen. Suitable for a bright room.
■
Standard: Suitable for a normal.
■
Movie: Darkens the screen, making it less glary. Suitable for
watching movies in a darkened room.
■
Entertain: Sharpens the picture. Suitable for games.
✎Only available when the is connected to a TV PC.
Backlight / Contrast / Brightness / Sharpness /
Color / Tint (G/R)
■
Backlight: Adjusts the brightness of the screen by adjusting the
brightness of the individual pixels.
■
Contrast: Increases or decreases the contrast between dark and
light areas of the picture.
■
Brightness: Adjusts the brightness of the screen. Not as
effective as Backlight.
■
Sharpness: Sharpens or dulls the edges of objects.
■
Color: Adjusts the color saturation. The higher the Color setting,
the more intense the color. Low settings remove color and the
picture becomes black, white and gray.
■
Tint (G/R): Adjusts the amount of green and red in the picture.
As you increase the amount of green, the amount of red
decreases and vice versa.
✎When the TV is connected to a PC, you can only make
changes to Backlight, Contrast, Brightness, and
Sharpness.
Picture Options
✎When the TV is connected to a PC, you can only make
changes to the Color Tone HDMI Black Level, Size and .
■
Color Tone (Cool / Standard / Warm) Cool: makes the picture
bluer (cooler). Warm make the picture redder (warmer).
■
Size: Set the size and aspect ratio of the picture on the screen.
Your cable box or satellite receiver may have its own set of
screen sizes as well. However, we highly recommend you use
the TVs 16:9 mode most of the time.
✎The menu is deactivated, when the H. 264 (1080p) DTV is
being played.
16:9: Sets the picture to the 16:9 wide screen format.
Zoom1: Provides moderate magnification of the picture. Sides,
top, and bottom are cut off.
Zoom2: Provides larger magnification of the picture. Sides, top,
and bottom are cut off.
Wide Fit: Enlarges the aspect ratio of the picture so the picture
fits the entire screen.
4:3: Sets the picture to the old, 4:3 format and puts black or gray
borders on the right and left of the picture.
✎Do not watch your TV in the 4:3 format for a long time.
Traces of borders displayed on the left, right and center of
the screen may cause image retention (screen burn) which
is not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when
your TV is inputting HDMI (720p / 1080i / 1080p) or Component
(1080i / 1080p) HD signals.
✎HD (High Definition) has a 16:9 aspect ratio and 1080i/1080p
(1920x1080) or 720p (1280x720) resolution.
✎You can adjust and store settings for each external device you
have connected to an input on the TV. Picture Sizes available
by Input Source are listed below:
Input Source Picture Size
ATV, AV, Component (480i, 480p) 16:9 Zoom1 , ,
Zoom2 4:3,
DTV (1080i), Component (1080i, 1080p), HDMI
(720p, 1080i, 1080p)
16:9 Wide Fit , ,
4:3 Screen Fit,
■
Digital Clean View (Off / Low / Medium / High / Auto) : If the
broadcast signal received by your TV is weak, you can activate
the feature to reduce any static and ghosting Digital Clean View
that may appear on the screen.
✎When the signal is weak, try all the Digital Clean View
options until the TV displays the best picture.
■
HDMI Black Level (Normal / Low) : For HDMI signals, select
the black level to adjust the screen depth. Low make blacks look
darker.
✎Available only in HDMI mode (RGB signals).
■
Film Mode (Off / Auto) : Sets the TV to automatically sense and
process film signals from all sources and adjusts the picture for
optimum quality.
✎Available in ATV, DTV (interlace), AV, COMPONENT (480i /
1080i) and HDMI (480i / 1080i).
■
Motion Lighting (Off / On): Reduce power consumption by
brightness control adapted motion.
✎Available in Standard mode only.
Picture Reset
■
Picture Reset (Reset Picture Mode/Cancel): Resets the
picture settings to their factory defaults.
Other Features
Program Rating Lock
The feature lets you block programs Program Rating Lock
you've determined are inappropriate for your children based on
the program's ratings. To access the Program Rating Lock
feature and make any changes, you must enter a PIN (personal
identification number). To watch a blocked program, you must also
enter the same PIN.
✎Program Rating Lock is not available in HDMI or
Component mode.
✎The default PIN number of a new TV set is “0-0-0-0”. You can
set your own PIN using the Change PIN function.
How It Works
When you access the Menu functions for Program Rating Lock
the first time, the PIN input screen appears. Enter 0-0-0-0. The PIN
screen closes and the Program Rating Lock Menu appears. Every
time you access the functions, the PIN Program Rating Lock
screen will appear and you must enter a PIN.
When the Rating Lock screen appears, select Program Rating
Lock, and then press ENTER
E
. Select , and then press the On
ENTER
E
key again. Depending on what type of programs or
movies you want to block, select one of the options on the screen,
and then press the ENTER
E
button. The options are listed below:
■
TV Parental Guidelines: You can block TV programs based
on their ratings. This function allows you to control what your
children are watching.
■
MPAA Rating: You can block movies based on their MPAA
ratings. The Motion Picture Association of America (MPAA) has
implemented a rating system that provides parents or guardians
with advanced information on which films are appropriate for
children.
■
Canadian English: You can block TV programs based on their
Anglophone Canadian ratings.
■
Canadian French: You can block TV programs based on their
French Canadian ratings.
■
Downloadable U.S. Rating: Parental restriction information can
be used while watching DTV channels.
Locking/Blocking Programs or Movies
You lock or block programs and/or movies in essentially the same
way for each option. Each option displays a grid or table. All the
tables have ratings listed on the left. The TV Parental Guidelines
option also has kinds of content listed across the top: : Lock all ALL
TV ratings. / : Fantasy violence / : Violence / : Sexual situation FV V S
/ : Adult Language / : Sexually Suggestive Dialog.L D
To lock/block movies or shows with certain ratings and/or kinds of
content, click the square next to the rating and/or under the kind of
content. A lock appears. To unlock/unblock, click the square again.
When you click a low rating, all the ratings above it will also display
locks. You can also Allow All or Lock All. When done, press the
RETURN button on your remote.
■
Change PIN: The Change PIN screen will appear. Choose any
4 digits for your PIN and enter them in fields. Enter New PIN
Re-enter the same 4 digits in fields. When the Confirm New PIN
Change PIN screen disappears, press the button. The TV OK
has memorized your new PIN.
✎If you forget the PIN, press the remote-control buttons in
the following sequence, which resets the pin to “0-0-0-0” :
POWER POWER (off) → MUTE 8 2 4 →→→→ (on)
Game Mode (On/Off)
When you connect a game console such as a PlayStation™
or Xbox™ to your TV, you can enjoy a more realistic gaming
experience by turning on the function.Game Mode
✎Precautions and limitations for game mode:
xBefore you disconnect the game console and connect another
external device, set Game Mode to Off in the setup menu.
xIf you display the TV menu in Game Mode, the screen shakes
slightly.
✎Game Mode is not available when the input source is set to
TV.
✎After connecting the game console, set Game Mode to On.
You may notice slightly reduced picture quality.
Caption
(On-Screen Text Dialogue)
■
Caption: You can switch the caption function on or off. If
captions are not available, they will not be displayed on the
screen.
✎The feature does not work in or Caption Component
HDMI mode.
■
Caption Mode: You can select the desired caption mode.
Default / CC1~CC4 / Text1~Text4: (analog channels only) The
Analog Caption function operates in either analog TV channel
mode or when a signal is supplied from an external device to the
TV. (Depending on the broadcasting signal, the Analog Caption
function may or may not work with digital channels.)
Default / Service1~Service6 / CC1~CC4 / Text1~Text4:
(Digital channels only) The Digital Captions function works with
digital channels.
✎Service1~6 may not be available in digital caption mode
depending on the broadcast.
■
Digital Caption Options: (Digital channels only)
Size Default Small Standard Large: Options include , , and . The
default is .Standard
Font Style Default Styles 0 7: Options include and to . The
default is .Style 0
Foreground Color Default White Black Red: Options include , , , ,
Green Blue Yellow Magenta Cyan, , , and . You can change the
color of the letters. The default is .White
Background Color Default White Black: Options include , , ,
Red Green Blue Yellow Magenta Cyan, , , , and . You can change
the background color of the captions. The default is .Black
Foreground Opacity: This adjusts the opacity of text. Options
include , Default Transparent Translucent Solid Flashing, , and .
Background Opacity: This adjusts the opacity of the
caption background. Options include , Default Transparent,
Translucent Solid Flashing, and .
Return to Default Size Font Style: This option sets each , ,
Foreground Color Background Color Foreground Opacity, ,
and to its default.Background Opacity
✎Digital Caption Options are available only when you can
select and in .Default Service1 ~ Service6 Caption Mode
✎The Foreground and Background cannot be set to the
same color.
Figures and illustrations in this User Manual are provided for reference
only and may differ from actual product appearance. Product design and
specifications may be changed without notice.
Important Warranty Information Regarding
Television Format Viewing
✎See the warranty card for more information on warranty
terms.
Wide screen format LED Displays (16:9, the aspect ratio of the
screen width to height) are primarily designed to view wide screen
format full-motion video. The images displayed on them should
primarily be in the wide screen 16:9 ratio format, or expanded to
fill the screen if your model offers this feature and the images are
constantly moving. Displaying stationary graphics and images on
screen, such as the dark sidebars on non- expanded standard
format television video and programming, should be limited to no
more than 5% of the total television viewing per week. Additionally,
viewing other stationary images and text such as stock market
reports, video game displays, station logos, web sites or computer
graphics and patterns, should be limited as described above for
all televisions. Displaying stationary images that exceed the above
guidelines can cause uneven aging of LED Displays that leave
subtle, but permanent burned-in ghost images in the LED picture.
To avoid this, vary the programming and images, and primarily
display full screen moving images, not stationary patterns or dark
bars. On LED models that offer picture sizing features, use these
controls to view different formats as a full screen picture. Be careful
in the selection and duration of television formats you use for
viewing. Uneven LED aging as a result of format selection and use,
as well as burned-in images, are not covered by your Samsung
limited warranty.
•SAMSUNGELECTRONICSNORTHAMERICANLIMITED
WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations
of the original Limited Warranty supplied with Samsung Electronics
(SAMSUNG) products, and the requirements, conditions, exclusions
and limitations contained herein, SAMSUNG will additionally
provide Warranty Repair Service in the United States on SAMSUNG
products purchased in Canada, and in Canada on SAMSUNG
products purchased in the United States, for the warranty period
originally specified, and to the Original Purchaser only.
The above described warranty repairs must be performed by a
SAMSUNG Authorized Service Center. Along with this Statement,
the Original Limited Warranty Statement and a dated Bill of Sale
as Proof of Purchase must be presented to the Service Center.
Transportation to and from the Service Center is the responsibility of
the purchaser. Conditions covered are limited only to manufacturing
defects in material or workmanship, and only those encountered
in normal use of the product. Excluded, but not limited to, are
any originally specified provisions for, in-home or on-site services,
minimum or maximum repair times, exchanges or replacements,
accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please
call toll-free:
–– In the United States : 1-800-SAMSUNG (1-800-726-7864)
–– In Canada : 1-800-SAMSUNG
Still image warning
Avoid displaying still images (such as jpeg picture files) or still
image elements (such as TV channel logos, TV shows or movies
in panorama or 4:3 format, stock or news scroll bars, etc.) on the
screen. The constant display of still pictures can cause ghosting or
image burn-in (image retention) on the LED screen, which will affect
image quality. To reduce the risk of this effect, please follow the
recommendations below:
•Avoid displaying the same TV channel for long periods.
•Always try to display any image in full screen mode. Use the TV's
Picture Options menu to select the optimal screen size.
•Reduce brightness and contrast values to the minimum required
to achieve the desired picture quality. Values that exceed the
minimum may speed up the burn-in process.
•Frequently use all TV features designed to reduce image retention
and screen burn-in. Refer to proper user manual section for
details.
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products,
please contact the SAMSUNG customer care center.
Country CANADA U.S.A
Address
Samsung Electronics
Canada Inc. 2050 Derry
Road West, Mississauga,
Ontario L5N 0B9 Canada
Samsung Electronics
America, Inc. 85
Challenger Road
Ridgefield Park, NJ 07660
Customer Care
Center 1-800-SAMSUNG (726-7864)
Web Site
www.samsung.com/ca/
support (English)
www.samsung.com/ca_fr/
support (French)
www.samsung.com/us/
support
LED TV
user manual
© 2014 Samsung Electronics Co., Ltd. All rights reserved.
- 2 -- 1 -
- 6 -- 5 -
- 3 -
- 7 -
- 4 -
- 8 -
BN68-05829K-02
Sound Menu
Mode
t
■
Standard: Selects the normal sound mode.
■
Music: Emphasizes music over voices.
■
Movie: Provides the best sound for movies.
■
Clear Voice: Emphasizes voices over other sounds.
Equalizer
Available in Standard sound mode only.
■
Balance L/R: Adjusts the balance between the right and left
speaker.
■
100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth
Adjustment): Adjusts the loudness of specific bandwidth
frequencies.
■
Reset: Resets the equalizer to its default settings.
DTS TruSurround
Available in Standard sound mode only.
DTS TruSurround is a patented DTS technology that solves
the problem of playing 5.1 multichannel content over two
speakers. TruSurround delivers a compelling, virtual surround
sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible with all
multichannel formats.
Preferred Language
Digital channels only.
Digital-TV broadcasts can transmit many audio tracks
simultaneously (for example, simultaneous translations of a program
into foreign languages).
✎You can only select a language from among the ones being
broadcast.
Multi-Track Sound (MTS)
Analog channels only.
■
Mono: Select for channels that are broadcasting in mono or if
you are having difficulty receiving a stereo signal.
■
Stereo: Select for channels that are broadcasting in stereo.
■
SAP: Select to listen to the Separate Audio Program, which is
usually a foreign-language translation.
✎Depending on the program being broadcast, you can listen to
Mono, Stereo or SAP.
Auto Volume
Automatically adjusts the volume level when you change video
sources or content so the level remains the same.
SPDIF Output
The SPDIF (Sony Philips Digital InterFace) outputs an
uncompressed digital audio signal when you connect the digital
audio jack on the back of the TV to a digital audio in jack on a
receiver or home theater.
■
Audio Format (PCM/Dolby Digital): You can select the Digital
Audio output (SPDIF) format. The available Digital Audio output
format may differ depending on the input source.
✎By connecting the TV to a receiver or home theater with
Dolby Digital and 5.1ch speakers and selecting Dolby
Digital, you can maximize your interactive 3D sound
experience.
■
Audio Delay: Lets you correct timing mismatches between the
audio track and the video when you are watching the TV and
listening to digital audio output from the TV through an external
device such as an AV receiver. When you select , a Audio Delay
slider appears. Use the left and right arrow buttons to adjust the
slider. Press ENTER
E
when done (0ms ~ 250ms).
Speaker Select
A sound echo may occur due to a difference in decoding speed
between the main speaker and the audio receiver. In this case, set
the TV to .External Speaker
✎When Speaker Select External Speaker is set to , the
volume and buttons will not operate and the sound MUTE
settings will be limited.
✎When Speaker Select External Speaker is set to .
xTV Speaker: Off, : OnExternal Speaker
✎When Speaker Select is set to TV Speaker.
xTV Speaker: On, External Speaker: On
✎If there is no video signal, both speakers will be mute.
Visual Impaired
Digital channels only.
Adds verbal description to the main audio to help the visually
impaired.
Sound Reset
■
Reset All: Resets all sound settings to the factory defaults.
Channel Menu
Memorizing Channels
When you first set up your TV using , the TV Plug & Play
memorized the channels that were available over the air or through
your cable system and added them to the . The Channel List
Antenna Auto program and functions described below let you
re-run the channel memorization function without having to re-run
the procedure.Plug & Play
Antenna (Air / Cable)
Before your television can memorize the available channels, you
must select your TV's signal source, (using an antenna) or Air
Cable MENU Channel Antenna Air Cable. Select > > > or . After
you have selected the signal source, go on to the Auto Program
function.
✎Selecting the signal source using the function also Antenna
determines the signal source the TV is tuned to. For example,
if you receive your TV signal over the air, and you select
Cable, you will see only snow. You must select to see a Air
picture.
Auto Program
The function memorizes all channels that are Auto Program
available over the air or through your cable system and adds them
to the .Channel List
To start , follow these steps:Auto Program
1. Push MENU
m
→Channel →Auto Program →ENTER
E
on your remote. The Antenna Source screen appears.
2. On the Antenna Source screen, select the source of your TV
signal.
Boot Logo
Enable/disable displaying the logo while the TV starts up.
Eco Solution
■
Energy Saving (Off / Low / Medium / High / Picture Off) :
This adjust the brightness of the TV in order to reduce power
consumption. If you select Picture Off, the screen is turned
off, but the sound remains on. Press any button except volume
button to turn on the screen.
■
Eco Sensor (Off / On): To enhance your power savings; the
picture settings will automatically adapt to the light in the room.
✎If you adjust the , the will be set to Backlight Eco Sensor
Off.
Min. Backlight Eco Sensor On: When is , the minimum screen
brightness can be adjusted manually.
✎If is Eco Sensor On, the display brightness may change
(become slightly darker in most cases) depending on the
surrounding light intensity.
■
No Signal Power Off (Off / 15 min. / 30 min. / 60 min.): Sets
how quickly the TV switches to standby mode, if no picture is
being received.
✎Disabled when the PC is in power saving mode.
■
Auto Power Off (Off / On): The TV will be automatically turned
off when no user operation is received for 4 hours.
Auto Protection Time
■
Auto Protection Time (Off / 2 hours / 4 hours / 8 hours / 10
hours): If the screen remains idle with a still image for a certain
period of time you define, the screen saver is activated to prevent
the formation of ghost images on the screen.
Support Menu
Self Diagnosis
■
Picture Test: Use to check for picture problems. If the problem
appears in the test picture, select Yes and follow the directions
on the screen.
■
Sound Test: Use the built-in melody sound to check for sound
problems. If the problem occurs during the test, select Yes and
follow the directions on the screen.
■
Signal Strength: (Digital channels only) An HD channel’s
reception quality is either perfect or the channels are unavailable.
Adjust your antenna to increase signal strength.
■
Reset: Reset all settings to the factory defaults.
✎The PIN input screen appears before the setup screen.
✎Enter your 4-digit PIN. Change the PIN using the Change
PIN option.
Software Upgrade
Software Upgrade can be performed by downloading the latest
firmware from samsung.com to a USB memory device.
HD Connection Guide
Refer to this information when connecting external devices to the
TV.
Contact Samsung
View this information when your TV does not work properly or
when you want to upgrade the software. You can find information
regarding our call centers and how to download products and
software.
Media Play
Enjoy photos, music and/or movie files saved on a
USB Mass Storage Class (MSC) device.
MEDIA.P
Connecting a USB Device
1. Turn on your TV.
2. Connect a USB device containing photo, music, and/or movie
files to the USB jack on the back of the TV. A pop up window
appears.
3. Press the MEDIA.P button on your remote. The Media Play
menu appears.
Using the Media Play Menu
SUM
■
Change Device
E
Enter
R
Return
Media Play
Videos
To open in the Menu, follow these steps:Media Play
1. MENUPress the button. Then, press the or button to ▲ ▼
select on the left, and then press the Application ENTER
E
button.
2. Media Play (USB)Press the or button to select ▲ ▼ , and then
press the ENTER
E
button.
3. Videos, Music, Press the or button to select an icon (◄ ►
Photos, Settings), and then press the ENTER
E
button.
✎Media Play might not work properly with unlicensed
multimedia files.
✎Need-to-Know List before using Media Play (USB)
xThe file system supports FAT16, FAT32 and NTFS.
xCertain types of USB Digital camera and audio devices may not
be compatible with this TV.
xMedia Play only supports USB Mass Storage Class (MSC)
devices. MSC is a Mass Storage Class Bulk-Only Transport
device. Examples of MSC are Thumb drives and Flash Card
Readers. Devices should be connected directly to the TV’s USB
port. USB HDD is not supported.
xBefore connecting your device to the TV, please back up your
files to prevent them from damage or loss of data. SAMSUNG is
not responsible for any data file damage or data loss.
xA USB device that requires high power (more than 0.5A) may not
be supported.
xDo not disconnect the USB device while it is loading.
xThe higher the resolution of the image, the longer it takes to
display on the screen.
xThe maximum supported JPEG resolution is 15360 x 8640 pixels.
xIf a file is corrupted or the TV does not support the file type, the
“Not Supported File Format” message appears.
xThe TV cannot play MP3 files with DRM that have been
downloaded from a for-pay site. Digital Rights Management
(DRM) is a technology that supports the creation, distribution,
and management of digital content in an integrated and
comprehensive way, including protecting the rights and interests
of content providers, preventing illegal copying of contents, and
managing billing and settlements.
[UH4000-ZA]BN68-05829K-02ENG.indb 1 2014-09-16 9:11:13
Specyfikacje produktu
| Marka: | Samsung |
| Kategoria: | Telewizory LED |
| Model: | UN24H4000AF |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Samsung UN24H4000AF, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Telewizory LED Samsung
24 Lutego 2025
15 Stycznia 2025
13 Stycznia 2025
12 Stycznia 2025
14 Października 2024
13 Października 2024
12 Października 2024
11 Października 2024
10 Października 2024
10 Października 2024
Instrukcje Telewizory LED
- CHiQ
- TCL
- Toshiba
- Thomson
- Sharp
- Panasonic
- Hisense
- Philips
- Dual
- Audiosonic
- Changhong
- Manta
- Tokai
- Denver
- Schneider
Najnowsze instrukcje dla Telewizory LED
13 Lutego 2025
13 Lutego 2025
15 Stycznia 2025
15 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025
13 Stycznia 2025