Instrukcja obsลugi Scanstrut Flip Pro Duo SC-MULTI-F2
Scanstrut
Niesklasyfikowane
Flip Pro Duo SC-MULTI-F2
Przeczytaj poniลผej ๐ instrukcjฤ obsลugi w jฤzyku polskim dla Scanstrut Flip Pro Duo SC-MULTI-F2 (11 stron) w kategorii Niesklasyfikowane. Ta instrukcja byลa pomocna dla 15 osรณb i zostaลa oceniona przez 8 uลผytkownikรณw na ลrednio 4.6 gwiazdek
Strona 1/11
FLIP PRO DUO USB-A & USB-C WITH 12V POWER SOCKET
(SC-MULTI-F2)
04-10-2023 (Issue 1)
Installation Instructions
For further installation
and warranty information
please visit:
www.scanstrut.com
USA
+1 860 308 1416
usasales@scanstrut.com
UK & International
+44 (0)1392531280
sales@scanstrut.com
Draw a centre line to align template,
ensure line is square on surface and
correct orientation.
90ยฐ
TOP
1
Use drilling template to drill x2 ร32mm
(1 1/4โ) holes (see tools required).
ร32mm
(1.25โ)
3mm (0.11โ) Min
25mm (1โ) Max
2
Feed barrels through the gasket and
holes.
3
4
6
7
REAR INSTALL ONLY
Tighten lock rings onto product until
secure.
FRONT INSTALL ONLY
Push bezel onto the product, make sure the
bezel orientation is correct.
FRONT INSTALL ONLY
Apply silicone seal on ๎xings and pilot
holes.
Connect to 12V supply, ensuring a waterproof
connection. Fuse and select cable diameter
according to input voltage and current for your
speci๎c installation.
** If using a 24V system a voltage converter is
required on the 12V socket only**
Pilot Hole Size
Material No. 6 Screw
Soft Material e.g Plywood 2.5mm (3/32โ)
Hard Material e.g Fiberglass 3mm (1/8โ)
FRONT INSTALL ONLY
Drill 4 pilot holes for bezel.
5
TOP
32mm (1 1/4โ) Hole saw Drill
Front install only
Drill bit 2.5mm (3/32โ) or
3mm (1/8โ) Pozi screwdriver
Silicone
Tool list:
12V Socket & USB
charger Gasket Lock ring
Front install only
Front ๎t bezel
No.6x20mm
screws Screw cover
Parts list:
x1
x1
x1
x4
x2
x2
For latest tech info visit: www.scanstrut.com/USB
READ IMPORTANT SAFETY INFORMATION BEFORE INSTALLING.
Technical information:
USB Charger 12V Socket
Input
voltage
12/24V system
10-32V DC
12V system
10-15V DC
Input
current max
6A 10A
Output type
(12V system) (24V system)
12Vโ10A
USB-A USB-C USB-A USB-C
5Vโ3A,
9Vโ3A,
12Vโ3A
MAX
5Vโ3A,
9Vโ3A,
12Vโ3A
MAX
5Vโ3A,
9Vโ3A,
12Vโ3A
MAX
5Vโ3A,
9Vโ3A,
12Vโ3A
15Vโ3A,
20Vโ3A
MAX
Standby
draw
< 0.1W
Waterproof
rating
IPX4 front only lid closed
FLIP PRO DUO USB-A & USB-C WITH 12V POWER SOCKET
(SC-MULTI-F2)
04-10-2023 (Issue 1)
Installation Instructions
For further installation
and warranty information
please visit:
www.scanstrut.com
USA
+1 860 308 1416
usasales@scanstrut.com
UK & International
+44 (0)1392531280
sales@scanstrut.com
Draw a centre line to align template,
ensure line is square on surface and
correct orientation.
90ยฐ
TOP
1
Use drilling template to drill x2 ร32mm
(1 1/4โ) holes (see tools required).
ร32mm
(1.25โ)
3mm (0.11โ) Min
25mm (1โ) Max
2
Feed barrels through the gasket and
holes.
3
4
6
7
REAR INSTALL ONLY
Tighten lock rings onto product until
secure.
FRONT INSTALL ONLY
Push bezel onto the product, make sure the
bezel orientation is correct.
FRONT INSTALL ONLY
Apply silicone seal on ๎xings and pilot
holes.
Connect to 12V supply, ensuring a waterproof
connection. Fuse and select cable diameter
according to input voltage and current for your
speci๎c installation.
** If using a 24V system a voltage converter is
required on the 12V socket only**
Pilot Hole Size
Material No. 6 Screw
Soft Material e.g Plywood 2.5mm (3/32โ)
Hard Material e.g Fiberglass 3mm (1/8โ)
FRONT INSTALL ONLY
Drill 4 pilot holes for bezel.
5
TOP
32mm (1 1/4โ) Hole saw Drill
Front install only
Drill bit 2.5mm (3/32โ) or
3mm (1/8โ) Pozi screwdriver
Silicone
Tool list:
12V Socket & USB
charger Gasket Lock ring
Front install only
Front ๎t bezel
No.6x20mm
screws Screw cover
Parts list:
x1
x1
x1
x4
x2
x2
For latest tech info visit: www.scanstrut.com/USB
READ IMPORTANT SAFETY INFORMATION BEFORE INSTALLING.
Technical information:
USB Charger 12V Socket
Input
voltage
12/24V system
10-32V DC
12V system
10-15V DC
Input
current max
6A 10A
Output type
(12V system) (24V system)
12Vโ10A
USB-A USB-C USB-A USB-C
5Vโ3A,
9Vโ3A,
12Vโ3A
MAX
5Vโ3A,
9Vโ3A,
12Vโ3A
MAX
5Vโ3A,
9Vโ3A,
12Vโ3A
MAX
5Vโ3A,
9Vโ3A,
12Vโ3A
15Vโ3A,
20Vโ3A
MAX
Standby
draw
< 0.1W
Waterproof
rating
IPX4 front only lid closed
๎๎๎๎
๎๎๎๎๎๎๎๎๎๎ป๎ป๎ฝ๎ฎ๎๎๎๎
FLIP PRO DUO USB-A
&
USB-C WITH ๎2V POWER SOCKET
(SC-MULTI-F2)
Installation Instructions
Technical information:
๎๎บ๎ค๎บ๎ฆ๎๎๎ซ๎๎๎ซ๎บ
๎ฎ๎ก๎ฉ๎ณ๎ฐ๎บ ๎๎๎๎๎๎๎บ๎ฎ๎น๎ฎ๎ฑ๎๎๎บ
๎ต๎ฅ๎๎ฐ๎๎๎๎บ ๎๎๎๎๎๎๎บ๎จ๎ง๎บ
๎ฎ๎ก๎ฉ๎ณ๎ฐ๎บ
๎๎๎๎๎๎๎๎๎๎๎๎
๎๎ข๎บ
๎๎๎๎๎บ๎ฎ๎น๎ฎ๎ฑ๎๎๎๎บ ๎๎๎๎๎บ๎ฎ๎น๎ฎ๎ฑ๎๎๎๎บ
๎๎ป๎ฅ๎๎ข๎บ ๎๎ผ๎ฅ๎๎ง๎บ ๎๎ผ๎ฅ๎๎ข๎บ ๎๎ป๎ฅ๎๎ง๎บ
๎๎๎๎๎๎๎๎๎๎๎๎
๎๎๎๎๎ข๎๎บ
๎๎๎๎๎ข๎๎บ ๎๎๎๎๎ข๎๎บ ๎๎๎๎๎ข๎๎บ ๎๎๎๎๎ข๎๎บ
๎๎๎๎๎ข๎๎บ ๎๎๎๎๎ข๎๎บ ๎๎๎๎๎ข๎๎บ ๎๎๎๎๎๎ข๎บ
๎๎๎๎๎๎ข๎บ ๎๎๎๎๎๎ข๎บ ๎๎๎๎๎๎ข๎บ ๎๎๎๎๎๎ข๎๎บ
๎ณ๎ข๎๎บ ๎ณ๎ข๎๎บ ๎ณ๎ข๎๎บ ๎๎๎๎๎๎ข๎บ
๎ด๎ข๎๎บ
๎๎๎๎๎๎๎๎
๎ ๎๎๎๎
๎บ
๎๎๎๎๎
๎๎๎๎๎๎๎๎๎๎๎
๎ฏ๎ธ๎๎๎บ๎๎ฌ๎ฆ๎ข๎ฑ๎บ๎ฆ๎ข๎๎น๎บ๎๎๎๎บ๎๎๎ง๎ฎ๎๎๎บ
๎๎๎๎๎๎๎
๎๎
๎๎บ๎ช๎ฟ๎
๎ช๎
๎ฌ๎ฎ๎ถ๎ผ๎บ๎ฎ๎๎ด๎ฒ๎ถ๎ฎ๎๎ผ๎ท๎๎ช๎ด๎ฒ๎ฐ๎ถ๎๎ผ๎ฎ๎ต๎ธ๎ด๎ช๎ผ๎ฎ๎๎
๎ฎ๎ถ๎ป๎ฝ๎บ๎ฎ๎๎ด๎ฒ๎ถ๎ฎ๎๎ฒ๎ป๎๎ป๎น๎ฝ๎ช๎บ๎ฎ๎๎ท๎ถ๎๎ป๎ฝ๎บ๎ฏ๎ช๎ฌ๎ฎ๎๎ช๎ถ๎ญ๎
๎ฌ๎ท๎บ๎บ๎ฎ๎ฌ๎ผ๎๎ท๎บ๎ฒ๎ฎ๎ถ๎ผ๎ช๎ผ๎ฒ๎ท๎ถ๎๎
w
๎ ๎๎๎ ๎๎๎๎ก๎ฃ๎๎๎๎๎๎๎๎ง๎
๎ฉ๎
๎ข๎ฒ๎ฐ๎ฑ๎ผ๎ฎ๎ถ๎๎ด๎ท๎ฌ๎ณ๎๎บ๎ฒ๎ถ๎ฐ๎ป๎๎ท๎ถ๎ผ๎ท๎๎ธ๎บ๎ท๎ญ๎ฝ๎ฌ๎ผ๎๎ฝ๎ถ๎ผ๎ฒ๎ด๎
๎๎
๎๎ ๎๎๎ข๎๎๎๎ก๎ค๎๎๎๎๎๎๎ง๎
๎๎ธ๎ธ๎ด๎๎๎ป๎ฒ๎ด๎ฒ๎ฌ๎ท๎ถ๎ฎ๎๎ป๎ฎ๎ช๎ด๎๎ท๎ถ๎๎ฏ๎ฒ๎๎ฒ๎ถ๎ฐ๎ป๎๎ช๎ถ๎ญ๎๎ธ๎ฒ๎ด๎ท๎ผ๎
๎ฑ๎ท๎ด๎ฎ๎ป๎๎
๎๎๎
๎๎บ๎ค๎๎๎๎ฐ๎บ
๎๎๎๎บ๎ฎ๎น๎ฎ๎ฑ๎๎๎บ
๎๎๎๎๎๎๎บ๎ฉ๎ง๎บ
๎๎๎ข๎บ
๎๎๎๎๎๎๎ข๎บ
๎
๎น๎ช๎ข๎จ๎บ๎ฏ๎ณ๎ธ๎ท๎น๎พ๎ข๎ถ๎พ๎บ๎ป๎ข๎ซ๎ช๎ฟ๎บ๎ฏ๎ถ๎ซ๎ท๎น๎ด๎ข๎พ๎ฏ๎ท๎ถ๎บ๎ฅ๎ช๎ซ๎ท๎น๎ช๎บ๎ฏ๎ถ๎ป๎พ๎ข๎ฒ๎ฒ๎ฏ๎ถ๎ญ๎๎บ
๎
๎๎ท๎บ๎๎ด๎ช๎ผ๎ฎ๎ป๎ผ๎๎ผ๎ฎ๎ฌ๎ฑ๎๎ฒ๎ถ๎ฏ๎ท๎๎พ๎ฒ๎ป๎ฒ๎ผ๎๎๎ฟ๎ฟ๎ฟ๎๎ป๎ฌ๎ช๎ถ๎ป๎ผ๎บ๎ฝ๎ผ๎๎ฌ๎ท๎ต๎๎ฅ๎ก๎๎
๎๎
๎ฅ๎ป๎ฎ๎๎ญ๎บ๎ฒ๎ด๎ด๎ฒ๎ถ๎ฐ๎๎ผ๎ฎ๎ต๎ธ๎ด๎ช๎ผ๎ฎ๎๎ผ๎ท๎๎ญ๎บ๎ฒ๎ด๎ด๎๎๎๎๎๎๎๎ต๎ต๎
๎๎๎๎๎๎๎๎๎๎ฑ๎ท๎ด๎ฎ๎ป๎๎๎ป๎ฎ๎ฎ๎๎ผ๎ท๎ท๎ด๎ป๎๎บ๎ฎ๎น๎ฝ๎ฒ๎บ๎ฎ๎ญ๎๎๎
๎๎
๎๎ฎ๎ฎ๎ญ๎๎ซ๎ช๎บ๎บ๎ฎ๎ด๎ป๎๎ผ๎ฑ๎บ๎ท๎ฝ๎ฐ๎ฑ๎๎ผ๎ฑ๎ฎ๎๎ฐ๎ช๎ป๎ณ๎ฎ๎ผ๎๎ช๎ถ๎ญ๎
๎ฑ๎ท๎ด๎ฎ๎ป๎๎
๎๎๎๎บ๎๎๎๎๎๎บ๎๎๎บ๎ต๎๎ข๎บ
๎๎๎๎๎บ๎๎๎๎๎บ๎ด๎๎ธ
๎๎บ
๎
๎๎บ
'๏ฟฝ
E๏ฟฝ
E
๎
N
N
๎
.
Q๎
๎๎ ๎๎๎ข๎๎๎๎ก๎ฃ๎๎๎๎๎๎๎๎ง๎
๎๎ฝ๎ป๎ฑ๎๎ซ๎ฎ๎๎ฎ๎ด๎๎ท๎ถ๎ผ๎ท๎๎ผ๎ฑ๎ฎ๎๎ธ๎บ๎ท๎ญ๎ฝ๎ฌ๎ผ๎๎๎ต๎ช๎ณ๎ฎ๎๎ป๎ฝ๎บ๎ฎ๎๎ผ๎ฑ๎ฎ๎
๎ซ๎ฎ๎๎ฎ๎ด๎๎ท๎บ๎ฒ๎ฎ๎ถ๎ผ๎ช๎ผ๎ฒ๎ท๎ถ๎๎ฒ๎ป๎๎ฌ๎ท๎บ๎บ๎ฎ๎ฌ๎ผ๎๎
๎๎
๎๎ ๎๎๎ข๎๎๎๎ก๎ฃ๎๎๎๎๎๎๎๎ง๎
๎๎บ๎ฒ๎ด๎ด๎
๎๎
๎ธ๎ฒ๎ด๎ท๎ผ๎๎ฑ๎ท๎ด๎ฎ๎ป๎๎ฏ๎ท๎บ๎๎ซ๎ฎ๎๎ฎ๎ด๎๎
๎๎
๎๎ท๎ถ๎ถ๎ฎ๎ฌ๎ผ๎๎ผ๎ท๎๎๎๎ฆ๎๎ป๎ฝ๎ธ๎ธ๎ด๎๎๎๎ฎ๎ถ๎ป๎ฝ๎บ๎ฒ๎ถ๎ฐ๎
๎ช๎
๎ฟ๎ช๎ผ๎ฎ๎บ๎ธ๎บ๎ท๎ท๎ฏ๎
๎จ๎๎๎ฌ๎ท๎ถ๎ถ๎ฎ๎ฌ๎ผ๎ฒ๎ท๎ถ๎๎๎๎ฝ๎ป๎ฎ๎๎ช๎ถ๎ญ๎๎ป๎ฎ๎ด๎ฎ๎ฌ๎ผ๎๎ฌ๎ช๎ซ๎ด๎ฎ๎๎ญ๎ฒ๎ช๎ต๎ฎ๎ผ๎ฎ๎บ๎
๎ช๎ฌ๎ฌ๎ท๎บ๎ญ๎ฒ๎ถ๎ฐ๎๎ผ๎ท๎๎ฒ๎ถ๎ธ๎ฝ๎ผ๎๎พ๎ท๎ด๎ผ๎ช๎ฐ๎ฎ๎๎ช๎ถ๎ญ๎๎ฌ๎ฝ๎บ๎บ๎ฎ๎ถ๎ผ๎๎ฏ๎ท๎บ๎๎๎ท๎ฝ๎บ๎
๎ป๎ธ๎ฎ๎ฌ๎ฒ๎ฏ๎ฒ๎ฌ๎๎ฒ๎ถ๎ป๎ผ๎ช๎ด๎ด๎ช๎ผ๎ฒ๎ท๎ถ๎๎
๎
๎
๎๎๎ฏ๎๎ฝ๎ป๎ฒ๎ถ๎ฐ๎
๎ช๎
๎๎๎ฆ๎๎ป๎๎ป๎ผ๎ฎ๎ต๎
๎ช๎
๎พ๎ท๎ด๎ผ๎ช๎ฐ๎ฎ๎๎ฌ๎ท๎ถ๎พ๎ฎ๎บ๎ผ๎ฎ๎บ๎๎ฒ๎ป๎
๎บ๎ฎ๎น๎ฝ๎ฒ๎บ๎ฎ๎ญ๎๎ท๎ถ๎๎ผ๎ฑ๎ฎ๎๎๎๎ฆ๎๎ป๎ท๎ฌ๎ณ๎ฎ๎ผ๎๎ท๎ถ๎ด๎๎
๎
๎
๎
๎๎๎๎๎๎
+
๎๎ก๎ฃ๎ฅ๎ช๎ฏ ๎๎ฅ๎ฃ๎๎ฏ๎๎ก๎ฎ๎๎ฏ
๎๎๎ช๎๎จ๎ก๎๎ฃ๎ฏ ๎๎ฅ๎
๎ฏ
๎๎ฏ
๎๎๎ฆ๎๎ฌ๎ฏ
๎๎ฅ๎๎ซ๎ฏ๎๎๎ช๎๎ง๎ก๎๎ฃ๎ฏ๎๎
๎๎ฏ๎๎ฃ๎ญ๎ฅ๎ฅ๎๎ฏ ๎๎
๎๎ค๎ค๎ฏ๎๎๎๎๎๎ฏ
๎๎๎ฆ๎๎ฏ๎๎๎ช๎๎ฆ๎ข๎๎ฃ๎ฏ๎๎
๎ ๎ฏ๎๎ก๎๎๎ง๎๎ฃ๎๎ฉ๎ฉ๎ฏ ๎๎ค๎ค๎ฏ๎๎๎๎๎๎๎ฏ
๎ฌ๎จ๎ฌ๎บ๎๎ด๎ฌ๎ฒ๎๎๎ฌ๎บ๎๎ฃ๎ฏ๎ฒ๎๎๎๎๎ฒ๎๎จ๎ฃ๎บ
๎๎ฑ๎บ
๎๎บ
๎ฐ๎ฃ๎ฒ๎๎ฌ๎ฃ๎๎ฒ๎๎จ๎ฃ๎๎๎บ
๎
๎๎๎บ๎๎๎๎๎๎๎๎๎๎๎๎๎๎บ
๎ฏ๎๎๎๎ฏ๎ก๎ฏ๎๎๎ฃ๎ฏ๎ฒ๎ฌ๎ด๎ฒ๎๎๎จ๎ญ๎บ
๎๎ฃ๎๎บ๎ท๎๎ฌ๎ฌ๎๎ฃ๎ฒ๎น๎บ๎๎ฃ๎๎จ๎ฌ๎ ๎๎ฒ๎๎จ๎ฃ๎บ
๎๎ฝ๎ฃ๎บ
๎ช๎๎๎๎ฏ๎๎บ๎ถ๎๎ฏ๎๎ฒ๎๎บ
๎
๎บ
๎๎บ
๎๎๎๎บ๎๎๎๎บ๎๎๎๎๎บ
๎ท๎ท๎ท๎๎ฏ๎๎๎ฃ๎ฏ๎ฒ๎ฌ๎ด๎ฒ๎๎๎จ๎ ๎บ
๎ด๎ฏ๎๎ฏ๎๎๎๎ฏ๎ก๎ฏ๎๎๎ฃ๎ฏ๎ฒ๎ฌ๎ด๎ฒ๎๎๎จ๎ ๎บ
S๎๎R๎
Specyfikacje produktu
| Marka: | Scanstrut |
| Kategoria: | Niesklasyfikowane |
| Model: | Flip Pro Duo SC-MULTI-F2 |
Potrzebujesz pomocy?
Jeลli potrzebujesz pomocy z Scanstrut Flip Pro Duo SC-MULTI-F2, zadaj pytanie poniลผej, a inni uลผytkownicy Ci odpowiedzฤ
Instrukcje Niesklasyfikowane Scanstrut
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
28 Stycznia 2025
Instrukcje Niesklasyfikowane
- Crazy Tube Circuits
- Avaya
- Nuna
- ProLights
- Phonic
- Goki
- Hosa
- Alphatronics
- TRIUS
- MoFi
- HPI Racing
- Genius
- Megarevo
- Key Digital
- Bretford
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025