Instrukcja obsługi Scosche SAVW-6

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Scosche SAVW-6 (1 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 15 osób i została oceniona przez 4 użytkowników na średnio 4.9 gwiazdek

1.If the vehicle's mounting holes do not align with the bracket's mounting holes, use the

adapter bracket (with located at the top) as a template to mark and drill slot

mounting holes securing speaker to adapter bracket as shown here. before

2.Place supplied speed clips over mounting holes with the flat sides out.

3.Connect speaker wires to new speaker. Feed wires through slotin top of bracket.

Secure speaker to bracket using hardware supplied and connect wires to

vehicle speaker wires.

Speaker Adapter Bracket

142 SAVW6

Parts

Supplied:

4

(2) Brackets(8) Phillips

Screws

Revision 06/18/2025

*142SAVW6*

(8) Speed

Clips

Always be careful when drilling in a vehicle. WEAR EYE

PROTECTION. Be aware of things such as wiring, windows,

fuel lines and safety devices. Check drilling depth and

location to avoid damage to vehicle appearance.

CAUTION

!

Copyright 2025 Crutchfield Corporation

IMPORTANT

Before starting, compare items on your invoice with items

received. Thoroughly check packing materials. If an item

is missing, please call Crutchfield at 1-888-955-6000.

(8) Nuts(8) Washers

(8) Cinch

Screws

Slot

(for wires)

Drill new mounting holes

and place speed clips

over holes.

Tools Required

Phillips

Screwdriver

Drill &

1/8” Bit

1/4" Wrench

4

Specyfikacje produktu