Instrukcja obsługi Sencor SCS WA1003

Sencor subwoofer SCS WA1003

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sencor SCS WA1003 (4 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2.5 użytkowników na średnio 4.9 gwiazdek

Pobierz PDF

Strona 1/4

SCS WA1003

ACTIVE SUBWOOFER

AKTIVNÍ SUBWOOFER

AKTÍVNY HLBOKOTÓNOVÝ

REPRODUKTOR

AKTÍV MÉLYSUGÁRZÓ

SUBWOOFER AKTYWNY

USER‘S MANUAL

NÁVOD K OBSLUZE

NÁVOD NA OBSLUHU

FELHASZNÁLÓI KÉZIKÖNYV

INSTRUKCJA OBSŁUGI

EN-1

SPECIFICATIONS

Warning:

Don‘t put the machine in the rain or the

mist in case of lightning and re.

Attention: Don‘t block the hole of ventilati-

on or put objects on the machine.

Attention: Leave some space around

the machine in order to be ventilated.

10“ Subwoofer Box

Max. peak Power: 400 W

Max. RMS Power: 120 W

Frequency range (L.P.F.): 50 Hz ~ 250 Hz

(± 2 dB)

Variable LOW Pass Filter

Input sensitivity: 0,2 V ~ 6 V

Speaker impedance: 4 Ohms

Plastic Grill Cover

Dimensions: 45×30,6×28,8 cm

Fuse 30 A

SYSTEM WIRING DIAGRAM

1. Connection of Power Cord

 Since this unit deals with a high

power, large current will ow and the

wiring of the power cord is high impor-

tance.



Connect the red conductor directly

to the (+) battery terminal using the

cable with the fuse holder.



Connect the black wire tightly to

an appropriate screw on the metal

part of car after removing paint for

proper grounding. Be sure to use the

screw not to bring danger for driving.



Proper connection will provide clear

sound.

2. Connection of Remote ON/OFF Wire



Connect the conductor to the swit-

ching output. After connecting to this

device, you will be able to turn it on

and off together with the car radio.

You will nd the switching power

cable next to the car‘s radio antenna

connection.

Note: It is not possible to turn on the

subwoofer without connecting the

REM terminal!

3. Connection of Aux Input (Low Input)



Connect Aux input wires with RCA

type pin jack as follows:

WHITE to L ch pre-input of the car

stereo

RED to R ch of the car stereo

4. Input sensitivity control

 Adjust the input sensitivity to output

of a car stereo connected.

The original version is in the Czech language.

Address of the manufacturer: FAST ČR, a.s., Černokostelecká 1621, CZ-251 01 Říčany

EN-2

WIRING OPERATION

EN Disposal of Used Electrical & Electronic Equipment

The meaning of the symbol on the product, its accessory or packaging indicates that

this product shall not be treated as household waste. Please, dispose of this equi-

pment at your applicable collection point for the recycling of electrical & electronic

equipments waste. In the European Union and Other European countries which there

are separate collection systems for used electrical and electronic product. By ensu-

ring the correct disposal of this product, you will help prevent potentially hazardous to the envi-

ronment and to human health, which could otherwise be caused by unsuitable waste handling

of this product. The recycling of materials will help conserve natural resources. Please do not

therefore dispose of your old electrical and electronic equipment with your household waste.

For more detailed information about recycling of this product, please contact your local city

ofce, your household waste disposal service or the shop where you purchased the product.

EN: Changes in text and technical parameters reserved.

Specyfikacje produktu

Marka:	Sencor
Kategoria:	subwoofer
Model:	SCS WA1003
Kolor produktu:	Czarny
Impedancja:	4 Ω
Moc RMS głośnika niskotonowego:	120 W
Pasmo przenoszenia subwoofera:	40 - 3000 Hz
Średnica głośników subwoofera:	250 mm
Typ głośnika niskotonowego:	Subwoofer aktywny
Szerokość głośnika niskotonowego:	450 mm
Głebokość głośnika niskotonowego:	306 mm
Wysokość głośnika niskotonowego:	288 mm
Ciężar głośnika niskotonowego:	6700 g
Filtr dolnoprzepustowy:	Tak
Moc szczytowa subwoofera:	400 W
Wejścia liniowe (RCA):	1
Zakres filtru dolnoprzepustowego:	50 - 250 Hz
Przesunięcie fazowe:	0 - 180 °