Instrukcja obsługi Sevenoak SK-LM7
Sevenoak
nieskategoryzowany
SK-LM7
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sevenoak SK-LM7 (1 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 4.4 gwiazdek
Strona 1/1

SK-LM7
7”On-camera monitor
Before using the product,please read this manual carefully.
Keep this manual safety in case you need to check during your usage.
Operate this product on base of your full understand of this manual.
Specifications subject to change without notice.
For more information,please visit www.sevenoak.biz
Standard shoe adapter *1
US standard Battery charger
7” monitor
HDMI cable
Sun shade
Manual
Attach the shoe adapter to the 1/4” screw hole
at the bottom of the monitor and lock it by rotating
the adapter clockwise.
Screw A: Shoe adapter and monitor locking screw, rotate it clockwise
to lock the shoe adapter and monitor.
Screw B: Angle adjusting screw, rotate it clockwise to lock, anti-
clockwise to loose.
Screw C: Shoe adapter locking screw, rotate it anti-clockwise to lock
and clock wise to loose.
Compatible battery: Sony NP-F550, NP-F570, NP-F330, NP-F530.
Push the batttery gently as the direction shown in the picture, slide it down till the
click, the battery is fixed into place.To release the battery, slide the battery out.
Slider down to install
the battery
Battery installed
properly
Insert the sun shade to the left and right
buckle kit, make sure the sun shade is fixed
properly.
After attaching the shoe adapter to the monitor, mount the shoe adapter to the camera hot shoe,
then lock the shoe adapter by rotating the shoe adapter locking screw C.
Loosen angle adjusting screw B, users
can adjust the monitor to a desired
position,then lock the angle adjusting
screw.
Power supply:
1. Compatible Sony battery
2. DC power supply, supports US standard adapter and Europe
standard adapter.
Battery charge:
1. Use Sony battery charger
2. Use the power adapter to supplement the battery charge
① Power indicator:
Green: working state
Red: standby
② Power on/o
Press it turn on the monitor,
Press it again to turn o the monitor
③ Input selection switch
HDMI/video1/video2/YPbPr
④ Left button: Press it to move left a menu page
⑤ Up button: Press it to move up a menu item
⑥ Menu/Enter button: Press it to show menu, or confirm
a menu item
⑦ Down button: Press it to move down a menu item
⑧ Right button: Press it to move right a menu page
⑨ Component Y jack
⑩ Component Pb jack
⑪ Component Pr jack
⑫ HDMI jack
⑬ Video 1 input
⑭ Video 2 input
① ② ③ ④⑤
⑥
⑦ ⑧
⑨
⑩
⑪
⑫
⑬
⑭
■ Please read and follow these instructions, and keep this
manual in a safe place.
■ Handle the unit with care.
■ Clean the unit with a soft, dry cloth.
■ Use only parts provided by the manufacturer.
■ Make sure everything is secure before proceeding.
■ Make sure the item is intact and that there are no
missing parts.
■ All photos are for illustrative purposes only.
Sevenoak provides a limited warranty that this product is free
from defects in materials and workmanship to the original
purchaser under normal use for a period of one (1) year from
the original purchase date or thirty (30) days after replacement
(the “Warranty Period”), whichever occurs later. Our responsibility
with respect to this limited warranty shall be limited solely to
repair or replacement, at its option, of any product which fails
during normal consumer use.
To obtain warranty coverage during the Warranty period,
contact your place of purchase (”Seller”) to obtain a return
merchandise authorization (”RMA”) number, and return to
Seller the defective product along with proof of purchase and
the RMA number.
This warranty does not extend to damage or failure which results
from misuse, neglect, accident, alternation, abuse, improper
installation or maintenance. EXCEPT AS PROVIDED HEREIN,
SEVENOAK MAKES NEITHER ANY EXPRESS WARRANTIES
NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT
LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE. This warranty
provides you with specific legal rights, and you may also have
additional rights which vary from state to state.
Install the battery/DC power supply, the LED indicator turns to Red,
Press button, the monitor is power-on, the LED indicator turns
to green. Press the the power switch for 2 seconds , the LED
indicator turns to Red, the monitor is power-o.
When the monitor is on, press the input signal selection button, enter
into the input signal selection menu: YPbPr, HDMI, Video 1 or Video 2.
Press up/down button to select the input signal, then press button
to confirm.
Before setting the menu functions, please make sure the device is
connected correctly. Turn the power (lower right corner of the unit)
dial to ON position.The monitor enters into working state. After
enter into working state, press the button on the unit, according
to select input video signal to switch “YPbPr, HDMI,Video 1,Video 2”
(under NO menu state, using the shortcut button on the panel to
operate). Press button on the unit, then enter into OSD menu
operation. Press or to move left or right a menu page (Picture/
Sound/Time/Options).
After selecting a menu page, press or to select menu
item, presss to enter into submenu, using or to Change the
value of the selected menu item, then press M to confirm. If you need
to exit OSD menu, press button again.
Picture
1.Picture Mode: Standard (default), Mild, User, Dynamic
2.Color Temperature: Medium (default), Warm, User, Cool
3.Aspect Ratio: Auto (default), 4:3, 16:9, Zoom1, Zoom2, Just scan
(Panorama)
4.Noise Reduction: O, low, Middle, High, Default (default)
5.Back light: 0-100
Sound
Not applicable
Time
1. Clock: Date, Month, Year, Hour, Minute
2. O time: O (default), Once, Every day, Monday to Friday, Monday
to Saturday, Saturday to Sunday, Sunday
3. On time: O (default), Once, Every day, Monday to Friday, Monday t
o Saturday, Saturday to Sunday, Sunday
4. Sleep time: O (default), 10min, 20min, 30min, 60min, 90min,120min,
180min,240min
5. Auto sleep: On, O (default)
Option
1. OSD language: Multi-language is optional, Default is English
2. Color range: 0-255 (Default), 16-235
3. Blending low: O, Low, Middle,, High (default)
4. OSD duration: O, 5sec, 10sec, 15sec
Other options are not aplicable in this product.
Model No. SK-LM7 Power supply
Screen 7” IPS TFT-
LCD Language
Aspect ratio 16:9/4:3/etc Input power
voltage range
Resolution
(WVGA) 800*480 Total current 250mA
Brightness 400cd/ m Power
consumption 3W
Viewing
Angle 50/70/70/70 Input signal HDMI YPbPr、 、
Video1 Video2、
Weight 400g
Size (LWH) 192mm*150mm
*25mm
DV 9V
Multilanguage
Lithium battery
or DC adapter
2016 Sevenoak lnc.Visit us on the
web at www.sevenoak.biz
Components Install the shoe adapter
Attaching to the camera Power supply
Identifying the parts
Install the battery Install the sun shade
Limited One-year Warranty Warnings
On/o
Select input signal
Menu operating instruction
Menu operating instruction Menu operating instruction Specifications
Specyfikacje produktu
Marka: | Sevenoak |
Kategoria: | nieskategoryzowany |
Model: | SK-LM7 |
Kolor produktu: | Niebieski |
Typ wyświetlacza: | OLED |
Wysokość produktu: | 11 mm |
Szerokość produktu: | 146.2 mm |
Głębokość produktu: | 161.3 mm |
Waga produktu: | 300 g |
Szerokość opakowania: | 198 mm |
Wysokość opakowania: | 63.5 mm |
Głębokość opakowania: | 228.5 mm |
Bluetooth: | Tak |
Wersja Bluetooth: | 5.0 |
Prąd: | 0.25 A |
Port USB: | Tak |
Obsługiwany typ USB: | USB Type-C |
Maksymalne zużycie mocy: | 3 W |
Zasilacz sieciowy: | Tak |
GPS: | Tak |
Pojemność baterii: | 4500 mAh |
Długość przekątnej ekranu: | 6.6 " |
Obsługiwane typy kart pamięci: | Nano Memory (NM) |
Maksymalny rozmiar karty pamięci: | 256 GB |
Pojemność pamięci wewnętrznej: | 512 GB |
Układ: | Muszla |
Rozdzielczość: | 2480 x 1148 px |
Typ ekranu dotykowego: | Pojemnościowy |
Technologia dotyku: | Multi-touch |
Ekran dotykowy: | Tak |
Czujnik orientacji: | Tak |
Czujnik zbliżeniowy: | Tak |
Akcelerometr: | Tak |
Czujnik oświetlenia otoczenia: | Tak |
Taktowanie procesora: | 2.86 GHz |
Typ procesora: | Hi-Silicon |
Model procesora: | Kirin 990 |
Typ aparatu tylnego: | Quad kamera |
Lampa błyskowa z tyłu aparatu: | Tak |
Automatyczne ustawienie ostrości: | Tak |
Rozdzielczość kamery tylna (numericky): | 40 MP |
Rozdzielczość drugiego aparatu tylnego (numeryczna): | 16 MP |
Rozdzielczość trzeciej tylnej kamery (numeryczna): | 8 MP |
Liczba przesłon aparatu tylnego: | 1.8 |
Liczba przesłon drugiego aparatu tylnego: | 2.2 |
Jasność obiektywu trzeciej tylnej kamery: | 2.4 |
Rozdzielczość kamery przedniej: | - MP |
Rozdzielczość wideo: | - px |
Obsługa kart SIM: | Dual SIM |
Wi-Fi: | Tak |
Typ karty SIM: | NanoSIM |
Standardy 2G: | GSM |
Standardy 3G: | WCDMA |
Standardy 4G: | LTE-TDD & LTE-FDD |
Standardy Wi- Fi: | 802.11a,802.11b,802.11g,Wi-Fi 4 (802.11n),Wi-Fi 5 (802.11ac) |
Wiązanie (tryb modemu): | Tak |
Generacja sieci mobilnej: | 5G |
Rodzaj abonamentu: | Brak subskrypcji |
SMS: | Tak |
MMS: | Tak |
Komunikator internetowy (IM): | Tak |
Rozmowa: | Tak |
E-mail: | Tak |
Czytnik linii papilarnych: | Tak |
Szybkie ładowanie: | Tak |
Karta graficzna: | Mali-G76 |
Lokalizacja pozycji: | Tak |
Funkcja Assisted GPS (A-GPS): | Tak |
GLONASS: | Tak |
BeiDou: | Tak |
Elektryczny kompas: | Tak |
Obsługiwane formaty audio: | 3GP,AAC,AMR,FLAC,MIDI,MP3,MP4,OGG,WAV |
Obsługiwane formaty plików wideo: | 3GP,MP4 |
Platforma: | Android |
Platforma dystrybucji aplikacji: | Huawei AppGallery |
Czas rozmowy (3G): | - h |
Czas wygaszacza (3G): | 210.9 h |
Skrócona instrukcja obsługi: | Tak |
Przewody: | USB Type-C |
Wyrzutnik karty SIM: | Tak |
Bluetooth Low Energy (BLE): | Tak |
Waga wraz z opakowaniem: | 1063 g |
Napięcie: | 9 V |
Liczba rdzeni procesora: | 8 |
Zainstalowany system operacyjny: | Android 10.0 |
Ilość portów HDMI: | 1 |
NFC: | Tak |
Technologia wyświetlacza: | LCD |
Kształt ekranu: | Płaski |
Kolory wyświetlacza: | 16.78 millionów kolorów |
Typ zasilacza: | Bateria/DC |
Jasność: | 400 cd/m² |
Nazwa koloru: | Interstellar Blue |
Żyroskop: | Tak |
Moc adaptera AC: | 55 W |
Pasmo 2G (podstawowy SIM): | 850,900,1800,1900 Mhz |
Wersja USB: | 3.2 Gen 1 (3.1 Gen 1) |
Zestaw słuchawkowy w zestawie: | Tak |
Galileo: | Tak |
Widelec systemu operacyjnego: | EMUI 10.0.1 |
Futerał ochronny: | Tak |
Stabilizator obrazu: | Tak |
Architektura procesora: | ARM Cortex-A76+Cortex-A55 |
Czas rozmów (4G): | 9.8 h |
Drugi ekran LCD: | Tak |
Format obrazu: | 4:3, 16:9 |
Wsparcie USB on-the-go: | Tak |
System satelitarny Quasi-Zenith (QZSS): | Tak |
Litografia procesora: | 7 nm |
Barometr: | Tak |
Szerokość po złożeniu: | 78.5 mm |
Głębokość po złożeniu: | 161.3 mm |
Wysokość po złożeniu: | 11 mm |
Pasmo 2G (wtórny SIM): | 850,900,1800,1900 Mhz |
Przekątna ekranu (rozłożony): | 8 " |
Czujnik Halla: | Tak |
Architektura 64-bitowa: | Tak |
Czujnik podczerwieni: | Tak |
Drugi typ wyświetlacza: | OLED |
Przekątna drugiego ekranu: | 6.38 " |
Rozdzielczość drugiego ekranu: | 2480 x 892 px |
Rozdzielczość wyświetlacza (rozłożona): | 2480 x 2200 px |
Czujnik temperatury kolorów: | Tak |
Częstotliwości rdzeni: | 2x Cortex-A76 2.86GHz + 2x Cortex-A76 2.36GHz + 4x Cortex-A55 1.95GHz |
Usługi mobilne Huawei (HMS): | Tak |
Tylna kamera głębi 3D: | Tak |
Czas rozmowy (5G): | 9.2 h |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Sevenoak SK-LM7, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje nieskategoryzowany Sevenoak
9 Sierpnia 2024
9 Sierpnia 2024
9 Sierpnia 2024
18 Czerwca 2024
Instrukcje nieskategoryzowany
- nieskategoryzowany Nubert
- nieskategoryzowany Tenda
- nieskategoryzowany Atomos
- nieskategoryzowany 8BitDo
- nieskategoryzowany Digitus
- nieskategoryzowany Inface
- nieskategoryzowany Dyson
- nieskategoryzowany Emko
- nieskategoryzowany Crosley
- nieskategoryzowany Electro-Voice
- nieskategoryzowany Enhance
- nieskategoryzowany Chandler
- nieskategoryzowany Testboy
- nieskategoryzowany EGO
- nieskategoryzowany AMX
Najnowsze instrukcje dla nieskategoryzowany
28 Października 2024
28 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024