Instrukcja obsługi Siemens OpenStage 40

Siemens telefon OpenStage 40

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Siemens OpenStage 40 (49 stron) w kategorii telefon. Ta instrukcja była pomocna dla 40 osób i została oceniona przez 20.5 użytkowników na średnio 4.3 gwiazdek

Pobierz PDF

Strona 1/49

Communication for the open minded

Siemens Enterprise Communications

www.siemens.com/open

Documentation

HiPath 8000

OpenStage 40 OpenStage 40 G

OpenStage Key Module 40

Operating Manual

Important information

Trademarks

For safety reasons, the telephone should only be supplied

with power:

• using the original power supply unit.

Part number: C39280-Z4-C51x (x: 0=EU, 1=US, 2=UK)

• in a LAN with PoE (Power over Ethernet), which com-

plies with the IEEE 802.3af standard.

Use only original Siemens accessories. The use of other ac-

cessories may be hazardous and will render the warranty

and the CE marking invalid.

Never open the telephone or a key module. Should you en-

counter any problems, contact the responsible administra-

tor.

The device conforms to the EU directive 1999/5/EC as at-

tested by the CE marking.

All electrical and electronic products should be disposed of

separately from the municipal waste stream via designated

collection facilities appointed by the government or the lo-

cal authorities.

Proper disposal and separate collection of your old appli-

ance will help prevent potential damage to the environment

and human health. It is a prerequisite for reuse and recy-

cling of used electrical and electronic equipment.

For more detailed information about disposal of your old ap-

pliance, please contact your city office, waste disposal ser-

vice, the shop where you purchased the product or your

sales representative.

The statements quoted above are only fully valid for equip-

ment which is installed and sold in the countries of the Eu-

ropean Union and is covered by the directive 2002/96/EC.

Countries outside the European Union may impose other

regulations regarding the disposal of electrical and electron-

ic equipment.

Important information

Location of the telephone

• The telephone should be operated in a controlled environment with an

ambient temperature between 5°C and 40°C.

• To ensure good speakerphone quality, the area in front of the micro-

phone (front right) should be kept clear. The optimum speakerphone

distance is 50 cm.

• Do not install the telephone in a room where large quantities of dust

accumulate; this can considerably reduce the service life of the tele-

phone.

• Do not expose the telephone to direct sunlight or any other source of

heat, as this is liable to damage the electronic components and the

plastic casing.

• Do not operate the telephone in damp environments such as bath-

rooms.

Online documentation

This and other documentation can be found on the Internet at:

http://www.enterprise-communications.siemens.com > Products

> Phones & Clients > (select product) > Downloads.

To view and print documentation in PDF format, you require

Acrobat Reader (free software):

http://www.adobe.com

Technical notes, current information about firmware updates, frequently

asked questions and lots more can be found on the Internet at:

http://wiki.siemens-enterprise.com/

Specyfikacje produktu

Marka:	Siemens
Kategoria:	telefon
Model:	OpenStage 40
Kolor produktu:	Grey, White
Typ produktu:	IP Phone
Waga produktu:	1068 g
Gniazdko wyjścia DC:	Tak
Typ ekranu:	LCD
Pełny dupleks:	Tak
Ilość portów Ethernet LAN (RJ-45):	1
Obsługa PoE:	Tak
Zakres temperatur (eksploatacja):	5 - 40 °C
Rozdzielczość:	240 x 128 px
Możliwośc rozmowy konferencyjnej:	Tak
Zakres temperatur (przechowywanie):	-40 - 70 °C
Wymiary produktu (SxGxW):	270 x 220 x 70 mm
Kodeki glosu:	G.711, G.722, G.729
Redukcja hałasu:	Tak
Montaż naścienny / rzutowanie na sufit:	Tak
Typ montażu:	Biurko / Ściana
Pojemność książki telefonicznej:	- wejścia