Instrukcja obsługi Sigma BUSTER 1600
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sigma BUSTER 1600 (4 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 23 osób i została oceniona przez 12 użytkowników na średnio 4.9 gwiazdek
                        Strona 1/4
                    
                    
                    
* Basis ANSI Nema FL1
≤ 50h
SAFE
IPX4
≤ 205m
*
USB-C
FAST CHARGING
This device complies with Part 15 of the FCC Rules. 
Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and (2) This device must accept any inter-
ference received, including interference that may cause undesired operation. The grantee is not 
responsible for any changes or modifi cations not expressly approved by the party responsible 
for compliance. Such modifi cations could void the user’s authority to operate the equipment.
This equipment should be installed and operated with a minimum distance of 
5 millimeters between the radiator and your body.
NOTE: 
This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment generates, 
uses and can radiate radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. However, there is 
no guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning 
the equipment off and on, the user is encouraged to try to correct the interference by one or 
more of the following measures: 
− Reorient or relocate the receiving antenna. 
− Increase the separation between the equipment and receiver.
− Connect the equipment into an outlet on a circuit different from that to which the receiver 
   is connected. 
− Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Any changes or modifi cations not expressly approved by the party responsible for compliance 
could void the user’s authority to operate this equipment. 
Radiation Exposure Statement:
The product comply with the FCC portable RF exposure limit set forth for an uncontrolled 
environment and are safe for intended operation as described in this manual. The further RF 
exposure reduction can be achieved if the product can be kept as far as possible from the user 
body or set the device to lower output power if such function is available.
CE INFORMATION
FCC DECLARATION OF CONFORMITY
SP1
WAARSCHUWING / AVERTISSEMENT / AVVERTENZA / ADVERTENCIA !
NL
  Mogelijk gevaarlijke optische straling! Kijk bij gebruik nooit direct 
  in de lamp of richt deze nooit op de ogen van andere personen.
De verdere veiligheidsinstructies in het bijgevoegde blad, vooral met 
  betrekking tot het veilige gebruik van de verlichting, moeten absoluut 
  in acht worden genomen.
FR
  Le rayonnement émis peut être dangereux! Ne jamais regarder 
  l‘éclairage pendant son fonctionnement et ne jamais l‘orienter 
  dans les yeux d‘autres personnes. Respecter impérativement les autres consignes de 
  sécurité fi gurant sur la feuille jointe, en particulier pour une utilisation sûre de l‘éclairage.
IT
  Radiazioni ottiche potenzialmente pericolose! Non guardare mai direttamente nel fanale 
  quando è in funzione o non puntarlo mai sugli occhi di altre persone. È indispensabile 
  osservare le ulteriori istruzioni di sicurezza riportate nel foglio allegato, in particolare 
  per quanto riguarda l‘uso sicuro dell‘illuminazione.
ES
  ¡Riesgo de radiación nociva! Nunca mires directamente al faro encendido, ni lo orientes 
  hacia los ojos de otras personas. Es imprescindible respetar las demás instrucciones de 
  seguridad que fi guran en la hoja adjunta, especialmente en lo que se refi ere al uso seguro 
  de la iluminación.
189731/2
Designed in Germany
Manufactured in China
SIGMA-ELEKTRO GmbH
Dr.-Julius-Leber-Straße 15
67433 Neustadt / Weinstraße
Germany 
kundenservice@sigmasport.com
3 mm
EN
  SIGMA-ELEKTRO GmbH hereby declares that the BUSTER 1600/HL comply with the 
  fundamental requirements and other relevant regulations of Directive 2014/30/EU 
  and RoHS Directive 2011/65/EU. You can fi nd the CE declaration at: 
  ce.sigmasport.com/buster1600, ce.sigmasport.com/buster1600hl
DE
  Hiermit erklärt SIGMA-ELEKTRO GmbH, dass sich die BUSTER 1600/HL 
  in Übereinstimmung mit den grundlegenden Anforderungen und den anderen 
  relevanten Vorschriften der Richtlinie 2014/30/EU und RoHS Directive 2011/65/EU 
  befi nden. Sie fi nden die Konformitäts-Erklärung unter folgendem Link: 
  ce.sigmasport.com/buster1600, ce.sigmasport.com/buster1600hl
FR
  Vous trouverez la déclaration CE à l’adresse : ce.sigmasport.com/buster1600, 
  ce.sigmasport.com/buster1600hl
IT
  La dichiarazione CE è disponibile all‘indirizzo: ce.sigmasport.com/buster1600,
  ce.sigmasport.com/buster1600hl
ES
  Puede encontrar la declaración de conformidad CE en: ce.sigmasport.com/buster1600,
  ce.sigmasport.com/buster1600hl
NL
  U kunt de CE-certifi cering vinden op: ce.sigmasport.com/buster1600, 
  ce.sigmasport.com/buster1600hl
We, SIGMA-ELEKTRO GmbH, declare that 
the equipment above has been tested in 
our facility and found compliance with the 
requirement limits of applicable standards, 
in accordance with the Electromagnetic 
Compatibility Regulations 2016 and the 
Restriction of the Use of Certain Hazardous 
Substances in Electrical and Electronic 
Equipment Regulations 2012. The test 
record, data evaluation and Equipment 
Under Test (EUT) confi gurations represented 
herein are true and accurate under the 
standards herein specifi ed.
UKCA STATEMENT
MONTAGE-OPTIE 
/
OPTIONS DE MONTAGE
/OPZIONE DI MONTAGGIO /
OPCIONES DE MONTAJE
~4 cm
1
4
3
2
1
3
1
2
3
2
MONTAGE / MONTAGGIO /MONTAGE / MONTAJE
1
2
VIDEO 
TUTORIALS
goto.sigmasport.com/
busterhelmet/video
NL
Met   klittenbandeen
  Optimale montagemogelijkheid voor helmen 
  met parallel gerangschikte ventilatie-openingen. 
FR Avec   bande Velcroune
  Possibilité de montage optimale sur les casque 
  dotés d‘ouvertures d‘aération parallèles.
IT Con fascia di velcro
  Possibilità di montaggio ottimale per caschi 
  con aperture di ventilazione disposte in parallelo.
ES Mediante velcro
  Opción de montaje óptima para cascos con 
  aberturas de ventilación situadas paralelamente.
NL Met   klittenbandentwee
  Alternatieve montagemogelijkheid voor rechts getoonde 
  ventilatie-openingen.
FR Avec   bandes Velcrodeux
  Autre option de montage pour les casques dotés d‘ouvertures d‘aération, 
  illustrée à droite.
IT Con due fasce di velcro
  Possibilità di montaggio alternativa per caschi con aperture di ventilazione 
  rappresentate a destra.
ES Con   velcrosdos
  Opción de montaje alternativa para cascos con aberturas de ventilación 
  como las mostradas a la derecha
NL De gewenste positie van de lamp 
  kan door het aandraaien van de 
  schroef worden geborgd.
FR La position souhaitée de 
  l‘éclairage peut être bloquée 
  en serrant la vis.
IT La posizione del fanale desiderata 
  si può bloccare stringendo la vite.
ES La posición deseada del faro se 
  puede fi jar apretando el tornillo.
NL SIGMA TIP:
  Draai de schroef zo vast aan, dat je jouw lamp 
  tijdens de rit ook zonder gereedschap kunt 
  verstellen.
FR ASTUCE SIGMA:
  Serrez la vis de manière à toujours pouvoir 
  régler votre éclairage sans outil pendant 
  le trajet.
IT CONSIGLIO SIGMA:
  Stringete la vite in modo tale da poter 
  spostare il fanale durante la corsa anche 
  senza utensili.
ES CONSEJO SIGMA:
  Aprieta el tornillo de forma que también 
  puedas ajustar tu faro en marcha sin usar 
  herramientas.
Please visit sigmasport.com 
for available accessories
DO YOU ALSO KNOW 
OUR BIKE COMPUTERS?
More SIGMA Bike Computers at sigmasport.com
ROX 4.0 GPS ROX 12.1 EVO GPS
ACCESSOIRES / 
ACCESSOIRES /
ACCESSORI / 
ACCESORIOS
HELMHOUDER / SUPPORT DE CASQUE / SUPPORTO PER CASCO / SOPORTE PARA CASCO
SCHROEFHOUDER / SUPPORT À VISSER / SUPPORTO SCREW-BRACKET / SOPORTE ATORNILLADO
MONTAGE 
/ / /MONTAGE MONTAGGIO MONTAJE
3 61 54
NL Stel de BUSTER 1600 zo in dat andere verkeersdeelnemers niet worden verblind. De BUSTER 1600 
  moet vast met de fi ets verbonden zijn en de lichtbundel mag niet bedekt zijn.
FR Réglez le BUSTER 1600 de manière à ne pas éblouir les autres usagers. Le BUSTER 1600 doit être 
  solidement fi xé au vélo et le faisceau lumineux ne doit pas être obstrué.
IT Posizionate la BUSTER 1600 in modo da non abbagliare gli altri utenti. La BUSTER 1600 deve essere 
  saldamente fi ssata alla bici e la luce non deve essere coperta.
ES Ajusta el BUSTER 1600 de manera que no deslumbre a otros usuarios de la vía. El BUSTER 1600 
  debe estar fi rmemente fi jado a la bicicleta y el haz de luz debe proyectarse sin obstáculos.
360° verstelbaar /
Réglable à 360°/
Regolabile a 360° /
Ajustable 360° /
2
3D Rubber Pad
 35 mm
x x
 31.8 mm
x x
 25.4 mm
x x
 22.2 mm
x x
22.2 - 35 
mm
3D  RUBBER PAD AFSTELLING / AJUSTEMENT / REGOLAZIONE / AJUSTE
ACTION CAMERA ADAPTER / 
ADAPTATEUR POUR ACTION CAMERA / 
ADATTATORE PER ACTION CAMERA / 
ADAPTADOR PARA ACTION CAMERA
3D Rubber Pad
BUSTER 1600FRONTLIGHT
HEADLIGHT
https//cutt.ly/lw7PSIEg
189731-2_BUSTER-1600+HL_Manual_90x55-SP1.indd   1
189731-2_BUSTER-1600+HL_Manual_90x55-SP1.indd   1
189731-2_BUSTER-1600+HL_Manual_90x55-SP1.indd   1
189731-2_BUSTER-1600+HL_Manual_90x55-SP1.indd   1189731-2_BUSTER-1600+HL_Manual_90x55-SP1.indd   1 15.04.2024   14:52:21
15.04.2024   14:52:21
15.04.2024   14:52:21
15.04.2024   14:52:2115.04.2024   14:52:21
Specyfikacje produktu
| Marka: | Sigma | 
| Kategoria: | Ulga | 
| Model: | BUSTER 1600 | 
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Sigma BUSTER 1600, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Ulga Sigma
                        
                         7 Października 2024
                        
                    
                                                            
                        
                         4 Września 2024
                        
                    
                                                            
                        
                         4 Września 2024
                        
                    
                                                            
                        
                         3 Września 2024
                        
                    
                                                            
                        
                         31 Sierpnia 2024
                        
                    
                                                            
                        
                         30 Sierpnia 2024
                        
                    
                                                            
                        
                         30 Sierpnia 2024
                        
                    
                                                            
                        
                         30 Sierpnia 2024
                        
                    
                                                            
                        
                         29 Sierpnia 2024
                        
                    
                                                            
                        
                         29 Sierpnia 2024
                        
                    
                                                            Instrukcje Ulga
- Nanlite
- Fysic
- Ibiza Sound
- Luxli
- Luxform
- Manfrotto
- Lightway
- Light & Motion
- Panzeri
- Profoto
- Be Cool
- Tel Sell
- Roland
- Velleman
- Anslut
Najnowsze instrukcje dla Ulga
                        
                         9 Kwietnia 2025
                        
                    
                                                            
                        
                         8 Kwietnia 2025
                        
                    
                                                            
                        
                         8 Kwietnia 2025
                        
                    
                                                            
                        
                         8 Kwietnia 2025
                        
                    
                                                            
                        
                         8 Kwietnia 2025
                        
                    
                                                            
                        
                         7 Kwietnia 2025
                        
                    
                                                            
                        
                         5 Kwietnia 2025
                        
                    
                                                            
                        
                         5 Kwietnia 2025
                        
                    
                                                            
                        
                         5 Kwietnia 2025
                        
                    
                                                            
                        
                         5 Kwietnia 2025