Instrukcja obsługi Simpson 80271

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Simpson 80271 (3 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 26 osób i została oceniona przez 5 użytkowników na średnio 4.3 gwiazdek

1/06/2022 REV 4

Page 1 of 1 80271 Instructions

FNA Group

7152 - 99th Street

Pleasant Prairie, WI 53158

80271 FOAM CANNON INSTRUCTIONS

Set up:

1.Fill the soap bottle (1) with an approved soap.

Troubleshooting:

1.If water leaks from the adapter joints, inspect, clean, and reapply a PTFE seal tape onto the adapter (2) threads if needed.

2.If the foam cannon produces an insufficient amount of foam, be sure:

•You are using an approved soap

•You are using the correct nozzle for the pressure washer’s PSI rating

•The nozzle is clean and free of debris

•The Pick up tube assembly screen is clean and clear of debris

For help adjusting, using or troubleshooting your foam cannon, please call our team at 877-362-4271

Tips for use:

1.For optimal foam, the pressure washer should produce no less than 1600 PSI.

2.For best foam results, use only approved soaps.*

3.Follow the soap manufacturer’s recommendations for dilution and use.

4.To prevent chemical damage, be sure to run clean water through the foam cannon assembly for at least 30 seconds

untilall parts are rinsed clean.

Components:

1.Soap Bottle

2.Adapter

3.Foam lance (for pressure washers

producing 1600-4000 psi).

4.Pick Up Tube Assembly

1

4

3

2

*NOTICE: To prevent chemical damage to the foam cannon, only use soaps approved for use with pressure washers.

Specyfikacje produktu