Instrukcja obsługi Smartwares FEX-15140

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Smartwares FEX-15140 (3 stron) w kategorii gaśnica. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 4 użytkowników na średnio 4.7 gwiazdek

Maintenance fire extinguishers

General information

This information contains a general guideline for maintaining your fire extinguishers. If you are using

fire extinguishers in a commercial environment, legislation and insurance requirements may apply.

Please check with your local authorities to make sure you comply with all necessary rules and

regulations. The information in this document is general information that may not cover all situations

that may occur during maintenance.

Maintenance on a fire extinguisher should always be carried out by qualified person. In different a

European countries these qualified maintenances companies and the guidelines they follow are

identified in different ways. In the Netherlands, these persons are “REOB certified”, in Germany . In

each country, maintenance and location guideline may be present, there are described in local

standards such as:

Netherlands: REOB certified, NEN-2559 https://hetccv.nl/certificatie-inspectie/vakman/onderhoud-

blusmiddelen/

Belgium: NBN S-050 21

Germany: DIN 14406

Austria: önorm F-1053

UK: BS 5306-3:2009

All local standards are based on product standard EN-3 and give specific information on where to

place extinguishers or how often to maintain them.

For consumers in most European homes, owning a fire extinguishers is not obligatory. Keeping a fire

extinguisher nearby to extinguishing a small, starting fire could however save lives and prevent a lot

of damages. The Dutch fire fighters advise consumers to only fight fires that have the size of a

football. If the fire is bigger, evacuate everyone from the building and call the fire fighters.

Testing and filling instructions

These instructions cover the most basic guidelines to test and refill a Smartwares extinguisher. The

powder extinguisher BB series, foam extinguisher SB series and wet chemical extinguisher VB series

are stored pressure extinguishers. They consist of a cylinder containing the extinguishing agent

(powder, foam or a wet chemical solution) and are permanently pressurized.

Visual inspection

The purchasing date sticker that is included with the extinguisher allows you to mark the installation

date as a reminder. Starting from installation a visual inspection is necessary because the extinguisher

is no longer protected by the giftbox.

Every 3 monthscheck if the safety pin is still in place and read the pressure gauge (manometer) on ,

the extinguisher. This is not applicable for CO2 extinguishers, they do not have a pressure gauge The .

pressure gauge needle must be in the green area. If a rubber hose is present, check the hose for

corrosion and other damages. The instructions on the extinguisher should be readable, the

Specyfikacje produktu