Instrukcja obsługi Snom SP800
Snom
nieskategoryzowany
SP800
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Snom SP800 (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 7 użytkowników na średnio 4.3 gwiazdek
Strona 1/2
ENGLISH
Copyright, Trademarks, Legal Disclaimers
© 2023 Snom Technology GmbH. All Rights Reserved.
Snom, the names of Snom products, and Snom logos are
trademarks owned by Snom Technology GmbH.
All product specications are subject to change without
notication. Snom Technology GmbH reserves the right
to revise and change this document at any time, without
being obliged to announce such revisions or changes
beforehand or after the fact.
Although due care has been taken in the compilation
and presentation of the information in this document,
the data upon which it is based may have changed in
the meantime. Snom therefore disclaims all warranties
and liability for the accurateness, completeness, and
currentness of the information published, except in
the case of intention or gross negligence on the part
of Snom or where liability arises due to binding legal
provisions.
Important Information
Please read the instructions on safety and disposal and
on how to set up and use the device before using it and
also give them to other users to read or inform those
users of their contents.
The nameplate is located at the bottom or rear of the
product.
Safety Instructions
• Warning: The product included (ITE) in this manual
is to be connected only to PoE networks without
routing to the outside plant.
• The socket outlet for the power adaptor must be
near the equipment and easily accessible.
• Mount the device only at heights not exceeding 2m.
• If the device is not supplied with power via the
Ethernet cable, use only a power adapter expressly
recommended by Snom. Other power supplies may
damage or destroy the device, aect its behavior, or
induce noise.
• Avoid placing the cables where people may trip over
them or where they may be exposed to mechanical
pressure as this may damage them.
• This device is for indoor use only! NOT FOR OUT-
DOOR USE!
• Do not install the device in rooms with high
humidity (for example, in bathrooms, laundry
rooms, damp basements). Do not immerse the
device in water and do not spill or pour liquids of
any kind onto or into the device.
• Do not install the device in surroundings at risk
for explosions (paint shops, for example). Do not
use the device if you smell gas or other potentially
explosive fumes.
• Do not use the device during thunderstorms.
Lightning striking the power grid may cause electric
shocks.
SELV (Safety Extra Low Voltage) Compliance
Safety status of input/output connections comply with
SELV requirements.
Warning: To avoid electric shock, do not connect
safety extra-low voltage (SELV) circuits to teledevice-
network voltage (TNV) circuits. LAN ports contain
SELV circuits, and PSTN ports contain TNV circuits.
Some LAN and PSTN ports both use RJ-45 (8P8C)
connectors. Use caution when connecting cables.
Standards conformance
This device complies with the essential health,
safety, and environmental requirements
of all relevant European directives and UK
legislation.
This device meets US and Canadian health, safety, and
environmental standards.
The declaration of conformity can be downloaded at
https://www.snom.com/conformity.
FCC Caution:
Any changes or modications not expressly approved
by the party responsible for compliance could void the
user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Industry Canada
This Class A digital apparatus complies with Canadian
requirements: CAN ICES-3 (A)/NMB-3(A).
This device complies with Industry Canada licence-
exempt RSS standard(s). Operation is subject to the
following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept
any interference, including interference that may
cause undesired operation of the device.
Unauthorized opening, changing, or modifying the
device will cause the warranty to lapse and may also
result in the loss of CE, UKCA, and IC conformity, and
FCC compliance. In case of malfunction contact autho-
rized service personnel, your seller, or Snom. .
Technical specications
• Safety: IEC 62368-1
• Connectors:
◦2 RJ45: 1 x LAN, 1 x PC
◦1 RJ12 (for Debug)
◦2 x USB 2.0 ports, type A
◦1 x coaxial power connector
◦ 1 x 3.5mm headset connector
• Ethernet: 2 x IEEE 802.3, 1 Gigabit Ethernet switch
• Power: Power over Ethernet (PoE) IEEE 802.3af, ,
Class 3. If PoE is not available, use the separately
available power adapter (not included):
◦ Mass Power, model NBS12E050200UV, Snom PN
00004570 (EU, UK, U.S.A.)
• Wallmount bracket. Optional, order separately,
Snom PN 00004657.
Disposal of the device
This device is subject to European Directive
2012/19/EU and may not be disposed of with
general household garbage. If you do not know
where to dispose the device at the end of its
lifespan, contact your municipality, local waste ma-
nagement provider, or vendor.
Cleaning
To clean the device, use an anti-static cloth. Please avo-
id cleaning liquids as they might damage the surface or
internal electronics of the device.
Connecting the device: See Fig. B.
Initializing
1. See Fig. C.
2. Settings depend on the soft client used.
For more information see https://service.snom.com
DEUTSCH
Copyright, Markenrechte, Haftungsausschluss
© 2023 Snom Technology GmbH. Alle Rechte reser-
viert.
Snom sowie die Namen der Snom-Produkte und die
Snom-Logos sind gesetzlich geschützte Marken der
Snom Technology GmbH.
Produktspezikationen können ohne Vorankündigung
geändert werden. Snom Technology GmbH behält sich
jederzeit das Recht auf Überarbeitung und Änderung
v2023004
Remote controlled phone
for soft clients
Quick Installation Guide
SP800
Snom Technology GmbH
Wittestr. 30 G
13509 Berlin, Deutschland
oce.de@snom.com
Snom Technology GmbH
130, avenue Joseph Kessel
78960 Voisins-le-Bretonneux
France
oce.fr@snom.com
Snom Technology GmbH
The Courtyard
High Street
Ascot, Berkshire SL5 7HP, UK
oce.uk@snom.com
Snom Technology GmbH
Via Milano 1
20020 Lainate, Italia
oce.it@snom.com
VTech Communications Inc.
Snom Americas
9020 Washington Square Road,
Suite 555
Tigard, OR 97223
Phone support: (339) 227 6160
VTech Technologies Canada Ltd.
Suite 222
13888 Wireless Way
Richmond, B.C. V6V 0A3, Canada
Phone support: (339) 227 6160
Manufacturer:
VTech Telecommunications Ltd.
23/F., Tai Ping Industrial Centre,
Block 1,
57 Ting Kok Road, Tai Po
HONG KONG
A
GNU
General Public License
Quick Installation
Guide
SP800
Delivery content Lieferumfang Contenu de la boîte En la caja Contenuto della confezione· · · ·
B
Connecting
·
Anschließen
·
Connecter
·
Conectar
·
Collegare
LED LED
Green
Grün
Vert
Verde
Red
Rot
Rouge
Rosso
Rojo
• If PoE not available (power adapter
not included)
• Wenn PoE nicht verfügbar (Netzteil
nicht im Lieferumfang enthalten)
• S'il n'y a pas de PoE (bloc d'ali-
mentation non inclus dans la boîte)
• Si no se dispone de PoE (alimentato-
re non inclusa nella confezione)
• Se non disponibile PoE (fuente de
alimentación no incluido en la caja)
• Headset not included
• Headset nicht im Lieferumfang
enthalten
• Casque non inclus dans la boîte
• Cua non inclusa nella confezione
• Auricular no incluido en la caja
Connect the device
Sending DHCP request
Network without DHCP
Web interface available
Network with DHCP
Application starts with
the settings received from
the server (IP address, net-
mask etc.)
Press the "IP/Reset" button
to listen to the announce-
ment of the IP address
Open the web interface
Register the rst account
Application starts
with the default IP address
and netmask
Click on "Apply" and "Save"
Advanced > Network:
DHCP: O
Change settings "IP
address" and Netmask" "
Device reboots. After reboot:
Default IP address: 192.168.0.2
- it can also be listened to by
pressing the "IP/Reset" button
Open the web interface
Web interface available
"Apply setting changes?"
Click on "Reboot" and con-
rm by clicking on "Yes"
Press the "IP/Reset"
button
Blinking
On
On
On
Red
LED
On
On
On
On
Green
LED
C
Initializing
·
Initialisierung
·
Initialisation
·
Inizializzazione
·
Inicializando
After successful registration, the red LED turns o.
On O
USB 2.0 type A USB 2.0 type A
Weiter auf der Rückseite
Specyfikacje produktu
| Marka: | Snom |
| Kategoria: | nieskategoryzowany |
| Model: | SP800 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Snom SP800, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje nieskategoryzowany Snom
27 Sierpnia 2024
27 Sierpnia 2024
26 Sierpnia 2024
26 Sierpnia 2024
26 Sierpnia 2024
26 Sierpnia 2024
26 Sierpnia 2024
20 Lipca 2024
8 Czerwca 2024
Instrukcje nieskategoryzowany
- Sport-Elec
- NEO Tools
- Antec
- Casa Deco
- WilTec
- Conair
- Balay
- Nearity
- Kalorik
- Maginon
- Infiniton
- Tefal
- Milwaukee
- Cranborne Audio
- Foppapedretti
Najnowsze instrukcje dla nieskategoryzowany
28 Października 2024
28 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024