Instrukcja obsługi Sony XDR-C705DAB
Sony
Dźwięk w wideo
XDR-C705DAB
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sony XDR-C705DAB (4 stron) w kategorii Dźwięk w wideo. Ta instrukcja była pomocna dla 54 osób i została oceniona przez 27.5 użytkowników na średnio 4.6 gwiazdek
Strona 1/4
DAB/FM CLOCK
RADIO
Operating Instructions
XDR-C705DAB
© 2007 Sony Corporation Printed in China
WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to
rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer servicing to
qualified personnel only.
Do not install the appliance in a confined space, such as a bookcase or built-in
cabinet.
To reduce the risk of fire or electric shock, do not place objects filled with liquids,
such as vases, on the apparatus.
Connect the apparatus to an easily accessible AC outlet. Should you notice an
abnormality in the apparatus, disconnect the main plug from the AC outlet
immediately.
Notice for customers: the following information is only applicable to
equipment sold in countries applying EU directives
The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku,
Tokyo, 108-0075 Japan. The Authorized Representative for EMC and product
safety is Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,
Germany. For any service or guarantee matters, please refer to the addresses given
in separate service or guarantee documents.
Features
DAB(Band-III)/FM 2-band digital clock radio
Large clock display and 16 × 2 lines character dot display for text information
Brightness control
4 alarms with various alarm mode; weekdays, weekends, daily and once
20 memory presets (10 DAB, 10 FM)
Current time and Summer time adjustment synchronized with DAB data
Sleep timer
Initial setting for the clock radio
When the first time after purchase, do the following.
1 Plug in the unit.
“Setting clock...” appears in the display, and DAB data adjust the clock as it is
received. When finished, the current time appears in the display.
2 Press / to turn on the radio.RADIO ON OFF•ALARM RESET
The unit will automatically scan and create a list of receivable DAB
broadcasts.
Notes
When the clock will not be set in 3 minutes, “AM 12:03 clock not set...”
appears in the display (see “Setting the clock.”)
If no broadcasts are found by the DAB scan, “Station not available” appears
in the display.
Set the clock
Do the following if DAB broadcast is not available (depending on area). The time
setting mode by DAB becomes invalid.
1 Press and (MENU UP )/ (DOWN ) / to select the •TUNE SELECT
“Set clock,” and then press .ENTER
The hour indication will be displayed as follows.
2 Press (UP )/ (DOWN ) / to set the hour, and then •TUNE SELECT
press .ENTER
3 Repeat step to set the minute, year, month and day.2
After setting the time, the clock starts from 0 seconds.
Notes
If you do not operate within 7 seconds while setting the clock, the clock setting
mode will be cancelled.
Setup time for this operation is adjusted automatically when the customer
operates the set while receiving DAB service.
To change the clock display
You can choose the clock display 12-hour system (default) and 24-hour system.
1 Press and (MENU UP )/ (DOWN ) / to show the •TUNE SELECT
“Clock display” in the display, and then press .ENTER
2 Press (UP )/ (DOWN ) / to select the desired clock •TUNE SELECT
display, and then press .ENTER
The clock display changes by turns (12-hour system:
“AM 12:00” = midnight, 24-hour system: “0:00” = midnight.)
Time adjustment about Summer
time
This unit’s time adjustment will be done only when receiving DAB service.
Receive DAB service for at least one minute to renew the time into Summer time.
Setting the brightness of the
display
Press and hold DISPLAY•BRIGHTNESS for few seconds to change the brightness.
Repeat this step, to select high, middle or low for the display according to your
preferences.
Improving the reception
DAB Band- /FM:III
Extend the wire antenna fully to increase reception sensitivity.
Operating the radio
The unit can receive DAB services and FM stations.
1 Press / to turn on the radio.RADIO ON OFF•ALARM RESET
When the unit is turned on again, the last band you listened to is received.
2 Press DAB FM/ repeatedly to select the desired band.
Each press changes the band as follows:
3 Press the (UP )/ (DOWN ) / to tune to the desired •TUNE SELECT
service or station.
If you are selecting DAB, press .ENTER
4 Adjust the volume using / .VOL + –
Note in FM usage
The frequency step is set to 0.05 MHz on FM.
Notes in DAB usage
If there are no services, you can choose only MANUAL mode.
“Station not available” appears when the ensemble for the selected service
cannot be received.
About the SC (Secondary Component)
If the selected primary component has a secondary component, “” appears in
the display.
Press (UP )/ (DOWN ) / and to receive the desired •TUNE SELECT ENTER
secondary component. “” appears while the secondary component is received.
Note
When the selected secondary component is finished, the unit returns
automatically to the primary component.
Presetting your favourite services
or stations
You can preset 10 services in DAB and 10 stations in FM.
Presetting services or stations
1 Follow steps to in “Operating the radio” and manually tune in to 1 3
the broadcast you wish to preset.
2 Press . PRESET
3 Press (UP )/ (DOWN ) / to select the favourite •TUNE SELECT
number to preset, then press and hold .PRESET
“saved” appears for 7 seconds in the display and the service or station is
stored. (DAB services are stored with a service label.)
Notes
To preset another service or station, repeat these steps.
To change the preset service or station, tune in to the desired service or
station and repeat steps and . The new service or station will replace the 2 3
previous service or station.
When the service or station is not registered, “Empty preset” appears in the
display.
If you do not operate within 7 seconds during the above steps, the current
mode will be cancelled.
Tuning in to a preset service or station
1 Press .PRESET
2 Press (UP )/ (DOWN ) / to select the desired preset •TUNE SELECT
station and then press .ENTER
Notes
When the service or station is not registered, “Empty preset” appears in the
display.
If you do not operate within 7 seconds during the above steps, the current
mode will be cancelled.
3-218-336- (1)13 Scan tuning (for FM)
The unit will automatically scan FM station.
1 Press / to turn on the radio. RADIO ON OFF•ALARM RESET
2 Press DAB FM/ to select the FM band.
3 Press (UP )/ (DOWN ) / to choose the direction, •TUNE SELECT
and then press . ENTER•FM SCAN
UP(): Scans to the higher frequency.
DOWN(): Scans to the lower frequency.
Scanning starts from the frequency being tuned in. When a station is received,
scanning stops.
4 If necessary, press (UP )/ (DOWN ) / to tune in to •TUNE SELECT
the station more precisely.
5 Adjust the volume using / .VOL + –
Setting the alarm
This unit allows you to set four alarm programmes (ALARM 1 - 4).
The alarm time can be set for every programme and the alarm sound is selectable
from radio or buzzer.
The alarm will come on at the same time everyday. Before setting the alarm, make
sure to set the clock (See “Setting the Clock”.)
To set the alarm time
1 Press and (MENU UP )/ (DOWN ) / to select •TUNE SELECT
“Alarm settings,” and then press .ENTER
2 Press (UP )/ (DOWN ) / to select the desired alarm •TUNE SELECT
(1 - 4) and then press .ENTER
When the alarm is not set up, “Not in use” appears in the display.
3 Press (UP )/ (DOWN ) / to select the alarm mode •TUNE SELECT
(DAB, FM and buzzer) and then press .ENTER
“Set alarm” appears in the display.
If you select DAB or FM, “Set volume” appears in the display. In this case,
repeat this step and adjust the volume.
4 Press (UP )/ (DOWN ) / to select “ON,” and then •TUNE SELECT
press .ENTER
The alarm time appears in the bottom of the display, and the arrow appears in
both sides of the hour indicator.
5 Press (UP )/ (DOWN ) / to set the hour, and then •TUNE SELECT
press .ENTER
The arrow appears in both sides of the minute indicator.
6 Repeat step to set the minute and the alarm mode.5
The alarm mode as follows:
Weekdays: Every Monday to Friday
Weekends: Every Saturday and Sunday
Daily: Everyday from Sunday to Saturday
Once: Once only
If you select “Once” repeat step to set the year, month and day.5
7 Press .ENTER
The setting is complete.
Tip
You can set the alarm using button on the unit.ALARM
Press and follow after steps .ALARM 2
Notes
The default alarm time for radio and buzzer is the current time of the clock.
If you quit during the alarm setting, after about 7 seconds the previous display
will return.
If a second alarm sounds during a first (or the snooze function is active), the
second alarm takes priority.
If the alarm sounds at the same time (or the snooze function is active), the large
alarm number takes priority.
When Summer time begins, it is necessary to adjust the current time by
manually (see “Time adjustment about Summer time” ).
To set the alarm on/off
1 Follow steps to in “To set the alarm time.”1 4
“Set alarm” appears in the display.
2 Press (UP )/ (DOWN ) to set the alarm “ON” or •TUNE SELECT
“OFF,” and then press .ENTER
ON: “ALARM (1-4)” appears in the display when the alarm setting is
complete.
OFF: “ALARM (1-4)” turn off from the display.
3 Follow after step in “To set the alarm time.”5
The setting is complete.
To doze for a few more minutes
Press / .SNOOZE SLEEP OFF
The radio or buzzer turns off but will automatically come on again after about
5 minutes. (while the snooze function is operating, “Snooze” flashes in the
display.)
To stop the alarm
Press / to turn off the alarm. RADIO ON OFF• ALARM RESET
The alarm will come on again at the same time the next day.
Setting the Sleep Timer
You can enjoy falling asleep to the radio using the built-in sleep timer that turns
off the radio automatically after a preset duration.
1 Press while the unit is turned on.SLEEP
“Sleep” appears in the display.
2 Press to set the sleep timer duration.SLEEP
Each time you press , the duration changes as follows:SLEEP
The unit automatically turns off when the duration time is passed.
Press or 7 seconds after you have finished setting the duration setting and ENTER
released , “activated” appears in the display and then the sleep timer starts. SLEEP
The unit will play for the duration you set, and then shut off.
To change the Sleep Timer setting
Repeat step to select the desired sleep timer setting even after the sleep timer 2
has been activated.
To deactivate the Sleep Timer
Press SNOOZE SLEEP OFF/ , the unit will turn off.
Press SLEEP to set the sleep timer “OFF,” only the sleep timer will be cancelled
(the radio keeps ON).
Dream Machine is a trademark of Sony Corporation.
AC power
cord
Wire antenna
There is a tactile dot beside VOL +.
Continue to next page
Specyfikacje produktu
| Marka: | Sony |
| Kategoria: | Dźwięk w wideo |
| Model: | XDR-C705DAB |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Sony XDR-C705DAB, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Dźwięk w wideo Sony
14 Stycznia 2025
12 Stycznia 2025
11 Października 2024
5 Października 2024
9 Sierpnia 2024
9 Sierpnia 2024
9 Sierpnia 2024
8 Sierpnia 2024
8 Sierpnia 2024
8 Sierpnia 2024
Inne instrukcje Sony
9 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025
5 Kwietnia 2025
4 Kwietnia 2025
4 Kwietnia 2025
4 Kwietnia 2025
4 Kwietnia 2025