Instrukcja obsługi Supermicro MicroBlade MBI-6418A-T7H
Supermicro
serwer
MicroBlade MBI-6418A-T7H
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Supermicro MicroBlade MBI-6418A-T7H (86 stron) w kategorii serwer. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 4.8 gwiazdek
Strona 1/86

MBI-6418A-T5H/T7H
MicroBlade Module
User’s Manual
Revison 1.0c

MBI-6418A-T5H/T7H MicroBlade Module User’s Manual
ii
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The
vendor assumes no responsibility for any inaccuracies that may be contained in this document, and
makes no commitment to update or to keep current the information in this manual, or to notify any person
or organization of the updates. Please Note: For the most up-to-date version of this manual, please
see our website at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product described
in this manual at any time and without notice. This product, including software and documentation, is the
property of Supermicro and/or its licensors, and is supplied only under a license. Any use or reproduction
of this product is not allowed, except as expressly permitted by the terms of said license.
IN NO EVENT WILL Super Micro Computer, Inc. BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR
INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER, INC. SHALL NOT HAVE
LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT,
INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR
RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa Clara
County in the State of California, USA. The State of California, County of Santa Clara shall be the
exclusive venue for the resolution of any such disputes. Supermicro's total liability for all claims will not
exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class A digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in industrial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the manufacturer’s instruction manual, may cause harmful interference with radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case you
will be required to correct the interference at your own expense.
California Best Management Practices Regulations for Perchlorate Materials : This Perchlorate warning
applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”.
Manual Revison 1.0c
Release Date: June 26, 2020
Unless you request and receive written permission from Super Micro Computer, Inc., you may not copy
any part of this document. Information in this document is subject to change without notice. Other
products and companies referred to herein are trademarks or registered trademarks of their respective
companies or mark holders.
Copyright © 2020 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov .
!

iii
Preface
About this Manual
This manual is written for professional system integrators, Information Technology
professionals, service personnel and technicians. It provides information for the
installation and use of the Supermicro MBI-6418A-T5H/T7H MicroBlade module.
Installation and maintenance should be performed by experienced professionals only.
Manual Organization
Chapter 1: Introduction
The first chapter provides a checklist of the main components included with
MBI-6418A-T5H/T7H MicroBlade module and describes their main features.
Chapter 2: System Safety
You should familiarize yourself with this chapter for a general overview of safety
precautions that should be followed when installing and servicing MBI-6418A-T5H/T7H
MicroBlade module.
Chapter 3: Setup and Installation
Refer to this chapter for details on installing the MBI-6418A-T5H/T7H MicroBlade
module into the MicroBlade chassis. Other sections cover the installation and placement
of memory modules and the installation of hard disk drives into the blade module.
Chapter 4: Blade Module Features
This chapter coves features and component information about MBI-6418A-T5H/T7H
MicroBlade module. Included here are descriptions and information for mainboard
components, connectors, LEDs and other features of the blade module.
Chapter 5: BIOS
BIOS setup is covered in this chapter for MBI-6418A-T5H/T7H MicroBlade module.
Appendix A: BIOS POST Codes
BIOS POST Codes for MBI-6418A-T5H/T7H MicroBlade module are explained in this
appendix.
Secure Data Deletion
A secure data deletion tool designed to fully erase all data from storage devices can be
found on our website: https://www.supermicro.com/about/policies/disclaimer.cfm?url=/
wftp/utility/Log9_Secure_Data_Deletion_Utility/
Specyfikacje produktu
Marka: | Supermicro |
Kategoria: | serwer |
Model: | MicroBlade MBI-6418A-T7H |
Kolor produktu: | Grey, Silver |
Wysokość produktu: | 30.48 mm |
Szerokość produktu: | 125.48 mm |
Głębokość produktu: | 489.25 mm |
Waga produktu: | 1130 g |
Ilość portów Ethernet LAN (RJ-45): | 2 |
Zakres temperatur (eksploatacja): | 10 - 35 °C |
Zakres wilgotności względnej: | 8 - 90 % |
Taktowanie procesora: | 2.4 GHz |
Typ procesora: | Intel Atom® |
Model procesora: | C2750 |
Przewodowa sieć LAN: | Tak |
Waga wraz z opakowaniem: | 2150 g |
Diody LED: | Fault, Network, Power |
Zakres temperatur (przechowywanie): | -40 - 70 °C |
Dopuszczalna wilgotność względna: | 5 - 95 % |
Ilość obsługiwanych rozmiarów dysków pamięci: | 1 |
Obsługiwane rodzaje dysków: | HDD & SSD |
Obsługiwane rozmiary dysków pamięci: | 2.5 " |
Producent procesora: | Intel |
Obsługiwane rodzaje pamięci: | DDR3-SDRAM |
Maksymalna pojemność pamięci: | 32 GB |
Gniazdo procesora: | BGA 1283 |
Układ płyty głównej: | Intel SoC |
Typ BIOS: | EEPROM |
Zasilanie: | - W |
Wspierane interfejsy dysków twardych: | Serial ATA III |
Dołączona myszka: | Nie |
Bezpieczeństwo: | EN60950-1, CE, TUV |
Korekcja ECC: | Tak |
Rozmiar pamięci BIOS: | 64 Mbit |
Wersja ACPI: | 5.0 |
Wersja interfejsu zarządzania pulpitem (DMI): | 2.3 |
Wersja systemu BIOS (SMBIOS): | 2.7.1 |
Wbudowane opcje dostępne: | Nie |
W zestawie klawiatura: | Nie |
Rodzaj pamięci: | 204-pin SO-DIMM |
Napięcie pamięci: | 1.35, 1.5 V |
Ilość slotów DIMM: | 2 |
Liczba obsługiwanych procesorów: | 1 |
Magistrala pamięci: | 72 bit |
Obsługuje rozmiary DIMM: | 1GB, 2GB, 4GB, 8GB, 16GB, 32GB |
Funkcje BIOS: | APM 1.2, SMBIOS 2.7.1, UEFI |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Supermicro MicroBlade MBI-6418A-T7H, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje serwer Supermicro
30 Stycznia 2025
11 Stycznia 2025
11 Stycznia 2025
8 Stycznia 2025
28 Grudnia 2024
28 Grudnia 2024
24 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
Instrukcje serwer
- serwer EMC
- serwer Opengear
- serwer QNAP
- serwer Matrox
- serwer Blackmagic Design
- serwer Dual Bay
- serwer Silverstone
- serwer D-Link
- serwer SIIG
- serwer Smart-AVI
- serwer Sun
- serwer LevelOne
- serwer G-Technology
- serwer Rocstor
- serwer Maxdata
Najnowsze instrukcje dla serwer
9 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
2 Kwietnia 2025
28 Marca 2025
28 Marca 2025
28 Marca 2025
10 Marca 2025
10 Marca 2025
10 Marca 2025