Instrukcja obsługi Sweex LAN PCI Network Card 10/100 Mbps

Sweex Karta sieciowa/adapter LAN PCI Network Card 10/100 Mbps

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Sweex LAN PCI Network Card 10/100 Mbps (3 stron) w kategorii Karta sieciowa/adapter. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 6.5 użytkowników na średnio 4.6 gwiazdek

Pobierz PDF

Strona 1/3

Introduction

First of all, many thanks for purchasing this Sweex LAN PCI Card. To ensure this product operates correctly, we advise you to carefully read this

manual first. If despite this manual you still experience problems during installation or operation of this product, go to www.sweex.com and look

under the heading service & support.

We advise you to ensure that the PC operating system is up-to-date before starting the installation. This is easy to check by starting up “Internet

Explorer” and selecting the option “Windows Update” in the “Extra” menu. This Sweex LAN PCI Card is fully supported by Windows Microsoft®,

Windows® XP, Windows Vista®, Windows® 7.

Package Contents

Prior to installation, check if all required parts are present. The following parts must be present in the box:

• 10/100NetworkcardPCI  

• Quickinstallationguide  

• CDwithsoftware,drivers,manual  

If one of the above parts is missing, please contact the supplier.

Specifications

• Single-chipcontrollerforPCIlocalbusrevision2.2

• Supports:‘WakeOnLAN’(WOL)atPCIrevision2.2

• Inaccordancewith802.310BASE-TandIEEE802.3u100BASE-TXstandard

• Realtek8139chipset

• SingleshieldedRJ-45connectorforuseat10or100Mbps

• HighperformancebusmasterstructureforlowCPUandbususage

• Supports:ACPIandPCIpowermanagement

• 1diagnosisLEDforlinkstatusanddatatransfer

• Supports:WindowsMicrosoft®,Windows®XP,WindowsVista®,Windows®7

English version

Installation of hardware

Take the following precautionary measures prior to installing the hardware:

• EnsurethePCisswitchedoffandnotconnectedtothemainsoranyotherpowersupply.

• Also,disconnecttheprinterandmonitorcables(theyhavetheirownpowersupply)tomakeabsolutelysurethatthePCisnotlive.

• Nowunscrewthecomputercasing.

• Subsequently,removeanystaticelectricityyoumaycarryonyourbody.Dothisbytouchinga(neutral)pipeofthecentralheatingsystem

oranunpaintedwaterpipe,amongotherthings.Pleasenotethatyoumustnotuseamagneticscrewdriverforthis.Beforeyouproceedany

further, shortly touch the iron frame of the PC casing. Make sure that you minimise contact with any contact points of the PC Card or the

memory.

• FindavacantPCIslotandremovethemetalguardplatepartofthecomputercasinginfrontoftherelevantslot.Onoccasionthecarddoes

not allow to be inserted in the PCI slot smoothly. Should this be the case, do not force anything, but try another available slot.

• Oncethecardhasbeensuccessfullyinstalled,checkwhetherallothercardsarestillproperlyinsertedinthePCIslots.Itispossiblethatthe

other PCI cards are lifted up slightly when installing a new PCI card; as a result, the relevant cards or even the entire PC may no longer

operate correctly.

• Replacethecasingonthecomputerbaseandcorrectlyreconnectallcables.

• SwitchonthePCagain.

Installation Windows Microsoft®, Windows® XP, Windows Vista®, Windows® 7

StartthePConcethehardwareinstallationhasbeencompleted.WindowswillautomaticallydetecttheSweexLANPCICard10/100Mbps.

No drivers are required for installation under Microsoft® Windows® XP, Windows Vista®, Windows® 7 as they are all present within

the operating system, provided it is up-to-date. If Windows nevertheless indicates that the hardware must be installed, follow the following

procedure:

Click‘Next’inthecorrespondingscreenwhichwillappearautomatically.Nowselecttheoption‘Searchforthebestdriver’andclick‘Next’.

Inthenextscreen,selecttheCD-ROMDriverasthelocationforthesearchtobecarriedout.WindowswilllocatethedriverontheCD-ROM(if

not,itcanalsobefoundontheCD-ROM–Driversvia‘Specifyalocation’.Subsequently,select‘Usetheupdateddriver’andclick‘Next’.The

hardware has been installed successfully and is ready to be used.

If you experience an issue that is not listed in this manual, please consult the frequently asked questions section of your product on the sweex.

com website.

English version

Sweex warranty conditions

2-yearstandardwarrantywithintheEU

Inastandardmannerawarrantyperiodof2yearsasfromthepurchasedateisavailableforthisSweexproductwithintheEU.

Shouldyouwishtoinvokethiswarrantywithinthefirst2yearsafterthepurchasethenyoucandirectlyapplytothepointofsalewhereyou

purchased the product for the conditions and procedures.

10-yearmanufacturer’swarranty

However,inadditiontothestatutory2-yearstandardwarrantySweexoffersyouanextendedqualitywarrantyofnolessthan10years,ifyou

purchased your product within the EU.

Formoreinformation,conditionsandtheregistrationformgotowww.sweex.com/12yearswarrantyandregisterwithin30daysafterthe

purchaseofyourproductfortheextendedwarrantyperiodofintotal12years.

Matters that are excluded from the warranty

The warranty of Sweex only covers manufacturing defects. Excluded from the warranty are accessories like batteries, rechargeable batteries and

also supplied software, where applicable.

TheliabilityofSweexislimitedtothecostsofrepairand/orreplacementoftheproductcoveredbythewarranty.

The standard warranty is null and void if the product has been opened, changes have been made, physical damage was caused to the product

and if the product is used for another purpose than for which it is originally meant.

All brand names and associated rights mentioned in this manual are and remain the sole property of the rightful claimant.

English version

Specyfikacje produktu

Marka:	Sweex
Kategoria:	Karta sieciowa/adapter
Model:	LAN PCI Network Card 10/100 Mbps

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Sweex LAN PCI Network Card 10/100 Mbps, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Karta sieciowa/adapter Sweex

Sweex LAN PCI Network Card 10/100 Mbps Instrukcja

16 Września 2024

Sweex LW154 Instrukcja

15 Września 2024

Sweex LW324 Instrukcja

11 Września 2024

Sweex LAN PC Card Gigabit Instrukcja

11 Września 2024

Sweex BT203V2 Instrukcja

10 Września 2024

Sweex FW021 Instrukcja

7 Września 2024

Sweex 3 port Firewire PCI Express Card Instrukcja

6 Września 2024

Instrukcje Karta sieciowa/adapter

Najnowsze instrukcje dla Karta sieciowa/adapter

Mikrotik RB493 Instrukcja

8 Kwietnia 2025

EtherWAN EX41941F Instrukcja

3 Kwietnia 2025

Vigitron MaxiiView Vi00023 Instrukcja

3 Kwietnia 2025

AVPro Edge AC-MXNET-10G-TCVR Instrukcja

2 Kwietnia 2025

EtherWAN TG103H-0802 Instrukcja

2 Kwietnia 2025

AVPro Edge MXNet AC-MXNET-10G-TCVR Instrukcja

1 Kwietnia 2025

ScreenBeam ECB6250 Instrukcja

30 Marca 2025

Ubiquiti Networks USW-Aggregation Instrukcja

29 Marca 2025

Vigitron Vi22601 Instrukcja

14 Marca 2025

Vigitron Vi22201 Instrukcja

14 Marca 2025