Instrukcja obsługi Synco WAir-G1L
Synco
nieskategoryzowany
WAir-G1L
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Synco WAir-G1L (2 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 7.5 użytkowników na średnio 4.4 gwiazdek
Strona 1/2
Thank you for choosing SYNCO product.
Please read this manual carefully before use and follow all instructions
mentioned herein.
Microphone G1T/ G1L User Manual
Caring For Your SYNCO Product
Package List
Product Instruction
Operations
Please keep the product in a dry, clean, dust-free environment.
Keep corrosive chemicals, liquids and heat source away from the
product to prevent mechanics damage.
Use only a soft and dry cloth for cleaning the product.
Malfunction may be caused by dropping, impact of external force.
Do not attempt to disassemble the product. Doing so voids warranty.
Please have the product checked or repaired by authorized
technicians if any malfunctions happened.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
TX Transmitter x1 RX Receiver (Type-C or
Lightning Connector) x1
Carrying Bag x1
Mic Windshield x1 Charging Cable x1
TX Transmitter
RX Receiver
Indicator — TX Transmitter
Indicator — RX Receiver
① External Mic Input
② USB-C Port
③ Power/ Mute
④ Reset(Help with Eject Pin)
⑤ Low Cut
① Vocal Eects
② Pairing/ Gain Control
③ USB-C Port
⑥ Pairing
⑦ Built-in Mic
⑧ Pocket Clip
⑨ Pairing/ Muting Indicator
⑩ Power Indicator
④ Detachable Connector
⑤ 3.5mm In-Ear Monitoring Jack
⑥ Pairing Indicator
TX
1.Power/ Mute
2.Charging
3.External Mic Input
4.Mic Windshield & Device Installation
5.Reset
6.Low Cut
7.Pairing
Long Press 3s: turn on/o the system
Short Press: mute/unmute the
microphone
5V/2A;
Please fully charge the product
before use with USB-C charging
cable.
Slow ashes System unpaired
Slow ashes
Keeps on
System unpaired /
System paired Vocal eects on
/
Pairing/ Muting Indicator Power Indicator
Pairing Indicator
Fast ashes System pairing
Fast ashes System pairing /
/
/
Keeps on System paired
Low cut on
Muting
Fast ashes
twice
Short Press: 150Hz Low Cut On
Short Press again: Low Cut O
Gently poke the pin into Reset for 3 seconds to
restore factory defaults.
The system will pair automatically after power on.
Manual pairing: long press the pairing button on the RX and TX for 3
seconds at the same time
TRS Mic Only
( When using an external mic, please insert it Note:
into the mic input properly.)
Eject Pin
Long press for 3s
at the same time
TX RX
TX
Low battery
/
/
Stays on when
charging and is o
after fully charged
RX
1.Vocal Eects
Short press to switch sound eects: Original -
Studio FX - KTV FX - Voice Amplication - EDM
(Electronic Dance Music) - Baby FX - Male to
Female - Female to Male - Monster FX
3.USB-C Port
For charging phone device
The system will pair automatically
after power on.
2.Pairing/ Gain Control
4.Detachable Connector
G1T: Type-C connector
G1L: Lightning connector
Extra Type-C or Lightning connector is available separately to adapt RX
to more phone devices.
Manual pairing: long press the pairing button on the RX
and TX for 3 seconds at the same time
Gain Control: 0-3 Level
Each short press increases gain by one level.
Long press for 3s
at the same time
TX RX
Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou,
China, 510000
support@syncoaudio.com
www.syncoaudio.com
https://www.facebook.com/syncomicrophones
Guangzhou Zhiying Technology Co., Ltd
Type-C connector Lightning connector
Wireless Transmission
RF Frequency Band
Working Distance
Sampling Rate
Bit Depth
SNR
Audio Input
RF Output Power
Power Requirements
Battery Type
Charging Port
Battery Charging Time
Form Factor
Sound Field
Polar Pattern
Frequency Range
Sensitivity
Maximum SPL
Digital 2.4GHz
2400-2483.5MHz
492ft/150m(LOS area);
164ft/50m(NLOS area)
48KHz
16Bit
﹥75dB
1/8" / 3.5mm TRS Mic Input
20dB
3.3V-4.7V
Built-in Lithium Battery, 400mAh
USB-C
1.5H
Built-in Mic
Mono
Omnidirectional
50-20KHz
-42dB (±3dB, re 1V/Pa at 1KHz)
110dB SPL (at 1KHz)
TX Transmitter
Microphone
Warranty Exclusions and Limitations
Faults resulted from inappropriate use of a product without following its
operation specication
Warranty Claim Procedure
If failure or any problem occurs to your product after purchase,
please contact a local agent for assistance, or you can always contact
SYNCO’s customer service through email at support@syncoaudio.
com.
Please retain your sales receipt and warranty certicate as proof of
purchase. If any of these documents is missing, only sales return or
chargeable service will be provided.
If the SYNCO product is out of the warranty coverage, the service and
the parts cost will be charged.
Warranty Period
Thank you for purchasing SYNCO products.
1. Customers are entitled to free replacement or repair service in case of
quality defect(s) found in the product under normal use within 30 days
upon receipt of the product.
2. Original SYNCO products are entitled to limited warranty 12-month
service. The warranty period begins on the date of purchase of brand
new, unused products by the rst end-user.
Within the warranty period, if product defect or failure is attributable to
material defection or technological problem, the defective product or
defective part will be repaired or replaced without charge (service and
materials fee).
Wireless Transmission
RF Frequency Band
Working Distance
Sampling Rate
Bit Depth
Antenna
Number of Audio Channels
Monitoring
Audio Output
Gain
Power Requirements
Dimensions
Material
Weight
Digital 2.4GHz
2400-2483.5MHz
492ft/150m(LOS area);
164ft/50m(NLOS area)
48KHz
16Bit
Built-in
2
3.5mm In-Ear Monitoring
Lightning or Type-C Output
0-3 Level
5V 1A
55X31X13mm
ABS
12g
RX Receiver
Specications
Warranty
5.3.5mm In-Ear Monitoring Jack
For real-time monitoring mic recording and device’s backgrounding
with headphones
Articial damage, e.g. crash, squeeze, scratch, or soaking
Modications to a product by its user or a third party without prior
written consent of SYNCO, e.g. replacement of element or circuit,
label alteration
The code on product is inconsistent with that of warranty certicate,
or the code on the product or warranty certicate is altered or torn o
All consumable accessory attached to a product, like cable, wind
mu, battery
Faults as a result of force majeure, such as re, ood, lightning, etc.
Battery Life
Dimensions
Material
Weight
8H
52×42×16mm
ABS
35g
WARRANTY CERTIFICATE
USER
INFORMATION
SALES
INFORMATION
REPAIR
RECORD
RESULT
Please register your warranty. Meanwhile, you are welcomed to contact
us via Email：support@syncoaudio.com
Customer Name:
Phone Number:
Email:
Address:
Sales Date:
Model:
Product Code:
Dealer:
Service Date:
Technician:
Issue:
Solved Unsolved Returned(Replaced)
Specyfikacje produktu
| Marka: | Synco |
| Kategoria: | nieskategoryzowany |
| Model: | WAir-G1L |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Synco WAir-G1L, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje nieskategoryzowany Synco
16 Września 2024
13 Września 2024
13 Września 2024
13 Września 2024
13 Września 2024
Instrukcje nieskategoryzowany
- nieskategoryzowany Ilve
- nieskategoryzowany Howard Leight
- nieskategoryzowany SRS
- nieskategoryzowany Homematic IP
- nieskategoryzowany Carlo Gavazzi
- nieskategoryzowany Paradigm
- nieskategoryzowany Homedics
- nieskategoryzowany AURALiC
- nieskategoryzowany Balay
- nieskategoryzowany Pyle
- nieskategoryzowany Statron
- nieskategoryzowany Andover
- nieskategoryzowany DBX
- nieskategoryzowany GVM
- nieskategoryzowany Kiev
Najnowsze instrukcje dla nieskategoryzowany
28 Października 2024
28 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024
27 Października 2024