Instrukcja obsługi TOA N-8052DS
TOA
Niesklasyfikowane
N-8052DS
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TOA N-8052DS (2 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 5.5 użytkowników na średnio 4.5 gwiazdek
Strona 1/2
INSTALLATION
MANUAL
DOOR STATION N-8052DS
Designed to connect to the IP Intercom Exchange, the N-
8052DS is a door station featuring high quality hands-free
conversation and has a contact output (momentarily closed)
to remotely control an electronic door lock.
Using with an electrical box , the station can be mounted to
The N-8052DS features robust indoor design, The operating
temperature range is –10 to +50°C.
As prov ided w ith guar d ne ts i nsi de to c ove r o ve r the
openings of microphone and speaker, the N-8052DS can be
installed free from care in public space.
2. WALL MOUNTING
1. GENERAL DESCRIPTION
Mount ing t o a 2-gang Swit ch Box (wit h cover)
Mount the N-8052DS to electrical
boxes mounted in the wall.
Not e s
The wall should be over 12 mm thick, and the opening in
the wall for a n electrica l box shoul d be under 115 mm
(wide) by 116 mm (high).
When us ing for electro nic door lock con trol, fix the N-
8052DS with tamper-proof screws such as "Torx" screws
to prevent it from being easily removed.
Be sure to ground the electrical box.
4. WIRING
4.1. Connect ion t o t he Exchange
4.2. Connect ion t o an External Re lay
Connect the Exchange to the station's LINE terminals via
the E-7000TB Terminal Board as illustrated.
E-7000TB
Terminal board
Mini-clamp connector
(Supplied with the
N-8000EX/8010EX)
Twisted pair cable
N-8000EX/8010EX Exchange
16 lines
Both upper and lower
terminals (clip terminals)
are internally connected.
The N-8052DS co mes with 2 types of screws: ov al head
combi nation scre w M4 x 25 and o val hea d combination
screw UNC No.6 x 18. For the electrical box provided with
unified threads, use the oval head combination screws UNC
No.6 x 18.
Accessory sc re ws
External
power supply
Relay
Diode
N-8000EX/8010EX Exchange
+24 V DC
GND
+
-
3. INSTALLATION PRECAUTIONS
Wh en ins talling th e N- 80 52DS
outdoors or at locations where it gets
wet with water, tightly seal the panel
edges. Besides, provide a weep hole
at the underside of the mounting box
to permit water to drain off.
When installing the N-8052DS under
dif ficul t e nv iro nm ent al conditio ns
such as in coastal areas or at humid
locations, cover the insid e of the N-
8052DS with coating. For the coating
method, consult TOA sales office.
Seal the panel edges.
N-8052DS's
front panel
YC-302
2-gang electrical box
(option)
Wall surface
N-8052DS
N-8052DS (rear panel)
LINE
H
C
Open collector output:
30 V DC, 50 mA
N-8052DS (rear panel)
LINE
H
C
a wall.
Oval head combination screw
M4 x 25 (accessory)
4.3. T ype of Cable
The types of cables are to be determined according to the
following conditions.
Twis ted pair wir es ( such as t hose use d for ele ctro nic
push-button telephone) are to be used for wiring between
the Exchange and the stations in principle.
The nu mber of cables pairs laid should be de termin ed
considerin g th e po ssibility of future exp ans ion of t he
system.
Out door wi res sh ould be us ed whe re wi rin g pas ses
through inaccessible areas such as ceilings or under floors
where the m ainten ance i s not perfo rmed. I ndoor wires
may also be used, however, in case where there is no risk
of deterioration due to exposure to heat, etc.
Not e
Specifications related to each junction are as follows.
Mini-clamp connector (N-8000EX/8010EX line terminal)
Conductor diameter: ø0.4 – 0.65 mm (AWG22 – 26),
solid wire
Outside diameter: ø1.05 mm or below
Clip terminal (E-7000TB)
Conductor diameter: ø0.4 – 0.8 mm (AWG20 – 26),
solid wire
Outside diameter: ø1.5 mm or below
Terminal station (LINE, H, C terminals)
Conductor diameter: ø0.4 – 1.3 mm (AWG16 – 26),
solid wire, stranded wire
4.5. T erminal Stat ion Connection
St e p 1. Stri p a ca ble j acket of appro x 7 m m to expos e
inner cable.
For cables, refer to Type of Cable.
Not e
Do not solder plate on exposed inner cables when
using a stranded wire.
St e p 2. Loosen the terminal screws and insert the cables.
St e p 3. Tighten the terminal sc rews securely.
Not e s
Tug lightly on the cable to be sure that it does not
pull free . I f t he ca ble p ull s f ree, lo osen th e
terminal screw again and reconnect from Step 2.
To avo id st ri pp ing t he s cre ws , us e th e
screwdriver appropriate to the screws tightened
into the terminal plug.
4.4. Relat ions Bet ween Core Diameter of Cable
and Maximum Cable Length
Referrin g to the followin g chart a s guideli nes, desi gn the
distance between the Exchange and stations so that loop
resistance becomes 170 or less.
4.6. Mini-clamp Connector Connect ion
Connect the mi ni-c lamp connect or su ppli ed wi th th e N-
8000EX/8010EX to a cable using a commercially available
tool (pliers).
S tep 1. Cut off two-cable ends in equal length, and insert
them securely to a cover section (transparent side)
of the mini-clamp connector.
Not e
Inse rt th e cabl e wit hout
stripping the cable jacket.
St e p 2. With a pair of pliers, lightly
pinch the mini-clamp cover
and, after ensuring that the
cable is s ecurely ins erted ,
firmly squeeze on the cover.
Not e
Sq ueeze o n t he m ini-c lam p c ove r un til it i s
correctly locked.
St e p 3. In sert th e wi re d c o nnec tor ( pl ug ) in to t he
exchange's c onnect or (soc ket) until it locks into
place.
Cover
(transparent side)
Cable
N-8000EX/8010EX Rear panel
Conductor Loop Maximum cable length
diameter resistance between the Exchange and station.
(mm) ( / km)
(Assuming that the loop resistance is 170 .)
ø0.4 295 570 m
ø0.5 187 900 m
ø0.65 113 1.5 km
ø0.9 58 2.9 km
7 mm
Tighten
Terminal screw
Cable
133-02-002-9700
Specyfikacje produktu
| Marka: | TOA |
| Kategoria: | Niesklasyfikowane |
| Model: | N-8052DS |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z TOA N-8052DS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane TOA
11 Grudnia 2024
9 Października 2024
8 Października 2024
8 Października 2024
7 Października 2024
7 Października 2024
7 Października 2024
3 Października 2024
26 Września 2024
26 Września 2024
Instrukcje Niesklasyfikowane
- Niesklasyfikowane Malstrom
- Niesklasyfikowane Kelvinator
- Niesklasyfikowane Nutrichef
- Niesklasyfikowane Krontaler
- Niesklasyfikowane James
- Niesklasyfikowane TV One
- Niesklasyfikowane Wiesenfield
- Niesklasyfikowane Wacker Neuson
- Niesklasyfikowane InfiRay
- Niesklasyfikowane Paulmann
- Niesklasyfikowane Prenatal
- Niesklasyfikowane Huawei
- Niesklasyfikowane Fortia
- Niesklasyfikowane Adler
- Niesklasyfikowane Lapp
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025