Instrukcja obsługi Trust Gamer Network Kit PCI

Trust Karta sieciowa/adapter Gamer Network Kit PCI

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Trust Gamer Network Kit PCI (5 stron) w kategorii Karta sieciowa/adapter. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 5 użytkowników na średnio 4.6 gwiazdek

Pobierz PDF

Strona 1/5

Trust Gamer Kit PCI

TRUST GAMER KIT PCI

Quick Installation Manual

Version 1.0

Trust Gamer Kit PCI

1. Introduction

The instruction manual is intended for users of the Trust Gamer Kit PCI. Some knowledge of

computers is necessary to install this product. If you have any questions, please consult one of

the Trust Customer Care Centers. You can find more information at the back of this instruction

manual.

This instruction manual describes how to install the software and how to solve problems that may

be encountered during the installation.

A detailed instruction manual for this product is contained on the CD-ROM. See chapter 3 for

instructions on how to read this manual.

2. Installation

Note: Files will be copied from the original Windows CD-ROM during installation.

Make sure that you use the same Windows CD-ROM that you used to install

Windows, otherwise Windows may no longer work.

2.1 Installing the network card

Note: Do not carry out any maintenance on your computer whilst it is switched on.

Prevent personal injury and damage to the device by removing the

computer's power plug from the wall socket.

Note: Install the drivers for the network card before connecting it to the network.

See chapter 2.2.

1. Turn off your PC.

2. Remove the plug from the wall socket.

3. Remove the computer casing (if necessary, read your computer's instruction manual).

4. Remove the metal cover plate from the PCI slot.

5. Insert the network card into the free PCI slot and screw the card firmly into place.

6. Close the PC.

7. Turn on the computer.

2.2 Installing the driver

Operating system 10MB network card

(RTL8029x)

100MB network card

(RTL8139x)

Windows 95 D:\RTL8029\WIN95 D:\RTL8139\WIN95

Windows 98 D:\RTL8029\WIN98 D:\RTL8139\WIN98

Windows NT 4 D:\RTL8029\WINNT D:\RTL8139\WINNT4

Windows 2000 Standard Windows 2000 driver D:\RTL8139\WIN2000

Table 1: Summary of drivers

2.2.1 Windows 95, 98 and 2000

1. Start Windows.

2. A network card will be detected automatically. Click on 'Next'.

3. Insert the CD-ROM containing the drivers into your CD-ROM drive.

Trust Gamer Kit PCI

4. Select Windows to search in a specific location. Give the location as shown in table 1.

Click on <Enter>.

5. The driver will be found. Follow the on-screen instructions to complete the installation.

6. Restart your computer.

A more detailed description of the installation and use of this product and how to set protocols

can be found in the instruction manual included on the CD-ROM. See chapters 7 to 10 for more

information. If necessary, also refer to your computer's instruction manual.

2.2.2 Windows NT 4.0

1. Start Windows NT and log on as ‘Administrator’.

2. Insert the CD-ROM containing the drivers into your CD-ROM drive.

3. Double click on the ‘Network’ icon in the ‘Control Panel’.

4. Select the 'Adapters' tab and click on 'Add'.

5. Click on 'Have Disk...'.

6. Give the location as shown in table 1. Click on 'OK'.

7. Select the adapter and click on 'OK' to continue. Click on 'Next' to continue.

8. Follow the on-screen instructions to complete the installation.

9. Restart Windows NT4 after completing the installation.

A more detailed description of the installation and use of this product and how to set protocols

can be found in the instruction manual included on the CD-ROM. See chapters 7 and 9 for more

information. If necessary, also refer to your computer's instruction manual.

2.3 Connecting to a network

1. Remove the network cable from the packaging.

2. Connect one end to the network card of computer 1.

3. Connect the other end to the network card of computer 2.

3. Acrobat Reader

3.1 Reading the electronic manual

1. Start the Trust Software Installer (Start – Run – [D:\Setup.exe]).

2. Select 'Read manual'.

3. Select the language you wish to use to read the manual.

4. The manual will be displayed on the monitor.

3.2 Printing the manual

1. Click on ‘Print’ in the ‘File’ menu (see figure 1).

Specyfikacje produktu

Marka:	Trust
Kategoria:	Karta sieciowa/adapter
Model:	Gamer Network Kit PCI
Kolor produktu:	Zielony
Długość kabla:	10 m
Technologia łączności:	Przewodowa
Przeznaczenie:	PC/Laptop
Maksymalna szybkość przesyłania danych:	100 Mbit/s
Wewnętrzny:	Tak
Standardowe rozwiązania komunikacyjne:	Ethernet
System operacyjny:	Windows 95, 98, ME, NT4, 2000
Interfejs hosta:	PCI
Minimalne wymagania systemowe:	PCI
Minimalna ilość pamięci RAM:	16 MB
Minimalna ilość miejsca w pamięci komputerowej:	10 MB
Minimalny procesor:	Pentium 100 MHz
Napęd CD-ROM:	Tak
Link/act led:	Tak
Połączenie przewodowe:	RJ45