Instrukcja obsługi Uniden BP-100
Uniden
Niesklasyfikowane
BP-100
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Uniden BP-100 (8 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 24 osób i została oceniona przez 12.5 użytkowników na średnio 4.7 gwiazdek
Strona 1/8

1
BP-100
Accessory Battery Pack
For more exciting new products please visit our website:
Australia: w.uniden.com.auww
New Zealand: w.uniden.co.nzww

2
◆ If any items are missing or damaged, contact your place of purchase
immediately. Never use damaged products!
◆ Need help? Get answers at our website:
www.uniden.com.au for Australian model
www.uniden.co.nz for New Zealand model.
◆ Do not expose the device to flames or dispose of it in a fire: the battery
may explode.
◆ Do not disassemble, modify, or attempt to repair any component of this
product.
◆ This unit is waterproof. expose this unit to rain or NOT DO NOT
moisture.
◆ Use only the batteries indicated in this manual.
What’s in the Box?
◆ 2 Rechargeable Battery (BT-694)
◆ Battery Box
Install Battery
1. Remove the battery from any protective packaging and discard the
packaging accordingly. To remove the cover of the battery box, press in
on the notch and slide the cover down and off.
2. Line up the battery connector with the jack inside the battery box; the
connector only fits one way.
3. Push the connector in until it clicks into place; tug gently on the wires to
make sure the battery is securely connected.
4. Replace the cover and slide it into place.
IMPORTANT SAFETY INSTRUCTIONS
GETTING STARTED
#
You can install up to 3 battery packs.

3
Connect AC Adaptor to base
1. Use the AC Adaptor of a compatible base to connect the power jack on
the Battery Box to a regular indoor power outlet.
2. Use the power cable to connect to the DC IN port of a compatible base.
Test the Connection
Pick the handset (of a compatible unit) and press the relevant button (to
start a call - eg, HOME/FLASH). If you don’t hear a dial tone, check the
connection between the base and the Battery box.
Power LED
LED What it indicates
OFF No AC adaptor, No charged battery.
ON AC adaptor powered, one or more battery is charging, or
powered.
With AC Adaptor
Without AC Adaptor (During a Black Out)
Pick the handset (of a compatible unit) and press the relevant button (to
start a call - eg, HOME/FLASH). If you don’t hear a dial tone, check the
connection between the base and the Battery box.
#Battery box will charge under this condition.
#
Charge completely (about 24 hours) before using.
The BP-100 battery box is connected in-line between the base and AC
adaptor of a compatible telephone.
Specyfikacje produktu
Marka: | Uniden |
Kategoria: | Niesklasyfikowane |
Model: | BP-100 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Uniden BP-100, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane Uniden
12 Stycznia 2025
4 Stycznia 2025
22 Grudnia 2024
15 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
1 Października 2024
29 Września 2024
29 Września 2024
Instrukcje Niesklasyfikowane
- Niesklasyfikowane Blustream
- Niesklasyfikowane Klarstein
- Niesklasyfikowane Premier Mounts
- Niesklasyfikowane Epiphan
- Niesklasyfikowane Sole Fitness
- Niesklasyfikowane Gretsch Guitars
- Niesklasyfikowane Elica
- Niesklasyfikowane Lexibook
- Niesklasyfikowane Gustavsberg
- Niesklasyfikowane MXL
- Niesklasyfikowane Furrion
- Niesklasyfikowane McCulloch
- Niesklasyfikowane Kindermann
- Niesklasyfikowane Alogic
- Niesklasyfikowane After Later Audio
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025