Instrukcja obsługi V7 BUSMUVS

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla V7 BUSMUVS (10 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 23 osób i została oceniona przez 6 użytkowników na średnio 4.2 gwiazdek

LED UV STERILIZATION BOX

Instruction manual

BUSMUVS

www.v7world.com

OVERVIEW

CONTROLSINSTRUCTIONS

USB Power Port

Open button

Control Panel

Power Switch

Battery Cover

1. Remove the USB cable from inside the Sterilizer

2. Select one of the two power modes:

•

Connect the USB-C cable to the power port on the rear of the box.

•

Connect the cable into a 5V /2A power adapter OR,

•

Open the bottom battery cover and install 4 AA batteries

3. Slide the power switch to the “ON” position, and you will hear a “beep” tone

4. Operate the sterilization box indoors on a at surface

5. If Unused for long time, open the bottom battery cover and remove 4 AA

batteries.

1. OPEN BUTTON - Press to open cover

2. STERILIZE TIME – Press to select Sterilize time

1.

2.

Power switch: Slide the power switch to the ON position, you’ll hear

a “beep” tone.

Open button: Press the open button on the cover to insert or remove

items. When the cover is opened, the “beep” tone will repeatedly

sound

Sterilize time: Press 5 to select the 5 min quick mode. A Blue LED

conrms your selection. Press 10 to select the 10 min eciency mode

Press 24h to select the 24h cycling mode. In this mode the LED UV

lamp works for 10 min per 1h interval for 24 hours.

Cycle nished:When sterilization is nished, you will hear 5 beeps

and the LED shuts o.

Auto Shut-o: If the cover is opened during operation, the sterilizer

will shut o. You must close the cover and select a new cycle to

resume.

Pause/Stop:You can stop the current mode by pressing the current

mode or change the mode by selecting a new mode.

Specyfikacje produktu