Instrukcja obsługi Viking VK20

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Viking VK20 (7 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 25 osób i została oceniona przez 2 użytkowników na średnio 4.1 gwiazdek

www. .co.ukmetaldetectors

Metal Detectors

1 Angela Street

Mill Hill, Blackburn

BB2 4DJ

t:+44 (0)1254 55887

f:+44 (0)1254 676901

e:viking@metaldetectors.co.uk

User Manual

Thank you for purchasing a VK-Series

detector from VIKING.This is one of a family

of microprocessor driven metal detectors

that are very simple to use yet provide

excellent performance.The VK20 is a motion

metal detector and the VK30 also provides

non-motion operation,which assists with the

accurate pinpointing of targets.

Please take time to read this booklet.It will guide

you through each of the available features to

ensure you get the best out of your detector.

The term 'motion' used above simply means the

search head needs to be kept moving in order to

detect metal items.This allows the

microprocessor to analyse the received signals

and discriminate against poor quality metals.

When a suitable target is detected, an audible

'beep' is heard either from the loudspeaker or

headphones (if connected).

Getting Started

1. Unpack The Detector

There are two main sections.The 'S' shaft, onto

which is mounted the control box, armrest and

detector stand, and the lower shaft with the

search head.

2. Assemble The Detector

Note the spring button clip protruding from near

the top end of the lower shaft.Slide the lower

shaft into the 'S' shaft, wrapping the cable

snugly, but not tightly, round the shaft.When

correctly aligned the spring button clip will click

into 1 of the 3 holes in the 'S' shaft.

3. Tighten the coupling

Turn the coupling to the 'lock' position as

indicated by the arrow.This makes a rigid

connection between the two parts of the shaft.

4. Insert Battery

The detector takes a single PP3 (alkaline) 9V

battery.This is placed in the battery

compartment on the back of the control box.

ENSURE THE BATTERY IS INSERTED THE

CORRECT WAY ROUND

Push the drawer back into the detector until it

clicks.Please note the drawer can only be

inserted the one way.

VK20 Display Panel

1. Off / On - Sensitivity Control

2. Discrimination Control

3. Detector Display

4. Inland / Beach Switch

VK20 & VK30

1

4

1

3

2

Specyfikacje produktu