Instrukcja obsługi Viking VK40

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Viking VK40 (6 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 27 osób i została oceniona przez 8 użytkowników na średnio 4.4 gwiazdek

www. .co.ukmetaldetectors

Metal Detectors

1 Angela Street

Mill Hill, Blackburn

BB2 4DJ

t:+44 (0)1254 55887

f:+44 (0)1254 676901

e:viking@metaldetectors.co.uk

User Manual

Thank you for purchasing the VK40 metal

detector from VIKING.This is one of a family

of microprocessor driven metal detectors

that are very simple to use yet provide

excellent performance.

Please take time to read this booklet.It will guide

you through each of the available features to

ensure you get the best out of your detector.

Getting Started

1.Unpack The Detector

There are two main sections.The 'S' shaft, onto

which is mounted the control box, and the lower

shaft with the search head.Note the spring

button near the end of the lower shaft.

2. Assemble The Detector

Slide the lower shaft into the 'S' shaft, wrapping

the cable snugly, but not tightly, round the shaft.

When correctly aligned the spring button on the

lower shaft will click into 1 of the 3 holes on the

underside of the 'S' shaft.

3. Tighten the coupling

Turn the coupling to the 'lock' position as

indicated by the arrow.This makes a rigid

connection between the two parts of the shaft.

4. Insert Battery

The detector takes a single PP3 (alkaline) 9V

battery.This is placed in the battery

compartment on the rear of the control box.

ENSURE THE BATTERY IS INSERTED THE

CORRECT WAY ROUND

Push the drawer back into the detector until it

clicks.Please note the drawer can only be

inserted the one way.

Your detector is now ready for use

To disassemble the detector, loosen the coupling

by turning it against the arrow and push in the

spring button. The lower shaft will now slide out

from the 'S' shaft.

1. Detector Display

2. On / Off Key

3. Menu Down / Motion Key

4. Pinpoint / Retune Key

5. Menu Up / All-Metal / Non-Motion Key

6. Menu Key

Detection Modes

The VK40 offers 3 methods of detection:

Motion Mode

When operating in motion mode the search head

must be kept moving to enable an object to be

VK40

1

4

1

3

2

5

6

Specyfikacje produktu