Instrukcja obsługi Vivotek AP-FXC-0110

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vivotek AP-FXC-0110 (1 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 18 osób i została oceniona przez 3 użytkowników na średnio 4.5 gwiazdek

VIVOTEK INC.

6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C.

| | |T: +886-2-82455282F: +886-2-82455532E: sales@vivotek.com

VIVOTEK USA, INC.

2050 Ringwood Avenue, San Jose, CA 95131

| | |T: 408-773-8686 F: 408-773-8298 E: salesusa@vivotek.com

VIVOTEK Europe

Randstad 22-133, 1316BW Almere, The Netherlands

T E: +31(0)36-5298-434 : saleseurope@vivotek.com

100m 100m

48W consumpon

Speed Dome

95W PoE Injector

AP-FXC-0110

PoE INGreen ONLAN: Data is being transmitted or received.

Yellow ONPWR: PoE IN port is connected to PSE.

OFFNo connection.

Power OUT#Green ONLAN: Data is being transmitted or received.

Yellow ONPWR: PoE OUT port is connected to PD.

OFFNo connection.

1. Install the device in a ventilated and dry place, that is free of electromagnetic source, vibration, moisture, and dust.

2. Make sure the ventilation openings on the extender are not blocked.

3. Use CAT5 or 6 UTP/STP cables. Avoid using low-quality cables, which will seriously limit the cabling distance.

AP-FXC-0110, AP-FXC-0210 PoE Extender

Quick Installation Guide

AP-FXC-0110: 1 PoE IN - to - 1 PoE OUT.

AP-FXC-0210: 1 PoE IN - to - 2 PoE OUT.

The AP-FXC-0110/0210 is a PoE extender capable of receiving 95W power from PSE. Multiple extenders can be

cascaded to increase the cabling distance.

IMPORTANT:

INTRODUCTION

LED DEFINITIONS

CONNECTION

• •1x PoE extender1x Quick Installation Guide

PACKAGE CONTENTS

Allspecicationsaresubjecttochangewithoutnoice.

Copyright © 2017 VIVOTEK INC. All rights reserved.

Following are the conditions for making the cabling:

1.Use18~19Ω,24AWGCAT5cables.

2. Typical VIVOTEK cameras stream size feature = 1080p@30fps - 6Mbps; 720p@30fps - 3Mbps.

Make sure the combined bandwidth consumption does not exceed the uplink bandwidth from the PoE switch.

NOTE: There are power losses due to cable resistance.

100m 100m100m

95W PoE Injector802.3af PoECamera

PoE CameraPoE Camera802.3af802.3at

AP-FXC-0210 AP-FXC-0210

DIP# ONTurn on PoE output for the PoE out port.

OFFTurn off PoE output for the PoE out port.

Note: For the AP-FXC-0110, DIP 1 is not functional.

DIP SWITCH DEFINITIONS

Specyfikacje produktu