Instrukcja obsługi Vivotek AU-002
Vivotek
Niesklasyfikowane
AU-002
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vivotek AU-002 (3 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 7 użytkowników na średnio 4.6 gwiazdek
Strona 1/3

AU-002
Network Speaker Driver
SIP & UDP • 20W • PoE+ • HTTPS
• Support SIP and UDP Broadcast Protocol
• Build in 20W Power Amplier to Drive Speaker Directly
• Powered from the Network Cable Using PoE+ IEEE 802.3at
• Remote Conguration and Firmware Upgrade by HTTPS

Application
VAST 2
Speaker Cable
PoE
Data
PoE Switch AU-002
Analog Speaker
Existing PA Speaker
AU-002
25 mm
110 mm
85 mm
Dimensions
Overview
AU-002 Network Speaker Driver provides the solution to convert traditional analog speaker to network speaker.
It can accept standard SIP call or multiple addressable UDP broadcast protocol supports network or Internet.
This IP driver supports standard VoIP CODEC like: G.711, G.722, G.726, G.729, it 32Kx 16bit CD quality music
playback function.
AU-002 is also compatible with VAST 2 for all the functionalities and allow users to upload their own audio clips on
VAST 2 for broadcasting.

Technical Specications
Model AU-002
Specication
Driver Impedance Lower to 3 ohm speaker totally
Average Min. Power 20W
Microphone 100Hz-16KHz Single point, SPL-44 ± 2db AT 2 KΩ
LED Luminous 3 x LED display status
Network
SIP Support RFC 3261(SIP base standard)
Interface WAN: RJ-45x1, 10/100Mbps Fast Ethernet port
Supported Protocols
SIP, IPv4/v6, RIPv2 / OSPF, HTTPS, QoS DSCP, FTP, TFTP,
SNMP v2c / v3, SNMP, IGMP, DHCP, SSHv2, PIM- DVMRP, RMON
Audio Codec G.711 a/uLaw, G.726, G.722, G.729, iLBC, L16
Support Function Auto provision, Audio tone testing, System log
Security Password protection, IP address lter, user access log, authentication
VAST 2 Integration (Extension License Required)
Two-way Communication Supported
Automatic Trigger Audio Clips Supported
General
Casing Plastic
Power PoE+ (Power over Ethernet), IEEE 802.3at
Operating Temperature -35°C ~ 60°C (-31°F ~ 140°F)
Dimensions 110x85x25 mm
Weight 115 g
Certications CE, FCC, LVD EN62368-1
Warranty 24 months
All specications are subject to change without notice. Copyright © VIVOTEK INC. All rights reserved. Ver. 2
6F, No.192, Lien-Cheng Rd., Chung-Ho, New Taipei City, 235, Taiwan, R.O.C. | T: +886-2-82455282 | F: +886-2-82455532 | E: sales@vivotek.com | W: www.vivotek.com
Specyfikacje produktu
Marka: | Vivotek |
Kategoria: | Niesklasyfikowane |
Model: | AU-002 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Vivotek AU-002, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Niesklasyfikowane Vivotek
16 Września 2024
16 Września 2024
15 Września 2024
15 Września 2024
15 Września 2024
14 Września 2024
14 Września 2024
14 Września 2024
14 Września 2024
14 Września 2024
Instrukcje Niesklasyfikowane
- Niesklasyfikowane Pointer
- Niesklasyfikowane Hama
- Niesklasyfikowane HiLook
- Niesklasyfikowane 4moms
- Niesklasyfikowane Z CAM
- Niesklasyfikowane G3 Ferrari
- Niesklasyfikowane IODD
- Niesklasyfikowane DW
- Niesklasyfikowane Mr. Heater
- Niesklasyfikowane Summit
- Niesklasyfikowane Arris
- Niesklasyfikowane Buzz Rack
- Niesklasyfikowane BRITA
- Niesklasyfikowane Think Tank
- Niesklasyfikowane Body Solid
Najnowsze instrukcje dla Niesklasyfikowane
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025
29 Stycznia 2025